DAESAN P4KE6.8

POWER 400Watts
VOLTAGE 6.8 to 440 Volts
P4KE6.8 THRU P4KE440CA
Features
· Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
· Glass passivated junction
· 400W peak pulse power capability with a 10/100μS
waveform, reptition rate(duty cycle) : 0.01%
· Excellent clamping capability
· Low incremental surge resistance
· Fast response time : typically less than 1.0ps from 1 Volts to
V(BR) for uni-directional and 5.0ns for Bi-directional types
· Devices with V(BR) > 10V, ID are typically less than 1.0μA
· High temperature soldering guaranteed : 265℃/10seconds,
0.375"(9.5mm) lead length, 5lbs. (2.3kg) tension
DO-41
0.107(2.7)
0.080(2.0)
DIA.
1.0(25.4)
MIN.
0.205(5.2)
0.166(4.2)
Mechanical Data
· Case : DO-41 molded plastic body over passivated junction
· Terminals : Solder plated axial leads, solderable per
MIL-STD-750, method 2026
· Polarity : For uni-directional types the color band denotes
cathode end. which is positive with respect to the
anode under normal TVS operation
· Mounting Position : Any
· Weight : 0.012 ounce, 0.34 gram
1.0(25.4)
MIN.
0.034(0.9)
0.028(0.7)
DIA.
Dimensions in inches and (millimeters)
Devices For Bidirectional Applications
· For bi-directional use C or CA suffix for types P4KE7.5 thru types P4KE440CA(e.g. P4KE10C, P4KE220CA),
electrical characteristics apply in both directions.
Maximum Ratings And Electrical Characteristics
(Ratings at 25℃ ambient temperature unless otherwise specified)
Symbols
Values
Units
Peak power dissipation with a 10/100μS waveform (Note 1. Fig. 3)
PPPM
Min.400
Watts
Peak pulse current with a 10/100μS waveform (Note 1)
IPPM
See Table 1
Amps
PM(AV)
1.0
Watts
IFSM
40.0
Amps
VF
3.5/50
Volts
TJ,TSTG
-55 to +175
℃
Steady state power dissipation at TL=75℃ lead length 0.375"(9.5mm) (Note2)
Peak forward surge current, 8.3mm single half sine-wave superimposed on
rated load(JEDEC method) (Note 3)
Maximum instantaneous forward voltage at 25A for unidirectional only(Note4)
Operating junction and storage temperature range
Notes:
(1) Non repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig.2
(2) Mounted on copper pads area of 1.6×1.6"(40×40mm) per Fig.5
(3) Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulse per minute maximum
(4) VF=3.5 Volts max. for devices of V(BR)≤220V, and VF=5.0 Volts max. for devices of V(BR)>220V
ELECTRICAL CHARACTERISTIC at (TA=25℃ unless other specified)
Breakdown Voltage
V(BR) (Volts) (Note 1)
Stand-off
Voltage VWM
(Volts)
Max. Reverse
Leakage
at VWM
ID(Note2)
(μA)
Max. Peak
Pulse Current
IPPM(Note 2)
(Amps)
Max.
Clamping
Voltage at
IPPM
VC(VOLTS)
Max. Temp
Coefficient
of V(BR)
(%/℃)
Max.
Min.
Test Current
at IT
(mA)
P4KE6.8
6.12
7.48
10
5.50
1000
37.0
10.8
0.057
P4KE6.8A
6.45
7.14
10
5.80
1000
38.1
10.5
0.057
P4KE7.5
6.75
8.25
10
6.05
500
34.2
11.7
0.061
P4KE7.5A
P4KE8.2
7.13
7.38
7.88
9.02
10
10
6.40
6.63
500
200
35.4
32.0
11.3
12.5
0.061
0.065
P4KE8.2A
7.79
8.61
10
7.02
200
33.1
12.1
0.060
P4KE9.1
8.19
10.0
1.0
7.37
50
29.0
13.8
0.068
P4KE9.1A
8.65
9.55
1.0
7.78
50
29.9
13.4
0.068
P4KE10
9.00
11.0
1.0
8.10
10
26.7
15.0
0.073
P4KE10A
9.50
10.5
1.0
8.55
10
27.6
14.5
0.073
P4KE11
9.90
12.1
1.0
8.92
5.0
24.7
