BRIGHT LED ELECTRONICS CORP. BIR-HM133A-TRB SINCE 1981 ● Features: ●Package Dimensions: 1. Lens Appearance : Water Clear. 2. 3.2x1.6x1.4mm(1206) standard package. 3. Suitable for all SMT assembly methods. 4. Compatible with infrared and vapor phase reflow solder process. 5. Compatible with automatic placement equipment. 6. This product doesn’t contain restriction Substance, comply ROHS standard. ● Applications: 1. Remote Control. 2. Smoke Detector 3. Phtoto Detector NOTES: 1.All dimensions are in millimeters (inches). 2.Tolerance is ±0.10mm (0.004”) unless otherwise specified. 3.Specifications are subject to change without notice. 4. Automatic Control System ● Absolute Maximum Ratings(Ta=25℃) Parameter Symbol Rating Unit Power Dissipation Pd 100 mW Forward Current IF 50 mA Peak Forward Current ＊1 IFP 500 mA Reverse Volage VR 5 V Operating Temperature Topr -25℃~80℃ - Storage Temperature Tstg -30℃~85℃ - Soldering Temperature Tsol See Page6 - ＊1 Pulse With = 10us, 1%Duty Cycle.. Ver.2.0 Page 1 of 7 BRIGHT LED ELECTRONICS CORP. BIR-HM133A-TRB SINCE 1981 ● Electrical and optical characteristics(Ta=25℃) Parameter Symbol Condition Min. Typ. Max. Unit Radiant Power Ie IF=50mA 3.6 8.0 - Forward Voltage VF IF=50mA - 1.6 2.1 V Reverse Current IR VR=5V - - 50 µA ｍｗ/sr Peak Wave Length λp IF=50mA - 940 - nm Spectral Line Half-width Δλ IF=50mA - 50 - nm Ifp=20Ma PW=10uS DC=1% - 500 - - 200 - IF=50mA - 60 - Tr Rise/Fall Time Tf Veiwing Angle 2θ1/2 ns deg ● Typical Electro-Optical Characteristics Curves Fig.1 Relative spectral sensitivity vs wavelength Fig.2 Total power dissipation vs ambient temperature 1.0 60 Total power dissipation mW Relative Spectral Sensltivty 50 0.5 40 30 20 10 0 890 940 0 990 20 Wavelength (nm) 50 80 100 3.0 2.5 RELATIVE RADIANT POWER (NORMALIZED AT 20mA) 40 Forward current (mA) 60 Fig.4 RELATIVE LUMINOUS INTENSITY VS. AMBIENT TEMPERATURE Fig.3 Forward current vs forward voltage 30 20 10 0 40 Ambient temperature 1 2 3 4 2.0 1.5 1.0 0.5 0 -40 5 Forward voltage(v) -20 0 20 40 60 AMBIENT TEMPERATURE Ta( C) A RADIATION DIAGRAM Fig.5 Relative luminous intensity vs forward current 0 10 20 4.0 RELATIVE RADIANT INTENSITY RELATIVE RADIANT POWER(@20mA) 30 3.0 2.0 1.0 0 10 20 30 40 50 40 1.0 0.9 50 0.8 60 70 0.7 80 90 0.5 0.3 0.1 0.2 0.4 0.6 Forward current (mA) Ver.2.0 Page 2 of 7 BRIGHT LED ELECTRONICS CORP. BIR-HM133A-TRB SINCE 1981 ● Tapping and packaging specifications(Units: mm) USER DIRECTION OF FEED 13.0± 0.5 1.27± 0.1 1.5± 0.1 4.0 ± 0.1 2.0± 0.05 TRAILER 179± 1 13.0± 0.5 3.5± 0.1 3.5 ± 0.05 1.75 ± 0.1 CATHODE 4.0 ± 0.1 71.0± 0.1 END 5.3 ± 0.05 START 8.0 ± 0.3 ANODE 1.88± 0.1 LEADER 0.3 FIXING TAPE NOTE: 3000 pcs PER REEL ﹗●Package Method:(unit:mm) 10 bag/box 3000 pcs/reel 215 Bar Code Label 245 230 220 Aluminum Foil Bag 167 645 6 box/carton 230 334 Ver.2.0 Page 3 of 7 BRIGHT LED ELECTRONICS CORP. BIR-HM133A-TRB SINCE 1981 ● Bin Limits Power B i n L i m i t s ( A t 5 0 m A ) BIN CODE Min. (mcd) 8 3.06 Max. (mcd) 5.80 9 4.29 8.13 10 6.00 11 . 