3.1 mm Round Type LED, Viewing Angle - 60° 32M Series Package Dimension Directivity Radiation All Dimensions are in mm (inch) Electrical Characterstics Electro - Optical Part No. Chip Material Emitted Colour Lens Colour Wave Length λP (nm) Characterstics (If = 20mA) Vf (v) Typ. Max Iv (mcd) 32M70D-4001 GaP/GaP Hi-Red Red Diffused 700 1.8 2.6 2 32M70T-4001 GaP/GaP Hi-Red Red Transparent 700 1.8 2.6 10 32M71D-4001 GaAsP/GaP Hi-Eff Red Red Diffused 640 1.8 2.6 20 32M71T-4001 GaAsP/GaP Hi-Eff Red Red Transparent 640 1.8 2.6 150 32M41D-4001 GaP/GaP Yellow Green Green Diffused 570 1.8 2.6 10 32M41T-4001 GaP/GaP Yellow Green Green Transparent 570 1.8 2.6 50 32M51D-4001 GaAsP/GaP Yellow Yellow Diffused 585 1.8 2.6 10 32M51T-4001 GaAsP/GaP Yellow Yellow Transparent 585 1.8 2.6 50 32M61D-4001 GaAsP/GaP Orange Orange Diffused 605 1.8 2.6 10 32M61T-4001 GaAsP/GaP Orange Orange Transparent 605 1.8 2.6 50 32M11D-4001 GaN Blue Blue Diffused 470 2.6 3.8 200 32M11C-4001 GaN Blue Water 470 2.6 3.8 1000 32M22C-4001 GaN Blue Green Water 505 2.6 3.8 5000 32M32C-4001 GaN Green Water 525 2.6 3.8 5000 32M82C-4001 GaN White Water 2.6 3.8 2000 32M82W-4001 GaN White Water Diffused 2.6 3.8 500 32M_LEDRev1_100506 Continental Device India Limited Page 1 of 2 Other Parameters applicable for all LEDs 32M Series Electrical Parameter (at T a = 25ºC) Reverse Voltage Vr Forward Current If Forward Current Peak Ifp* Power Pd Operating Temp Topr Storage TempTstg (v) (mA) (mA) (mW) (ºC) (ºC) Green (GaP) 6 25 100 80 -25 ~ +80 -40 ~ +40 Red (GaP) 6 25 100 80 -25 ~ +80 -40 ~ +40 6 25 100 80 -25 ~ +80 -40 ~ +40 6 25 100 80 -25 ~ +80 -40 ~ +40 6 30 100 80 -25 ~ +80 -40 ~ +40 6 30 100 80 -25 ~ +80 -40 ~ +40 6 30 100 80 -25 ~ +80 -40 ~ +40 6 30 100 80 -25 ~ +80 -40 ~ +40 6 30 100 170 -25 ~ +80 -40 ~ +40 Colour Orange (GaAsP/GaP) Yellow (GaAsP/GaP) Ultra Yellow (AlGaInP) Ultra Orange (AlGaInP) Ultra Red (AlGaInP) Ultra Yellow Green Blue (GaN/SiC) * 1/10 Duty Cycle. 0.1 ms Pulse Width Soldering Instructions DIP and Wave Soldering Types Iron Soldering (1.5 mm Iron Tip) Distance Max Soldering from Solder to case Time Temp of Soldering Bath Max Soldering Time Distance from Solder Joint to Case Temp of Soldering Iron ≤ 260 ºC 3S >2mm ≤ 300 ºC 3S >2mm ≤ 260 ºC 5S >4mm ≤ 300 ºC 5S >4mm LEDs Component Disposal Instructions 1. All Devices are RoHS compliant, customers are requested to please dispose as per prevailing Environmental Legislation of their Country. 2. In Europe, please dispose as per EU Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). Disclaimer The product information and the selection guides facilitate selection of the nxt LEDs best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the LED(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD are believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual LEDs or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s).CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-2579 6150, 4141 1112 Fax + 91-11-2579 5290, 4141 1119 [email protected] www.cdilsemi.com 32M_LEDRev1_100506 Continental Device India Limited Page 2 of 2