BCM93212 PRODUCT ® Brief DOCSIS/EuroDOCSIS 1.1 ADVANCED CABLE MODEM TERMINATION SYSTEM B C M 9 3 2 1 2 F E AT U R E S BCM93212 is a DOCSIS/EuroDOCSIS-1.0 and 1.1 • The based cable modem termination system (CMTS) reference design which incorporates: • 64/256/512/1024 QAM downstream modulation with FEC • QPSK, 16, 32 and 64 QAM burst TDMA demodulation • Digitally generated IF carrier that meets DOCSIS/EuroDOCSIS-1.1 and 1.1 spectral purity requirements without a SAW filter • DOCSIS/EuroDOCSIS programmable downstream transmit IF carrier center frequency and channel bandwidth • Master/Slave MAP, reference clock, timestamp synchronization, and 10/100/1000BASE-T front panel connectors • BCM3212 MAC hardware that simplifies registration, ranging, fragmentation, concatenation, encryption, and payload header suppression • Scheduler support for DOCSIS 1.1 best effort, polled, and unsolicited grant service flows • The BCM93212 basic system parameters include: • A BCM3212 Compact PCI V2.1 compliant base board with plug in connectors for 64/256/512/1024 QAM modulator and TDMA demodulator daughter cards Support for one QAM downstream channel • • Support for six programmable upstream channels that support all DOCSIS 1.0 / 1.1 and TDMA symbol rates and demodulation types. • 10/100/1000BASE-T network side interface • Seamless upgrade for legacy BCM93210 CMTS platforms using QNX RTOS S U M M A R Y O F B E N E F I T S • Provides complimentary system to the BCM93345, BCM93350 and BCM93360 subscriber cable modem and residential gateway reference design for product development and testing. • Supports DOCSIS/EuroDOCSIS 1.1 fragmentation and concatenation for Quality of Service (QoS). • Provides a highly integrated 6 x 1 CMTS reference design in a compact PCI form factor. Accelerates software development by providing source • code for core software functionality and low level diagnostics. • Reduces customers’ internal development expenses. • Leverages years of development work embodied in the Broadcom BCM93210 reference design. • Based on Broadcom’s field-proven QAMLink technology. • Reference design comes complete with: • Schematics and Gerber files • Bill of Materials (BOM) • Data sheets • Software source code and API BCM93212 Cable Modem Termination System (CMTS) Reference Design 5-65 MHz Upstream B C M 9 3 2 1 2 O V E R V I E W BCM3138 Dual TDMA Receiver BCM3138 BCM3138 Ethernet BCM3212 Advanced CMTS MAC WAN System CPU PCI Bus 44 MHz IF PA Routing/ Classification Engine LPF BCM3034 Advanced QAM Modulator The Broadcom BCM93212 QAMLink® DOCSIS/EuroDOCSIS Cable Modem Termination System (CMTS) Reference Design represents the industry’s first complete DOCSIS/EuroDOCSISbased silicon solution with TDMA upstream and advanced PHY downstream functions for the headend cable plant. The BCM93212 CMTS supports the DOCSIS/EuroDOCSIS 1.0 and 1.1 specification enabling QoS for the simultaneous processing of voice, video and data on a prioritized basis. The BCM93212 CMTS includes the BCM3034 Universal Advanced PHY QAMLink® Modulator, the BCM3212 DOCSIS/EuroDOCSIS 1.1 CMTS MAC and the BCM3138 Universal TDMA Burst Demodulator and provides all the necessary functionality required to receive and transmit high rate digital data to and from a cable plant. Functions include: • Hardware-supported messaging (ranging, registration, channel configuration) Downstream SDRAM (PHS, output queues) Memory The BCM93212 is complemented at the subscriber end by the BCM93345, BCM93350 and the BCM93360, DOCSIS/EuroDOCSIS-based cable modem and residential gateway silicon solutions. The BCM93360 is based on the BCM3360 single-chip residential gateway, which integrates all the major functions of a cable modem into a single device. Together, the BCM93212 and the BCM93360 provide vendors with a seamless end-to-end silicon solution for development and testing of an DOCSIS/EuroDOCSIS-based cable modem and cable modem termination system with TDMA upstream and advanced PHY downstream functions. Ordering Information: BCM93212 CL–DOCSIS CMTS BCM93212-E CL–EuroDOCSIS CMTS • Physical layer configurations (upstream baud rates, upstream channel descriptor and MAP variations, and FEC code-word size) • Baseline privacy support • Flexible PHY and MAC parameter settings and performance monitoring Broadcom®, the pulse logo, and Connecting everything® are trademarks of Broadcom Corporation and/or its subsidiaries in the United States and certain other countries. All other trademarks are the property of their respective owners. ® BROADCOM CORPORATION 16215 Alton Parkway, P.O. Box 57013 Irvine, California 92619-7013 © 2002 by BROADCOM CORPORATION. All rights reserved. 93212-PB02-R 11.22.02 Phone: 949-450-8700 FAX: 949-450-8710 Email: [email protected] Web: www.broadcom.com