Continental Device India Limited An ISO/TS 16949, ISO 9001 and ISO 14001 Certified Company SILICON PLANAR POWER TRANSISTORS CJF2955 PNP CJF3055 NPN TO-220FP Fully Isolated Plastic Package General Purpose Amplifier and Switching Applications. ABSOLUTE MAXIMUM RATINGS. DESCRIPTION Collector Emitter (Sustaining) Voltage Collector Emitter Voltage Emitter Base Voltage RMS Isolation Voltage ( for 1sec,R.H. <30%, TA=25ºC ) Collector Current Base Current Total Power Dissipation @ Tc=25ºC Derate Above 25ºC Total Power Dissipation @ Ta=25ºC Derate Above 25ºC Operating and Storage Junction Temperature Range THERMAL RESISTANCE From Junction to Ambient From Junction to Case SYMBOL VALUE UNIT VCEO (sus) VCES VEBO (1) VISOL (a) (b) IC IB PD ** 90 90 5 3500 1500 10 6 30 0.25 2 0.016 - 55 to +150 V V V VRMS VRMS A A W W/ºC W W/ºC ºC 62.5 4 ºC/W ºC/W PD Tj,Tstg Rth (j-a) Rth (j-c)** TL Lead Temperature for Soldering Purpose 260 ºC **Measurement made with thermocouple contacting the bottom insulated mounting surface (in a location beneath the die), the device mounted on a heatsink with thermal grease and a mounting torque of >6 in.lbs. (1) RMS Isolation Voltage : (a) 3500 VRMS with Package in Clip Mounting Position (b) 1500 VRMS with Package in Screw Mounting Position (for 1sec, R.H.<30% ,Ta=25ºC; Pulse Test: Pulse Width <300µs, Duty Cycle<2%) ELECTRICAL CHARACTERISTICS (Tc=25ºC unless specified otherwise) DESCRIPTION SYMBOL TEST CONDITION Collector Emitter sustaining Voltage Collector Cut off Current VCEO (sus) * ICBO ICES IEBO IC=200mA, IB=0 VCB=90V, IE=0 VCE=90V, VBE=0 VEB=5V, IC=0 Emitter Cut off Current Continental Device India Limited Data Sheet MIN MAX UNIT 1 1 1 V µA µA µA 90 Page 1 of 4 SILICON PLANAR POWER TRANSISTORS CJF2955 PNP CJF3055 NPN TO-220FP Fully Isolated Plastic Package ELECTRICAL CHARACTERISTICS (Tc=25ºC unless specified otherwise) DESCRIPTION DC Current Gain SYMBOL hFE * Collector Emitter Saturation Voltage VCE(Sat) * Base Emitter on Voltage VBE(on) * DYNAMIC CHARACTERISTICS Current Gain - Bandwidth Product fT TEST CONDITION MIN MAX IC=4.0A, VCE=4V IC=10A, VCE=4V IC=4A, IB=0.4A IC=10A, IB=3.3A IC=4.0A, VCE=4V 20 5 100 IC=500mA, VCE=10V 2 1 2.5 1.5 UNIT V V V MHz f=500kHz * Pulse Test: Pulse Width =5ms, Duty Cycle <10 % Continental Device India Limited Data Sheet Page 2 of 4 CJF2955 PNP CJF3055 NPN TO-220FP Fully Isolated Plastic Package TO-220FP Fully Isolated Plastic Package A C D K L F E B 1 2 3 M DIM MIN MAX A 9.96 10.36 B 2.60 3.00 C 4.50 4.90 D 3.10 3.30 E 7.90 8.20 F 16.87 17.27 G 0.45 0.50 H 2.56 2.96 J 2.74 K 2.34 — L — 30.05 1 2 3 Pin Configuration 1. Base 2. Collector 3. Emitter 3.08 — J J M 0.80 All diminsions in mm. G H TO-220 FP Tube Packing End Pin 536.00 Label ±1.5 13.74 DEVICE NAME 32.85 Sr. QTY. 50 Pcs./Tube 6.87 Tube Thickness A ll D im e nsio ns in m m AMMO PACK SIZE ME NA VICE DE Sr. . Qty 92.0 ME NA ICE DEVSr. Qty. Label .0 538 0 75.0 20 Tubes/Ammo Pack 1000 Pcs./Ammo Pack Packing Detail PACKAGE Details TO-220FP STANDARD PACK Net Weight/Qty 200 pcs/polybag 396 gm/200 pcs 50 pcs/tube 135 gm/50 pcs Continental Device India Limited Size INNER CARTON BOX Qty 3" x 7.5" x 7.5" 3.5" x 3.7" x 21.5" Data Sheet 1K 1K Size OUTER CARTON BOX Qty Gr Wt 17" x 15" x 13.5" 19" x 19" x 19" 16K 10K 36 kgs 28 kgs Page 3 of 4 Notes CJF2955 PNP CJF3055 NPN TO-220FP Fully Isolated Plastic Package Disclaimer The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD is believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-2579 6150, 5141 1112 Fax + 91-11-2579 5290, 5141 1119 www.cdilsemi.com [email protected] CJF2955_3055 Rev100901 Continental Device India Limited Data Sheet Page 4 of 4