Data Sheet 3A LOW DROPOUT LINEAR REGULATOR AZ1085 General Description Features The AZ1085 is a series of low dropout positive voltage regulators with a maximum dropout of 1.5V at 3A of load current. · · · · · · · The series features on-chip thermal shutdown. It also includes a bandgap reference and a current limiting circuit. The AZ1085 is available in 1.5V, 1.8V, 2.5V, 2.85V, 3.3V, 5.0V and adjustable versions. The fixed versions integrate the adjust resistors. The adjustable version can set the output voltage with two external resistors. Applications · · · · · · · · The AZ1085 series is available in standard packages of TO-263-2, TO-263-3, TO-220-3 and TO-252-2 (1). TO-263-3 Low Dropout Voltage: Typical 1.3V at 3A Current Limiting and Thermal Protection Output Current: 3A Current Limit: 4.5A Operating Junction Temperature: 0 to 125oC Line Regulation: 0.015% (Typical) Load Regulation: 0.1% (Typical) TO-263-2 High Efficiency Linear Regulators Battery Charger Post Regulation for Switching Supplies Microprocessor Supply Mother Board Power Supplies DVD-Video Player Telecom Equipment Set Top boxes and Web Boxes Modules' Supply TO-252-2 (1) TO-220-3 Figure 1. Package Types of AZ1085 Mar. 2007 Rev. 1. 3 BCD Semiconductor Manufacturing Limited 1 Data Sheet 3A LOW DROPOUT LINEAR REGULATOR AZ1085 Pin Configuration T Package (TO-220-3) D Package (TO-252-2 (1)) 3 INPUT OUTPUT 2 OUTPUT ADJ/GND 1 ADJ/GND 3 INPUT 2 1 S2 Package (TO-263-2) S Package (TO-263-3) 3 INPUT 3 INPUT 2 OUTPUT 2 OUTPUT (TAB) 1 ADJ/GND 1 ADJ/GND Figure 2. Pin Configuration of AZ1085 (Top View) Functional Block Diagram INPUT Thermal Protection + OUTPUT A1 A2 For Adjustable Output, disconnect A1 and A2, connect B For Fixed Output, connect A1 and A2, disconnect B B ADJ/ GND Figure 3. Functional Block Diagram of AZ1085 Mar. 2007 Rev. 1. 3 BCD Semiconductor Manufacturing Limited 2 Data Sheet 3A LOW DROPOUT LINEAR REGULATOR AZ1085 Ordering Information AZ1085 E1: Lead Free Blank: Tin Lead Circuit Type TR: Tape and Reel Blank: Tube ADJ: Adjustable Output 1.5: Fixed Output 1.5V 1.8: Fixed Output 1.8V 2.5: Fixed Output 2.5V 2.85: Fixed Output 2.85V 3.3: Fixed Output 3.3V 5.0: Fixed Output 5.0V Package D: TO-252-2 (1) T: TO-220-3 S: TO-263-3 S2: TO-263-2 Package TO-252-2 (1) TO-220-3 Temperature Range 0 to 125oC o 0 to 125 C Part Number Tin Lead Marking ID Lead Free Tin Lead Lead Free Packing Type AZ1085D-ADJ AZ1085D-ADJE1 AZ1085D-ADJ AZ1085D-ADJE1 Tube AZ1085D-ADJTR AZ1085D-ADJTRE1 AZ1085D-ADJ AZ1085D-ADJE1 Tape & Reel AZ1085D-1.5 AZ1085D-1.5E1 AZ1085D-1.5 AZ1085D-1.5E1 Tube AZ1085D-1.5TR AZ1085D-1.5TRE1 AZ1085D-1.5 AZ1085D-1.5E1 Tape & Reel AZ1085D-1.8 AZ1085D-1.8E1 AZ1085D-1.8 AZ1085D-1.8E1 Tube AZ1085D-1.8TR AZ1085D-1.8TRE1 AZ1085D-1.8 AZ1085D-1.8E1 Tape & Reel AZ1085D-2.5 AZ1085D-2.5E1 AZ1085D-2.5 AZ1085D-2.5E1 Tube AZ1085D-2.5TR AZ1085D-2.5TRE1 AZ1085D-2.5 AZ1085D-2.5E1 Tape & Reel AZ1085D-2.85 AZ1085D-2.85E1 AZ1085D-2.85 AZ1085D-2.85E1 Tube AZ1085D-2.85TR AZ1085D-2.85TRE1 AZ1085D-2.85 AZ1085D-2.85E1 Tape & Reel AZ1085D-3.3 AZ1085D-3.3E1 AZ1085D-3.3 AZ1085D-3.3E1 Tube AZ1085D-3.3TR AZ1085D-3.3TRE1 AZ1085D-3.3 AZ1085D-3.3E1 Tape & Reel AZ1085D-5.0 AZ1085D-5.0E1 AZ1085D-5.0 AZ1085D-5.0E1 Tube AZ1085D-5.0TR AZ1085D-5.0TRE1 AZ1085D-5.0 AZ1085D-5.0E1 Tape & Reel AZ1085T-ADJ AZ1085T-ADJE1 AZ1085T-ADJ AZ1085T-ADJE1 Tube AZ1085T-1.5 AZ1085T-1.5E1 AZ1085T-1.5 AZ1085T-1.5E1 Tube AZ1085T-1.8 AZ1085T-1.8E1 AZ1085T-1.8 AZ1085T-1.8E1 Tube AZ1085T-2.5 AZ1085T-2.5E1 AZ1085T-2.5 AZ1085T-2.5E1 Tube AZ1085T-2.85 AZ1085T-2.85E1 AZ1085T-2.85 AZ1085T-2.85E1 Tube AZ1085T-3.3 AZ1085T-3.3E1 AZ1085T-3.3 AZ1085T-3.3E1 Tube AZ1085T-5.0 AZ1085T-5.0E1 AZ1085T-5.0 AZ1085T-5.0E1 Tube Mar. 2007 Rev. 1. 3 BCD Semiconductor Manufacturing Limited 3 Data Sheet 3A LOW DROPOUT LINEAR REGULATOR AZ1085 Ordering Information (Continued) Package TO-263-3 TO-263-2 Temperature Range 0 to 125oC 0 to 125oC Part Number Tin Lead Marking ID Lead Free Tin Lead Lead Free Packing Type AZ1085S-ADJ AZ1085S-ADJE1 AZ1085S-ADJ AZ1085S-ADJE1 Tube AZ1085S-ADJTR AZ1085S-ADJTRE1 AZ1085S-ADJ AZ1085S-ADJE1 Tape & Reel AZ1085S-1.5 AZ1085S-1.5E1 AZ1085S-1.5 AZ1085S-1.5E1 Tube AZ1085S-1.5TR AZ1085S-1.5TRE1 AZ1085S-1.5 AZ1085S-1.5E1 Tape & Reel AZ1085S-1.8 AZ1085S-1.8E1 AZ1085S-1.8 AZ1085S-1.8E1 Tube AZ1085S-1.8TR AZ1085S-1.8TRE1 AZ1085S-1.8 AZ1085S-1.8E1 Tape & Reel AZ1085S-2.5 AZ1085S-2.5E1 AZ1085S-2.5 AZ1085S-2.5E1 Tube AZ1085S-2.5TR AZ1085S-2.5TRE1 AZ1085S-2.5 AZ1085S-2.5E1 Tape & Reel AZ1085S-2.85 AZ1085S-2.85E1 AZ1085S-2.85 AZ1085S-2.85E1 Tube AZ1085S-2.85TR AZ1085S-2.85TRE1 AZ1085S-2.85 AZ1085S-2.85E1 Tape & Reel AZ1085S-3.3 AZ1085S-3.3E1 AZ1085S-3.3 AZ1085S-3.3E1 Tube AZ1085S-3.3TR AZ1085S-3.3TRE1 AZ1085S-3.3 AZ1085S-3.3E1 Tape & Reel AZ1085S-5.0 AZ1085S-5.0E1 AZ1085S-5.0 AZ1085S-5.0E1 Tube AZ1085S-5.0TR AZ1085S-5.0TRE1 AZ1085S-5.0 AZ1085S-5.0E1 Tape & Reel AZ1085S2-ADJ AZ1085S2-ADJE1 AZ1085S2-ADJ AZ1085S2-ADJE1 Tube AZ1085S2-ADJTR AZ1085S2-ADJTRE1 AZ1085S2-ADJ AZ1085S2-ADJE1 Tape & Reel AZ1085S2-1.5 AZ1085S2-1.5E1 AZ1085S2-1.5 AZ1085S2-1.5E1 Tube AZ1085S2-1.5TR AZ1085S2-1.5TRE1 AZ1085S2-1.5 AZ1085S2-1.5E1 Tape & Reel AZ1085S2-1.8 AZ1085S2-1.8E1 AZ1085S2-1.8 AZ1085S2-1.8E1 Tube AZ1085S2-1.8TR AZ1085S2-1.8TRE1 AZ1085S2-1.8 AZ1085S2-1.8E1 Tape & Reel AZ1085S2-2.5 AZ1085S2-2.5E1 AZ1085S2-2.5 AZ1085S2-2.5E1 Tube AZ1085S2-2.5TR AZ1085S2-2.5TRE1 AZ1085S2-2.5 AZ1085S2-2.5E1 Tape & Reel AZ1085S2-2.85 AZ1085S2-2.85E1 AZ1085S2-2.85 AZ1085S2-2.85E1 Tube AZ1085S2-2.85TR AZ1085S2-2.85TRE1 AZ1085S2-2.85 AZ1085S2-2.85E1 Tape & Reel AZ1085S2-3.3 AZ1085S2-3.3E1 AZ1085S2-3.3 AZ1085S2-3.3E1 Tube AZ1085S2-3.3TR AZ1085S2-3.3TRE1 AZ1085S2-3.3 AZ1085S2-3.3E1 Tape & Reel AZ1085S2-5.0 AZ1085S2-5.0E1 AZ1085S2-5.0 AZ1085S2-5.0E1 Tube AZ1085S2-5.0TR AZ1085S2-5.0TRE1 AZ1085S2-5.0 AZ1085S2-5.0E1 Tape & Reel BCD Semiconductor's Pb-free products, as designated with "E1" suffix in the part number, are RoHS compliant. Mar. 2007 Rev. 1. 3 BCD Semiconductor Manufacturing Limited 4 Data Sheet 3A LOW DROPOUT LINEAR REGULATOR AZ1085 Absolute Maximum Ratings (Note 1) Parameter Symbol Value Unit TJ 150 oC Storage Temperature Range TSTG -65 to 150 o Lead Temperature (Soldering, 10sec) TLEAD 260 o Operating Junction Temperature Thermal Resistance (Note 2) ESD (Human Body Model) θJA C C TO-220-3 60 TO-252-2 (1) 100 TO-263-3 60 TO-263-2 60 ESD o C/W 2000 V Note 1: Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under"Recommended Operating Conditions" is not implied. Exposure to "Absolute Maximum Ratings" for extended periods may affect device reliability. Note 2: Absolute maximum ratings indicate limits beyond which damage to the component may occur. Electrical specifications do not apply when operating the device outside of its operating ratings. The maximum allowable power dissipation is a function of the maximum junction temperature, TJ(max), the junction-to-ambient thermal resistance, θJA, and the ambient temperature, TA. The maximum allowable power dissipation at any ambient temperature is calculated using: PD(max)=(TJ(max) -TA)/θJA. Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown. Recommended Operating Conditions Parameter Input Voltage Operating Junction Temperature Range Symbol Min VIN 0 TJ Mar. 2007 Rev. 1. 