VDSL/POTS CO/CPE Splitter 0803-7700-10 FEATURES • Compact, single channel LPF (POTS) VDSL splitter • Minimum through hole footprint for increased port density • Complies with ANSI T1.424 Trial Use 600 ohms relevant to low pass function • Operating temperature -40° C to +85° C • RoHS compliant ELECTRICAL SPECIFICATIONS@25°C LPF Item 1 Name DC Resistance Specification Condition 25R max At the POTS I/F with Line Shorted 2 Tip > Ring Capacitance 125nF max 2 attached modems overall admittance capacitance 3 Insertion Loss -1.0 dB max 0.2 to 4 kHz 4 Stop Band Attenuation -65 dB min 25 kHz to 12 MHz -8 dB min ERL 5 6 Return Loss Group Delay -5 dB min SRL-L / SRL-H 200 uS max 0.2 to 3.2 kHz 250 uS max 3.2 to 4.0 kHz BLOCK DIAGRAM ©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.28.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com Page 1 VDSL/POTS CO/CPE Splitter 0803-7700-10 MECHANICAL ALL DIMENSIONS IN INCHES [MM]. TOLERANCE ±0.002 [0.05] UNLESS OTHERWISE STATED. Pin Number Signal 1 Tip 2 Ring 3 POTS_N 4 POTS_P ©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.28.06 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Stewart Connector 45/46 Riverside Medway City Estate Rochester, Kent ME2 4DP U.K. Tel 44-1634-722890 Fax 44-1634-716677 www.belfuse.com Page 2