PRODUCT SPECIFICATION DATE: 05/25/2004 cosmo SMD LED : ELECTRONICS CORPORATION NO. 61L30008 KL-150URO SHEET 1 OF 9 REV. 1 UNIT:MM TOLERANCE: ± 0.25 Part No. KL-150URO Emitting Color Super brightness red Material Lens Type AlGaInP Water Clear Iv (IF=20mA) MIN (mcd) TYP (mcd) 30 60 Viewing Angle 2θ1/2 120∘ PRODUCT SPECIFICATION DATE: 05/25/2004 cosmo ELECTRONICS CORPORATION SMD LED : KL-150URO SHEET 2 OF 9 QR Absolute maximum ratings (TA=25℃) Reverse voltage Forward current Forward current(Peak) NO. 61L30008 Red (AlGaInP) REV. 1 Unit VR IF IFP 5 30 150 V mA mA Pd 50 mW TOP ℃ ℃ ℃ ℃ 1/10 Duty Cycle,0.1ms Pulse Width Power dissipation LED LAMPS: Operating temperature Storage temperature TST -40~+85 -40~+85 LED DISPLAYS: Operating temperature Storage temperature TA TSTG -40~+85 -40~+85 Operating characteristics (TA=25℃) Forward voltage(typ.) IF=20mA Forward voltage(max.) IF=20mA Reverse current(max.) VR=5V Wavelength at dominant emission(typ.) IF=20mA Wavelength at peak emission(typ.) IF=20mA Spectral line half-width IF=20mA Capacitance VF=0V,f=1MHz QR Red (AlGaInP) Unit VF 2.4 V VF 2.6 V IR 10 uA λD 630 nm λP 650 nm Δλ 22 nm C 25 pF PRODUCT SPECIFICATION DATE: 05/25/2004 cosmo SMD LED : KL-150URO ELECTRONICS CORPORATION Luminous Intensity Relative Value at IF=20mA 50 Forward Current(mA) NO.61L30008 40 30 20 10 SHEET 3 OF 9 3.0 2.5 2.0 1.5 1.0 0.5 0 0 1.5 1.7 1.9 2.1 2.3 0 2.5 10 20 30 40 Forward Voltage(V) IF-Forward Current(mA) Forward Current Vs. Forward Voltage Luminous Intensity Vs. Forward Current 50 50 Relative Luminous Intensity Forward Current IF (mA) REV. 1 40 30 20 10 0 0 20 40 60 80 100 Ambient Temperature TA(℃) Forward Current Derating Curve 1.4 1.2 1 0.8 0.6 0.4 0.2 0 -30 20 70 Ambient Temperature TA(℃) Luminous Intensity Vs. Ambient Temperature 120 PRODUCT SPECIFICATION DATE: 05/25/2004 cosmo SMD LED : ELECTRONICS CORPORATION NO. 61L30008 KL-150URO 0∘ 10∘ SHEET 4 OF 9 20∘ 30∘ 1.0 40∘ 50∘ 60∘ 70∘ 80∘ 90∘ 0.5 0∘ View Angle 2θ1/2=120∘ 0.5 REV. 1 PRODUCT SPECIFICATION DATE: 05/25/2004 osmo ELECTRONICS CORPORATION SMD LED : NO. 61L30008 KL-150URO SHEET 5 OF 9 UNIT:MM TOLERANCE: ± 0.25 TYPE PACKAGE:2000 OR 1000PCS/REEL REEL”T”:14mmTYP REV. 1 PRODUCT SPECIFICATION DATE: 05/25/2004 cosmo SMD LED : ELECTRONICS CORPORATION NO. 61L30008 KL-150URO SHEET 6 OF 9 UNIT:MM The following soldering patterns are recommended for reflow-soldering: For reflow soldering REV. 1 PRODUCT SPECIFICATION DATE: 05/25/2004 cosmo ELECTRONICS CORPORATION SMD LED : NO. 61L30008 KL-150URO SHEET 7 OF 9 UNIT:MM TOLERANCE: ± 0.25 REV. 1 PRODUCT SPECIFICATION DATE: 05/25/2004 cosmo SMD LED : NO. 61L30008 KL-150URO ELECTRONICS CORPORATION SHEET 8 OF 9 REV. 1 SOLDERING SMT REFLOW SOLDERING INSTRUCTIONS TEMPERATURE X A M c e s 0 1 Temp (° C) 230 4° C/sec max 140~160° C 4° C/sec max X A M c e s 5 3 c e s 0 2 1 ~ 0 6 Time SOLDERING INSRTUCTIONS DIP AND WAVE SOLDERING TYPES IRON SOLDERING(WITH 1.5mm IRON TIP) DISTANCE FORM TEMPERATURE OF SOLDERING SOLDER JOINT IRON TO CASE MAXLMUM DISTANCE FROM SOLDERING SOLDER JOINT TO CASE TIME TEMPERATURE OF THE SOLDERING BATH MAXLMUM SOLDERING TIME ≦260℃ 3S >2mm ≦260℃ 3S >2mm ≦260℃ 5S >4mm ≦260℃ 5S >4mm DISPLAYS ≦260℃ 3S >2mm ≦260℃ 3S >2mm DISPLAYS ≦260℃ 3S >2mm ≦260℃ 3S >2mm LEDS PRODUCT SPECIFICATION DATE: 05/25/2004 cosmo ELECTRONICS CORPORATION SMD LED : NO. 61L30008 KL-150URO SHEET 9 OF 9 REV. 1 SMD HANDLING AND APPLICATION PRECAUTIONS STORAGE (1.1)It is recommended to store the devices in accordance with the following conditions: Humidity: 60%RH Max. Temperature: 5℃~30℃ (41℉~86℉) (1.2)Shelf life in sealed bag: 12 month at <5℃~30℃ and <30%RH. After the package is opened, the products should be used within 72hrs. Or they should be kept at ≦20%RH in zip -locked sealed bags. DRY PACK AND BAKING SMD LEDs are MOISTURE SENSITIVE devices. Avoid absorbing moisture at any time during transportation and/or storage. It is recommended to bake before soldering when the pack is unsealed after 72 hrs, or any suspicious moisture being found. Bake devices in accordance with the following conditions: (a) 60±3℃ x (12~24hrs) and <5%RH, taped reel type (b) 100±3℃ x (45min~1hr), loose packing type, or (c) 130±3℃ x (15~30min), loose packing type ELECTRIC STATIC DISCHARGE(ESD) PROTECTION Materials with GaN, InGaN, AlInGaP are STATIC SENSITIVE devices. They will be packed in anti-static bags. ESD protection must be deliberatively observed from the initial design stage. The static -electric discharge may result in severe malfunction of the devices. In the events of manual working in process, make sure the devices are well protected from ESD at any time. Surge before and during handling products.