Data Sheet 9W 940nm High Power Single Emitter Laser Diode on Submount SES9-940-01 The Bookham SES9-940-01 single emitter laser diode series has been designed to provide the high output power, high coupling efficiency and high reliability required for pumping next generation fiber lasers and for other high power laser diode applications. The proprietary E2 front mirror passivation process, developed at our Zurich site, prevents Catastrophic Optical Damage (COD) to the laser diode facet even at extremely high output powers. The single emitter laser diodes are p-side down mounted on an optimized submount providing very low thermal resistance. Features: • 3.6mm x 0.4mm laser diode • 90µm wide emitter • 9W operating power (p-side down mounted) • Highly reliable single quantum well MBE structure • Standard wavelength at 940nm (other available on request) • RoHS compliant Applications: • Fiber laser pumping • Material processing • Printing • Medical 1 Data Sheet Characteristics Parameter Symbol Typical Unit Pop 9 W λc 940 ± 10 nm ∆λ 4 nm dλc/dTop 0.3 nm/°C θ// θ⊥ 8 29 deg Polarization – TE – Threshold Current Ith 500 mA Slope Efficiency ηD=Pop/(Iop-Ith) 1.0 W/A Conversion Efficiency H=Pop/(Vop x Iop) > 50 % Series Resistance Rs 0.03 Ω Operating Current Iop 9.5 A Operating Voltage Vop 2.2 V Operating Temperature Top 25 ± 5 °C CW Output Power Center Wavelength [1] Spectral Width (FWHM) Wavelength Shift with Temperature Beam Divergence (FWHM) Parallel to Junction Perpendicular to Junction [1] Reduced wavelength window/extended range available on request (900-1070nm). Chip Dimensions 2 Parameter Symbol Typical Unit Chip Width b 400 µm Resonator Length l 3600 µm Chip Thickness d 150 µm Emitter Width w 90 µm Data Sheet Package Dimensions (mm) 3 Data Sheet RoHS Compliance Bookham is fully committed to environment protection and sustainable development and has set in place a comprehensive program for removing polluting and hazardous substances from all of its products. The relevant evidence of RoHS compliance is held as part of our controlled documentation for each of our compliant products. RoHS compliance parts are available to order, please refer to the ordering information section for further details. Ordering Information: SES9-940-01 9W 940nm Single Emitter Laser Diode on Submount Contact Information Bookham (Switzerland) AG EMEA Sales Contact ASIA Sales Contact Gunnar Stolze Patrick Lee Binzstrasse 17 8045 Zurich Switzerland • Tel: +41 79 635 3777 • Tel: +852 9197 7014 North America Sales Contact Japan Sales Contact Michael Cutler • Tel: +813 5285 0861 • Tel: +41 44 455 8787 • Fax:+41 44 455 8586 www.bookham.com [email protected] DANGER • Tel: +1 678 763 0777 Japan Laser Corporation Important Notice Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by Bookham before they become applicable to any particular order or contract. In accordance with the Bookham policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of Bookham or others. Further details are available from any Bookham sales representative. ISO 9001:2000 Certified INVISIBLE LASER RADIATION - AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION INVISIBLE LASER RADIATION AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION CLASS 4 LASER PRODUCT 4 REFERENCE IEC 60825Edition 1.2 MAX POWER 8W WAVELENGTH 900 - 1070nm CLASS IV LASER PRODUCT This product complies with 21CFR 1040.10 FM 68159 BH13477 Rev 1.0 April 2007 ©Bookham 2005. Bookham is a registered trademark of Bookham Inc.