1/3 VIBLSD1-SIP Series DC-DC Converter Rev. 12-2005 Description Features Designed to convert fixed voltages into an isolated regulated voltage, the VIBLSD1-SIP series is well suited for providing boardmount local supplies in a wide range of applications, including mixed analog/digital circuits, test & measurement equip., process/machine controls, datacom/telecom fields, etc... ·Isolated 1 W output ·Regulated ·High efficiency to 79% ·Single voltage output ·Small footprint ·SIP package style ·Industry standard pinout ·UL94-V0 package ·No heatsink required ·1K Vdc isolation ·Temperature range: -40°C~+85°C ·No external component required ·Low cost Model Number VIBLSD1-S5-S5-SIP VIBLSD1-S5-S9-SIP VIBLSD1-S5-S12-SIP VIBLSD1-S5-S15-SIP VIBLSD1-S12-S5-SIP VIBLSD1-S12-S9-SIP VIBLSD1-S12-S12-SIP VIBLSD1-S12-S15-SIP VIBLSD1-S24-S5-SIP VIBLSD1-S24-S9-SIP VIBLSD1-S24-S12-SIP VIBLSD1-S24-S15-SIP Input Voltage Nominal Range 5 Vdc 4.75~5.25 Vdc 5 Vdc 4.75~5.25 Vdc 5 Vdc 4.75~5.25 Vdc 5 Vdc 4.75~5.25 Vdc 12 Vdc 11.4~12.6 Vdc 12 Vdc 11.4~12.6 Vdc 12 Vdc 11.4~12.6 Vdc 12 Vdc 11.4~12.6 Vdc 24 Vdc 22.8~25.2 Vdc 24 Vdc 22.8~25.2 Vdc 24 Vdc 22.8~25.2 Vdc 24 Vdc 22.8~25.2 Vdc Output Voltage 5 Vdc 9 Vdc 12 Vdc 15 Vdc 5 Vdc 9 Vdc 12 Vdc 15 Vdc 5 Vdc 9 Vdc 12 Vdc 15 Vdc Output Current Max. Min. 150 mA 15 mA 111 mA 12 mA 83 mA 9 mA 67 mA 7 mA 150 mA 15 mA 111 mA 12 mA 83 mA 9 mA 67 mA 7 mA 150 mA 15 mA 111 mA 12 mA 83 mA 9 mA 67 mA 7 mA Efficiency 69% 70% 71% 72% 69% 71% 72% 72% 70% 72% 73% 73% Package Style SIP SIP SIP SIP SIP SIP SIP SIP SIP SIP SIP SIP Note: 1. All specifications measured at TA=25°C, humidity <75%, nominal input voltage and rated output load unless otherwise specified. Output Specifications Item Output power Line Regulation Load Regulation Output voltage accuracy Temperature drift Output ripple Switching frequency Test conditions For Vin change of 1% 10% to 100% full load 100% full load @ 100% load 20 Hz to 300 KHz Bandwidth Full load, nominal input V-Infinity, LLC, 20050 SW 112th Ave., Tualatin, OR 97062 Min. 0.1 Typ. 10 100 www.v-infinity.com Max. 1 0.25 1 ±3 0.03 20 Units W % % % %/°C mVp-p KHz 1-866-372-1258 2/3 VIBLSD1-SIP Series DC-DC Converter Rev. 12-2005 General Specifications Short circuit protection Temperature rise at full load <1 second 25°C Max, 15°C Typ. Cooling Free air convection No-load power consumption 10% nominal power (typical) Operating temperature range -40°C to +85°C Storage temperature range -55°C to +125°C Soldering temperature <= 300°C (1.5mm from case for 10 sec.) Storage humidity range <95% Case material Plastic (UL94-V0) MTBF >3,500,000 hrs. Burn-in At +85°C, for 4 hours at no-load and 4 hours at full load. Isolation Specifications Item Isolation Voltage Insulation Resistance Test Conditions Tested for 1 min. Test at 500 Vdc Min. 1000 1000 Typ. Max. Units Vdc M Ω Typical Characteristics Output Power (%) Temperature Derating Graph Safe Operating Area 71 85 Ambient Temperature ( ) Outline Dimensions & Recommended Layout Pattern Side View Layout 2.54 19.60 2.54 1 2 4 1.00 +0.15/-0 6 10.20 4.10 Bottom View Pin Function 1.25 1 2.00 Notes: 2 4 6 6.00 1 2 4 6 +Vin -Vin -Vout +Vout 12.70 1. All units in mm. 2. All pins on a 2.54 mm pitch. 3. All Pin widths are 0.50 mm. V-Infinity, LLC, 20050 SW 112th Ave., Tualatin, OR 97062 www.v-infinity.com 1-866-372-1258 3/3 VIBLSD1-SIP Series DC-DC Converter Rev. 12-2005 - Minimum loading Application Notes: The converter needs a minimum of 10% loading to maintain output regulation. Operation under no-load - Input filtering To reduce the reflected ripple current and minimize conditions will not cause immediate damages but EMI, especially when the converter input is more may reduce reliability, and cause performance not to than 2” away from the DC source, it is recommended meet specifications. to connect a low ESR electrolytic capacitor between Vin and Gnd. The values suggested are as shown in - Protection Table 1. If additional filtering is required, the The converter has minimal protection against input capacitance may be increased, or expanded to an LC over-voltage or output over-load, and may be network as shown in Figure 1. permanently damaged if exposed to these conditions. An input clamping device can be used for input Table 1 voltage limiting. An input fuse or an output fuse can also be used to protect against over-loading. Input Voltage External Input Capacitance - Unregulated input 5V 4.7 µF As fixed input converters, this series can accept 12 V 2.2 µF voltages within a limited range of the nominal input. 24 V 1.0 µF Otherwise the converter may not function properly or may be damaged. An optional regulator can be used at the input to bring voltage within regulation, as shown in Figure 2. - Output filtering An output capacitor as shown in Table 2 may be used to reduce output ripples and noise. requirements as shown in Table 2. +Vin DC DC Output capacitance may be increased for additional filtering, but should not exeed 10µF. It can also be expanded to an LC network as in Figure 1. +Vout REG -Vin -Vout <Figure 2> Table 2 Vout External Ouput Capacitance 5V 10 µF 9V 4.7 µF 12 V 2.2 µF 15 V 1 µF L L +Vout +Vin C DC DC -Vin C -Vout <Figure 1> V-Infinity, LLC, 20050 SW 112th Ave., Tualatin, OR 97062 www.v-infinity.com 1-866-372-1258