HIGH FREQUENCY MAGNETICS T1/E1 Through Hole Hardened Transformer TM00127 • Designed to operate at the DS1 rate of 1.544 Mbits/s • Meets IEC 695, 2-2 flammability requirements • Winding (4-6) can handle a 6 A current surge for 1 second with no damage • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning • Operating temperature range: -40°C to +85° C • Reliability testing: Shock, vibration, temperature cycling, temperature - humidity - bias ELECTRICAL SPECIFICATIONS AT 25° C Part Number 2745AL2 Nominal Turns Ratio ± 2% Inductance1 mH Min (3-1):(4-6) (3-1) (3-1) 1 : 1.14 CT 1.25 0.85 Leakage Inductance µH max Interwinding Capacitance pF max (4-6) (3-1) (3-1) to (4-6) Minimum Interwinding Breakdown Voltage Vrms 0.40 1.8 14 1000 DCR Ω max 1. measured at 10 kHz, 0.1 Vac SCHEMATIC 2745AL2 3 4 5 CT 1 6 1 : 1.14 CT ©2000 Bel Fuse Inc. Specifications subject to change without notice. 09.00 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com T1-61 HIGH FREQUENCY MAGNETICS T1/E1 Through Hole Hardened Transformer TM00127 MECHANICAL 2745AL2 0.56 (14.22) MAX 0.46 (11.68) MAX TERMINAL 1 IDENTIFIER 0.35 (8.89) MAX 0.023 (0.584) SQ TYP (PHOSPHOR BRONZE, SOLDER COATED) 0.150 (3.81) 0.110 (2.79) ±0.010 (0.25) 1 2 3 6 5 4 0.250 (6.35) Unless otherwise specified, dimensions are nominal and in inches (millimeters). ©2000 Bel Fuse Inc. Specifications subject to change without notice. 09.00 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 198 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com T1-62