3 Max Unit 12 V 125 o C BCD Semiconductor Manufacturing Limited 5 Data Sheet 3A LOW DROPOUT LINEAR REGULATOR AZ1085 Electrical Characteristics Typicals and limits appearing in normal type apply for TJ=25oC. Limits appearing in Boldface type apply over the entire operating junction temperature range 0 to 125oC. Parameter Reference Voltage Output Voltage Line Regulation Symbol Conditions VREF VOUT Min Typ Max Unit AZ1085-ADJ, IOUT=10mA,VIN-VOUT=3V, TJ=25oC, 10mA≤IOUT≤3A, 1.5V≤VIN-VOUT≤5V 1.238 1.225 1.250 1.250 1.262 1.275 V AZ1085-1.5, IOUT=0mA, VIN=4.5V, TJ=25oC, 10mA≤ IOUT≤ 3A, 3.0V≤VIN≤ 6V 1.485 1.47 1.5 1.5 1.515 1.53 V AZ1085-1.8, IOUT=0mA, VIN=4.8V, TJ=25oC, 10mA≤ IOUT≤3A, 3.3V≤VIN≤7V 1.782 1.764 1.8 1.8 1.818 1.836 V AZ1085-2.5, IOUT=0mA, VIN=5.5V, TJ=25oC, 10mA≤IOUT≤3A, 4.0V≤VIN≤7V 2.475 2.45 2.5 2.5 2.525 2.55 V AZ1085-2.85, IOUT=0mA, VIN=6V, TJ=25oC, 10mA≤IOUT≤3A, 4.4V≤VIN≤8V 2.821 2.793 2.85 2.85 2.879 2.907 V AZ1085-3.3, IOUT=0mA, VIN=6.3V, TJ=25oC, 10mA≤ IOUT≤3A, 4.8V≤VIN≤ 8V 3.267 3.234 3.3 3.3 3.333 3.366 V AZ1085-5.0, IOUT=0mA, VIN=8V, TJ=25oC, 10mA≤ IOUT≤ 3A, 6.5V≤VIN≤10V 4.95 4.9 5 5 5.05 5.1 V 0.015 0.035 0.2 0.2 % AZ1085-ADJ, IOUT=10mA, 2.85V≤VIN≤10V AZ1085-1.5, IOUT=10mA, 3.0V≤VIN≤10V 0.5 1 6 6 mV AZ1085-1.8, IOUT=10mA, 3.3V≤VIN≤10V 0.5 1 6 6 mV AZ1085-2.5, IOUT=10mA, 4.0V≤ VIN≤10V 0.5 1 6 6 mV AZ1085-2.85, IOUT=10mA, 4.4V≤ VIN≤10V 0.5 1 6 6 mV AZ1085-3.3, IOUT=10mA, 4.8V≤ VIN≤10V 0.5 1 6 6 mV ∆VOUT Mar. 2007 Rev. 1. 3 BCD Semiconductor Manufacturing Limited 6 Data Sheet 3A LOW DROPOUT LINEAR REGULATOR AZ1085 Electrical Characteristics (Continued) Typicals and limits appearing in normal type apply for TJ=25oC. Limits appearing in Boldface type apply over the entire operating junction temperature range 0 to 125oC. Parameter Symbol Line Regulation ∆VOUT Load Regulation ∆VOUT Conditions Min Typ Max Unit AZ1085-5.0, IOUT=10mA, 6.5V≤VIN≤10V 0.5 1 10 10 mV AZ1085-ADJ, 0mA≤IOUT≤3A, VIN-VOUT=3V 0.1 0.2 0.3 0.4 % AZ1085-1.5, 0mA≤IOUT≤3A, VIN-VOUT=3V 3 7 15 20 mV AZ1085-1.8, 0mA≤IOUT≤3A, VIN-VOUT=3V 3 7 15 20 mV AZ1085-2.5, 0mA≤IOUT≤3A, VIN-VOUT=3V 3 7 15 20 mV AZ1085-2.85, 0mA≤IOUT≤3A, VIN-VOUT=3V 3 7 15 20 mV AZ1085-3.3, 0mA≤IOUT≤3A, VIN-VOUT=3V 3 7 15 20 mV AZ1085-5.0, 0mA≤ IOUT≤3A, VIN-VOUT=3V 5 10 20 35 mV 1.3 1.5 V Dropout Voltage VDROP IOUT=3A, ∆VREF, ∆VOUT=1% Current Limit ILIMIT VIN-VOUT=3V Minimum Load Current ILOAD (MIN) VIN=10V (AZ1085-ADJ) 3 10 mA VIN=10V (AZ1085) 5 10 mA Quiescent Current IQ Ripple Rejection PSRR 3.2 fRIPPLE=120Hz, COUT=25µF, IOUT=3A, VIN-VOUT = 3V 60 4.5 A 72 dB VIN = 4.25V, IOUT = 10mA 55 120 µA 10mA ≤ IOUT ≤ 3A, 1.5V ≤ VIN -VOUT ≤ 6V 0.2 5 µA Long Term Stability TA = 125oC, 1000Hrs 0.5 % Temperature Stability IOUT=10mA, VIN-VOUT=1.5V 0.5 % RMS Noise (% of VOUT) TA=25oC, 10Hz≤f≤10kHz 0.003 % Adjust Pin Current IADJ Adjust Pin Current Change ∆IADJ Mar. 2007 Rev. 1. 