3 8 11 8.41 15.95 ● B IN： x PO W E R B I N C O D E Ver.2.0 Page 4 of 7 BRIGHT LED ELECTRONICS CORP. BIR-HM133A-TRB SINCE 1981 ● Reliability Test Classification Test Item Reference Standard Operation Life MIL-STD-750:1026 MIL-STD-883:1005 JIS C 7021 :B-1 High Temperature MIL-STD-202:103B High Humidity JIS C 7021 :B-11 Endurance Storage Test High MIL-STD-883:1008 Temperature JIS C 7021 :B-10 Storage Low Temperature JIS-C-7021 :B-12 Storage Temperature MIL-STD-202:107D Cycling MIL-STD-750:1051 MIL-STD-883:1010 JIS C 7021 :A-4 Thermal Shock MIL-STD-202:107D Environmental MIL-STD-750:1051 Test MIL-STD-883:1011 Solder MIL-STD-202:201A Resistance MIL-STD-750:2031 JIS C 7021 :A-1 Test Conditions Connect with a power If=50mA Ta=Under room temperature Test time=1,000hrs Ta=+65℃ ± 5℃ RH=90%-95% Test time=240hrs Result 0/20 0/20 High Ta=+85℃ ± 5℃ Test time=1,000hrs 0/20 Low Ta=-35℃ ± 5℃ Test time=1,000hrs 0/20 -35℃ ~ +25℃ ~ +85℃ ~ +25℃ 60min 20min 60min 20min Test Time=5cycle -35℃ ± 5℃ ~ +85℃ ± 5℃ 20min 20min Test Time=10cycle Preheating： 140℃-160℃,within 2 minutes. Operation heating： 235℃(Max.), within 10seconds. (Max.) 0/20 0/20 0/20 ● Judgment criteria of failure for the reliability Measuring items Collector Dark Current Collector Light Current Note: Symbol Id ISC Measuring conditions VCE=20V, H=1.0 mW/cm2 VCE= 5V, H=1.0 mW/cm2 1.U means the upper limit of specified characteristics. Judgment criteria for failure Over Ux2 Below SX0.5 S means initial value. 2.Measurment shall be taken between 2 hours and after the test pieces have been returned to normal ambient conditions after completion of each test. Ver.2.0 Page 5 of 7 BRIGHT LED ELECTRONICS CORP. BIR-HM133A-TRB SINCE 1981 ● Soldering : 1. Manual Of Soldering The temperature of the iron tip should not be higher than 300℃(572℉) and Soldering within 3 seconds per solder-land is to be observed. 2. Reflow Soldering Preheating : 140℃~160℃±5℃,within 2 minutes. Operation heating : 235℃(Max.) within 10 seconds.(Max) Gradual Cooling (Avoid quenching). 10 SEC. MAX. Temperature 140~160℃ 235℃ MAX. 4℃ /SEC. MAX. 4℃ /SEC. MAX. OVER 2 MIN. Time 3. DIP soldering (Wave Soldering) : Preheating : 120℃~150℃,within 120~180 sec. Operation heating : 245℃ ± 5℃ within 5 sec.260℃ (Max) Gradual Cooling (Avoid quenching). Temperature Soldering heat Max. 260 ℃ 245 ±5℃ within 5 sec. 120~150℃ Preheat 120~180 sec. Time ● Handling : Care must be taken not to cause to the epoxy resin portion of BRIGHT LEDs while it is exposed to high temperature. Care must be taken not rub the epoxy resin portion of BRIGHT LEDs with hard or sharp article such as the sand blast and the metal hook. Ver.2.0 Page 6 of 7