BRIGHT LED ELECTRONICS CORP. BL-BJ33V1 SINCE 1981 ● Features: ● Package Dimensions 1. Chip material: AlGaInP/GaAs 2. Emitted color : Super Orange 3. Lens Appearance : Water Clear 4. Low power consumption. 5. High efficiency. 6. Versatile mounting on P.C. Board or panel. 7. Low current requirement. 8. T-1 type package 9. This product don’t contained restriction substance, compliance ROHS standard. ● Applications: Notes: 1. TV set 1. All dimensions are in millimeters (inches). 2. Monitor 2. Tolerance is ±0.25mm (0.01”) unless otherwise specified. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. 3. Telephone 4. Computer 5. Circuit board ● Absolute maximum ratings(Ta=25℃) Parameter Symbol Rating Unit Power Dissipation Pd 100 mW Forward Current IF 30 mA Peak Forward Current*1 IFP 150 mA Reverse Voltage VR 5 V Operating Temperature Topr -40℃~80℃ Storage Temperature Tstg -40℃~85℃ Soldering Temperature Tsol 260℃(for 5 seconds) *1Condition for IFP is pulse of 1/10 duty and 0.1msec width. Ver.1.0 Page: 1 of 2 BRIGHT LED ELECTRONICS CORP. BL-BJ33V1 SINCE 1981 ● Electrical and optical characteristics(Ta=25℃) Parameter Symbol Condition Min. Typ. Max. Unit Forward Voltage VF IF=20mA - 2.2 2.6 V Luminous Intensity Iv IF=20mA - 1100 - mcd Reverse Current IR VR=5V - - 100 µA Peak Wave Length λp IF=20mA - 630 - nm Dominant Wave Length λd IF=20mA 620 - 630 nm Spectral Line Half-width ∆λ IF=20mA - 17 - nm Viewing Angle 2θ1/2 IF=20mA - 30 - deg ● Typical electro-optical characteristics curves Ver.1.0 Page: 2 of 2