3 BCD Semiconductor Manufacturing Limited 7 Data Sheet 3A LOW DROPOUT LINEAR REGULATOR AZ1085 Typical Performance Characteristics 5 5 4 3 Load Regulation (mV) Line Regulation (mV) 4 3 2 1 2 1 0 -1 -2 -3 0 -4 -5 -1 0 25 50 75 100 0 125 25 50 75 100 125 o o Junction Temperature ( C) Junction Temperature ( C) Figure 4. Line Regulation vs. Junction Temperature Figure 5. Load Regulation vs. Junction Temperature 2.53 1.20 Output Voltage (V) Dropout Voltage (V) 2.52 1.15 1.10 2.51 2.50 2.49 1.05 2.48 1.00 0 25 50 75 100 2.47 125 0 o 25 50 75 100 125 o Junction Temperature ( C) Junction Temperature ( C) Figure 7. Output Voltage vs. Junction Temperature Figure 6. Dropout Voltage vs. Junction Temperature Mar. 2007 Rev. 1. 3 BCD Semiconductor Manufacturing Limited 8 Data Sheet 3A LOW DROPOUT LINEAR REGULATOR AZ1085 Typical Performance Characteristics (Continued) 1.30 7 1.25 1.20 Dropout Voltage (V) Short Circuit Current (A) 6 5 4 3 1.15 1.10 1.05 1.00 0.95 2 0.90 1 0.85 0.80 0.0 0 0 2 4 6 8 10 12 0.5 1.0 1.5 2.0 2.5 3.0 Output Current (A) Dropout Voltage (V) Figure 8. Short Circuit Current vs. Dropout Voltage Figure 9. Dropout Voltage vs. Output Current 1.28 0.84 Minimum Load Current (mA) Reference Voltage (V) 1.27 1.26 1.25 1.24 1.23 1.22 0.82 0.80 0.78 0.76 AZ1085-ADJ 1.21 0.74 1.20 0 25 50 75 100 0 125 20 40 60 80 100 120 o o Junction Temperature ( C) Junction Temperature ( C) Figure10. Reference Voltage vs. Junction Temperature Figure11. Minimum Load Current vs. Junction Temperature Mar. 2007 Rev. 1. 3 BCD Semiconductor Manufacturing Limited 9 Data Sheet 3A LOW DROPOUT LINEAR REGULATOR AZ1085 80 60 78 62 76 64 Adjust Pin Current (µA) Adjust Pin Current (µA) Typical Performance Characteristics (Continued) 74 72 70 68 66 66 68 70 72 74 64 76 62 78 80 0.0 60 0 20 40 60 80 100 120 o Figure12. Adjust Pin Current vs. Junction Temperature 1.5 2.0 2.5 3.0 40 ∆VOUT (20mV/Div) 100 0 -100 20 0 -20 3 6.5 1.5 5.5 VIN (1V/Div) ∆VOUT (100mV/Div) 1.0 Figure13. Adjust Pin Current vs. Output Current 200 IOUT (1.5A/Div) 0.5 Output Current (A) Junction Temperature ( C) 0 0.1A -1.5 4.5 3.5 2.5 -3 Time (200µs/Div) Time (100µs/Div) Figure 15. Line Transient Response (Conditions: VIN=4.5V to 6.5V, VOUT=2.5V, IOUT=200mA, CIN=1µF, COUT=10µF) Figure 14. Load Transient Response (Conditions: VIN=5.5V, VOUT=2.5V, IOUT=100mA to 3A, CIN=COUT=10µF) Mar. 2007 Rev. 1. 