defining a degree of excellence TRANSFORMER 0559-3855-00 TM0036 SCHEMATIC Secondary RL = 100Ω 2 Primary 135Ω 5 4 M E C H A N I C A L S * Designed to reflect 135 ohms on primary with 100 ohms on the secondary. 3 6 * Longitudinal Balance is 60dB minimum from 200 to 1000Hz, and 40dB minimum at 15kHz. 1 * Dielectric Rating is 1000 VAC. Notch locates terminal #1 NOTCH PLACEMENT 1 bel 0559-3855-00 5 3 0.600(15.24) Max True Postion Grid 0.10(2.5) Typ (P.C. Pattern, Component Side) 4 Date Code Terminal numbers are for reference only. 0.80(20.32) Max 0.65(16.51) Part must insert fully to surface -Ain true position grid. 0.55(13.97) Ref 6 1 5 2 0.50(12.70) 4 3 ELECTRICALS @ 25 Part Number 0559-3855-00 -A 0.11(2.79) Min 0.400(10.16) Max 0.30 (7.62) Ref 0.027(0.69) X 0.046(1.17) 0.15(3.81) +/-0.01(0.25) .325(8.26) Ref O 0.06 0.06(1.51) Typ (1.52) Typ Grid is typically 0.15(3.81) square 6 2 0.55(13.87) 0.55(13.97) C. All dimensions in inches (mm). Dimension tolerance +/- 0.01(0.25) unless otherwise stated Leakage Capacitance Turns Ratio Primary Inductance Inductance (pF) Nom. +/- 2% (mH) Min (µH) Pins (4-6):(1-3) Pins (4-6) Pins (4-6) Pins (6 to 3) 1:1 200 22-43 45 DCR (ohms) Return Loss Insertion Frequency (dB) Typ. Loss (dB) Response +/- 0.25dB (dB) Pins (1-3) & 100Hz1kHz Pins (4-6) 100kHz 10kHz +/- 0.5dB Typ 100Hz-112kHz 16 - 19.5 1.25 +/- 1.0 15 32 Primary Inductance measured at 1kHz, 1.0VAC. Capacitance and Leakage Inductance measured at 10kHz, 0.5VAC.[Leakage has Pins (1-3) shorted]. Corporate Office Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302-4496 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: [email protected] Internet: http://www.belfuse.com T305 Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K. Tel: 44-1772-556601 Fax: 44-1772-888366