BRIGHT LED ELECTRONICS CORP. BS-C503RD SINCE 1981 ● Features : 1. 0.50 inch (12.70mm) Digit Height. 2. Continuous uniform segments. 3. Low power requirement. 4. Excellent characters appearance. 5. Solid state reliability. 6. Categorized for luminous intensity. 7. Direct drive common cathode. ● 1. Package Dimensions : 7.30(.287) 10 19.00(.748) 12.70(.500) 12.80(.504) 1.5(.059) 15.24(.600) 1.00(.039) Description : 8.00(.315) The BS-C503RD is a 12.70mm (0.50") high single digit seven segments display. 2. ● This product use Yellow chips, which are 6.3±0.5(.248±020) 0.50(.020) 2.45(.096) made from GaAsP on GaP substrate. 3. This product have a black face and white segments. 4. This product doesn't contain restriction substance, comply ROHS standard ● Notes: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(.01")unless otherwise specified. 3. Specifications are subject to change without Internal Circuit Diagram : 1.1 Page 1 of 4 Ver.1.0 BRIGHT LED ELECTRONICS CORP. BS-C503RD SINCE 1981 ● Absolute Maximum Ratings(Ta=25℃) Parameter Symbol Rating Unit Power Dissipation Per Segment Pd 80 mW Forward Current Per Segment IF 30 mA IFP (Duty 1/10, 1KHZ) 150 mA VR 5 V Operating Temperature Topr -40℃~80℃ - Storage Temperature Tstg -40℃~85℃ - Soldering Temperature (1/16" From Body) Tsol 260℃ For 5 Seconds - Peak Forward Current Per Segment Reverse Voltage Per Segment ● Electrical And Optical Characteristics(Ta=25℃) Parameter Symbol Condition Min. Typ. Max. Unit Forward Voltage Per Segment Vf IF=10mA - 2.0 2.5 V Luminous Intensity Per Segment Iv IF=10mA - 2.0 - mcd Reverse Current Per Segment IR VR=5V - - 100 µA Peak Wave Length λp IF=10mA - 585 - nm Dominant Wave Length λd IF=10mA 587 - 594 nm Spectral Line Half-width ∆λ IF=10mA - 35 - nm Ver.1.0 Page 2 of 4 BRIGHT LED ELECTRONICS CORP. BS-C503RD SINCE 1981 Typical Electro-Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) Fig.1 Relative Radiant Intensity VS. Wavelength Relative Radiant Intensity 1.0 0.5 0 500 530 560 Fig.2 Forward Current VS. Forward Voltage 40 30 20 10 0 1 2 3 4 Forward Voltage (V) 5 Fig.4 Relative Luminous Intensity VS. Forward Current 2.0 1.0 0 20 30 40 Forward Current(mA) 3.0 50 650 680 Fig.3 Relative Luminous Intensity VS. Ambient Temperature 2.5 2.0 1.5 1.0 0.5 0 -40 50 3.0 10 620 -20 0 20 40 60 Ambient Temperature Ta( C) Forward Current(mA) 4.0 590 Wavelength(nm) Relative Luminous Intensity (@20mA) Forward Current (mA) 50 Relative Luminous Intensity (@20mA) ● Fig.5 Forward Current Derating Curve VS. Ambient Temperature 40 30 20 10 0 20 40 60 80 100 120 Ambient Temperature Ta( C) Ver.1.0 Page 3 of 4 BRIGHT LED ELECTRONICS CORP. BS-C503RD SINCE 1981 ● Bin Limits 1. Intensity Bin Limits (At IF= 10mA) ● Bin Code Min. (mcd) Max. (mcd) H 1.21 1.63 J 1.57 2.12 K 2.04 2.76 Bin： x Intensity bin code Ver.1.0 Page 4 of 4