3 BCD Semiconductor Manufacturing Limited 10 Data Sheet 3A LOW DROPOUT LINEAR REGULATOR AZ1085 Typical Performance Characteristics (Continued) 24 90 22 Package: TO-220-3 80 70 18 60 16 PSRR (dB) Power Dissipation (W) 20 14 12 10 50 40 8 30 6 20 4 10 2 0 10 0 0 20 40 60 80 100 120 100 1k 10k 100k 1M Frequency (Hz) o Case Temperature ( C) Figure17. PSRR vs. Frequency Figure16. Power Dissipation vs. Case Temperature Mar. 2007 Rev. 1. 3 BCD Semiconductor Manufacturing Limited 11 Data Sheet 3A LOW DROPOUT LINEAR REGULATOR AZ1085 Typical Application VIN 10µF + VOUT AZ1085-ADJ VOUT VIN + ADJ 22µF R1 150Ω R2 150Ω VOUT=VREF* (1+R2/R1) + IADJ * R2 AZ1085-5.0 VIN 10µF + VIN GND VOUT VOUT + 22µF Figure 18. Typical Applications of AZ1085 Mar. 2007 Rev. 1. 3 BCD Semiconductor Manufacturing Limited 12 Data Sheet 3A LOW DROPOUT LINEAR REGULATOR AZ1085 Mechanical Dimensions TO-220-3 2.580(0.102) 3.380(0.133) 0.550(0.022) 1.350(0.053) 1.160(0.046) 1.760(0.069) 14.230(0.560) 16.510(0.650) φ1.500(0.059) 27.880(1.098) 30.280(1.192) 8.520(0.335) 9.520(0.375) 1.850(0.073) 9.660(0.380) 10.660(0.420) φ3.560(0.140) 4.060(0.160) Unit: mm(inch) 3° 0.200(0.008) 7° 3.560(0.140) 4.820(0.190) 2.080(0.082) 2.880(0.113) 7° 0.381(0.015) 60° 0.813(0.032) 8.763(0.345) 60° 0.381(0.015) 2.540(0.100) 2.540(0.100) Mar. 2007 Rev. 1. 3 0.356(0.014) 0.406(0.016) BCD Semiconductor Manufacturing Limited 13 Data Sheet 3A LOW DROPOUT LINEAR REGULATOR AZ1085 Mechanical Dimensions (Continued) TO-263-3 4.070(0.160) 4.820(0.190) Unit: mm(inch) 3° 9.650(0.380) 10.290(0.405) 8.840(0.348) 7.420(0.292) 1.150(0.045) 1.390(0.055) 1.270(0.050) 1.390(0.055) 70° 14.760(0.581) 15.740(0.620) 1.150(0.045) 1.390(0.055) 3° 0.510(0.020) 0.990(0.039) 2.540(0.100) 2.640(0.104) 2.700(0.106) 0.360(0.014) 0.400(0.016) 7° 2.200(0.087) 5.600(0.220) 0.020(0.001) 0.250(0.010) 2.390(0.094) 2.690(0.106) 8.640(0.340) 9.650(0.380) 7° 7.980(0.314) 2° 8° 0.380(0.015) 2.540(0.100) 2.540(0.100) 0° 6° Mar. 2007 Rev. 1. 3 2.540(0.100) BCD Semiconductor Manufacturing Limited 14 Data Sheet 3A LOW DROPOUT LINEAR REGULATOR AZ1085 Mechanical Dimensions (Continued) TO-263-2 4.070(0.160) 4.820(0.190) 9.650(0.380) 10.290(0.405) 8.840(0.348) 70° Unit: mm(inch) 3° 1.150(0.045) 1.390(0.055) 1.270(0.050) 1.390(0.055) 7.420(0.292) 0.020(0.001) 0.250(0.010) 2.540(0.100) 1.150(0.045) 1.390(0.055) 2.390(0.094) 2.690(0.106) 1.500(0.059) 14.760(0.581) 15.740(0.620) 3° 2.640(0.104) 2.700(0.106) 0.360(0.014) 0.400(0.016) 7° 2.200(0.087) 5.600(0.220) 8.640(0.340) 9.650(0.380) 7° 7.980(0.314) 2° 8° 0.510(0.020) 0.990(0.039) 0.380(0.015) 2.540(0.100) 2.540(0.100) 0° 6° Mar. 2007 Rev. 1. 