BO LYMIN BG320240F Feature 1. SMT PCB with metal frame 2. Built-in controller SED1335 3. +5V single power supply 4. 1/240 duty cycle 5. Option: LED edge B/L, CCFL 6. Option: +3V single power supply 7. Option: negative voltage (built-in, external) 8. Option: touch panel Mechanical Data Item Standard Value Module Dimension 166.8 x 109.0 Viewing Area 122.0 x 92.0 Dot Size 0.34 x 0.34 Dot Pitch 0.36 x 0.36 Pin Assignment Pin Symbol 1 Vss Electronic Characteristics Function Power supply (GND) +5V(+3V option) Vdd Contrast Adjustment Vo Data type select Ao /WR(R/W) 80s: write signal 68s:R/W signal /RD(E) 80s: read signal 68s: enable clock Data bus line DB0-7 Chip select /CS /RST Reset signal Negative voltage output Vee SEL uP select (H:68 series L:80 series) Frame Ground FGND NC No connection 4.0 Dimension Symbol Condition Typical Unit Value Input Voltage Vdd Vdd = +5V 5.0 V Supply Current Idd Vdd = +5V 100 mA LCD Driving 23.5 V Vdd-Vo 25 oC Voltage Item CCFL Starting Voltage CCFL Driving Voltage CCFL Driving Current 166.8±0.5 152.0 141.0 122.0(VA) 115.18(AA A ) VFLS 25 oC 600 Vrms VFLD 25 oC 260 Vrms VFLD=260 IFLD Vrms/ 30KHZ 5.0 11.0 109.0±0.5 101.0 103.8 92.0(VA) 86.38(AA A ) 0 1 0.36 0.34 ots CON2 20 DOT SIZE SCALE 10/1 20 2 3 6 5 4 7~14 15 16 17 18 19 20 Unit mm mm mm mm 160.0±0.5 Conducl on Buttom side (pitch 1.0mm CCFL OR LED(WHITE) B/L mArms