3 2.540(0.100) BCD Semiconductor Manufacturing Limited 15 Data Sheet 3A LOW DROPOUT LINEAR REGULATOR AZ1085 Mechanical Dimensions (Continued) 1.350(0.053) 1.650(0.065) TO-252-2 (1) 6.350(0.250) 6.650(0.262) 5.200(0.205) 5.400(0.213) Unit: mm(inch) 2.200(0.087) 2.400(0.094) 0.430(0.017) 0.580(0.023) 4.300(0.169) 5.400(0.212) 5° 0.700(0.028) 0.900(0.035) 0.500(0.020) 0.700(0.028) 2.300TYP 4.500(0.177) 4.700(0.165) 1.400(0.055) 1.780(0.070) 5° 3° 4° 0.430(0.017) 0.580(0.023) Mar. 2007 Rev. 1. 3 4.800(0.189) 6.500(0.256) 3.800REF(0.150REF) 5.400(0.213) 5.700(0.224) 0.000(0.000) 0.127(0.005) 2.550(0.100) 2.900(0.114) 0.600(0.024) 0.900(0.035) 9.500(0.374) 9.900(0.390) 8° BCD Semiconductor Manufacturing Limited 16 http://www.bcdsemi.com IMPORTANT NOTICE BCD Semiconductor Manufacturing Limited reserves the right to make changes without further notice to any products or specifications herein. BCD Semiconductor Manufacturing Limited does not assume any responsibility for use of any its products for any particular purpose, nor does BCD Semiconductor Manufacturing Limited assume any liability arising out of the application or use of any its products or circuits. BCD Semiconductor Manufacturing Limited does not convey any license under its patent rights or other rights nor the rights of others. MAIN SITE BCD Semiconductor Manufacturing Limited BCD Semiconductor Manufacturing Limited - Wafer Fab Shanghai SIM-BCD Semiconductor Manufacturing Limited 800, Yi Shan Road, Shanghai 200233, China Tel: +86-21-6485 1491, Fax: +86-21-5450 0008 - IC Design Group Advanced Analog Circuits (Shanghai) Corporation 8F, Zone B, 900, Yi Shan Road, Shanghai 200233, China Tel: +86-21-6495 9539, Fax: +86-21-6485 9673 REGIONAL SALES OFFICE Shenzhen Office Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd. Shenzhen Office Advanced Analog Circuits (Shanghai) Corporation Shenzhen Office Room E, 5F, Noble Center, No.1006, 3rd Fuzhong Road, Futian District, Shenzhen 518026, China Tel: +86-755-8826 7951 Fax: +86-755-8826 7865 Taiwan Office BCD Semiconductor (Taiwan) Company Limited 4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei, Taiwan Tel: +886-2-2656 2808 Fax: +886-2-2656 2806 USA Office BCD Semiconductor Corporation 30920 Huntwood Ave. Hayward, CA 94544, U.S.A Tel : +1-510-324-2988 Fax: +1-510-324-2788