16.2
0.075
P4KE11A
P4KE12
10.5
10.8
11.6
13.2
1.0
1.0
9.40
9.72
5.0
5.0
25.6
23.1
15.6
17.3
0.075
0.076
P4KE12A
11.4
12.6
1.0
10.2
5.0
24.0
16.7
0.078
P4KE13
11.7
14.3
1.0
10.5
5.0
21.1
19.0
0.081
P4KE13A
12.4
13.7
1.0
11.1
5.0
22.0
18.2
0.081
P4KE15
13.5
16.5
1.0
12.1
5.0
18.2
22.0
0.084
P4KE15A
14.3
15.8
1.0
12.8
5.0
18.9
21.2
0.084
P4KE16
14.4
17.6
1.0
12.9
5.0
17.0
23.5
0.086
P4KE16A
P4KE18
15.2
16.2
16.8
19.8
1.0
1.0
13.6
14.5
5.0
5.0
17.8
15.1
22.5
26.5
0.086
0.088
P4KE18A
17.1
18.9
1.0
15.3
5.0
15.9
25.2
0.088
P4KE20
18.0
22.0
1.0
16.2
5.0
13.7
29.1
0.090
P4KE20A
19.0
21.0
1.0
17.1
5.0
14.4
27.7
0.090
P4KE22
19.8
24.2
1.0
17.8
5.0
12.5
31.9
0.092
P4KE22A
20.9
23.1
1.0
18.8
5.0
13.1
30.6
0.092
P4KE24
21.6
26.4
1.0
19.4
5.0
11.5
34.7
0.094
P4KE24A
P4KE27
22.8
24.3
25.2
29.7
1.0
1.0
20.5
21.8
5.0
5.0
12.0
10.2
33.2
39.1
0.094
0.096
P4KE27A
25.7
28.4
1.0
23.1
5.0
10.7
37.5
0.096
P4KE30
27.0
33.0
1.0
24.3
5.0
9.2
43.5
0.097
P4KE30A
28.5
31.5
1.0
25.6
5.0
9.7
41.4
0.097
P4KE33
29.7
36.3
1.0
26.8
5.0
8.4
47.7
0.098
P4KE33A
31.4
34.7
1.0
28.2
5.0
8.8
45.7
0.098
P4KE36
32.4
39.6
1.0
29.1
5.0
7.7
52.0
0.099
P4KE36A
34.2
37.8
1.0
30.8
5.0
8.0
49.9
0.099
P4KE39
35.1
42.9
1.0
31.6
5.0
7.1
56.4
0.100
P4KE39A
37.1
41.0
1.0
33.3
5.0
7.4
53.9
0.100
P4KE43
38.7
47.3
1.0
34.8
5.0
6.5
61.9
0.101
P4KE43A
40.9
45.2
1.0
36.8
5.0
6.7
59.3
0.101
P4KE47
42.3
51.7
1.0
38.1
5.0
5.9
67.8
0.101
P4KE47A
44.7
49.4
1.0
40.2
5.0
6.2
64.8
0.101
P4KE51
45.9
56.1
1.0
41.3
5.0
5.4
73.5
0.102
P4KE51A
48.5
53.6
1.0
43.6
5.0
5.7
70.1
0.102
P4KE56
P4KE56A
50.4
53.2
61.6
58.8
1.0
1.0
45.4
47.8
5.0
5.0
5.0
5.2
80.5
77.0
0.103
0.103
Device
Type
ELECTRICAL CHARACTERISTIC at (TA=25℃ unless other specified)
Breakdown Voltage
VF(BR) (Volts) (Note 1)
Stand-off
Voltage VWM
(Volts)
Max. Reverse
Leakage
at VWM
ID(Note2)
(μA)
Max. Peak
Pulse Current
IPPM(Note 2)
(Amps)
Max.
Clamping
Voltage at
IPPM
VC(VOLTS)
Max. Temp
Coefficient
of V(BR)
(%/℃)
Max.
Min.
Test Current
at IT
(mA)
P4KE62
55.8
68.2
1.0
50.2
5.0
4.5
89.0
0.104
P4KE62A
58.9
65.1
1.0
53.0
5.0
4.7
85.0
0.104
P4KE68
61.2
74.8
1.0
55.1
5.0
4.1
98.0
0.104
P4KE68A
P4KE75
64.6
67.5
71.4
82.5
1.0
1.0
58.1
60.7
5.0
5.0
4.3
3.7
92.0
108
0.104
0.105
P4KE75A
71.3
78.8
1.0
64.1
5.0
3.9
103
0.105
P4KE82
73.8
90.2
1.0
66.4
5.0
3.4
118
0.105
P4KE82A
77.9
86.1
1.0
70.1
5.0
3.5
113
0.105
P4KE91
81.9
100
1.0
73.7
5.0
3.1
131
0.106
P4KE91A
86.5
95.5
1.0
77.8
5.0
3.2
125
0.106
P4KE100
90.0
110
1.0
81.0
5.0
2.8
144
0.106
P4KE100A
P4KE110
95.0
99.0
105
121
1.0
1.0
85.5
89.2
5.0
5.0
2.9
2.5
137
158
0.106
0.107
P4KE110A
105
116
1.0
94.0
5.0
2.6
152
0.107
P4KE120
108
132
1.0
97.2
5.0
2.3
173
0.107
P4KE120A
114
126
1.0
102
5.0
2.4
165
0.107
P4KE130
117
143
1.0
105
5.0
2.1
187
0.107
P4KE130A
124
137
1.0
111
5.0
2.2
179
0.107
P4KE150
135
165
1.0
121
5.0
1.9
215
0.108
P4KE150A
P4KE160
143
144
158
176
1.0
1.0
128
130
5.0
5.0
1.9
1.7
207
230
0.108
0.108
P4KE160A
152
168
1.0
136
5.0
1.8
219
0.108
P4KE170
153
187
1.0
138
5.0
1.6
244
0.108
P4KE170A
162
179
1.0
145
5.0
1.7
234
0.108
P4KE180
162
198
1.0
146
5.0
1.6
258
0.108
P4KE180A
171
189
1.0
154
5.0
1.6
246
0.108
P4KE200
180
220
1.0
162
5.0
1.4
287
0.108
P4KE200A
P4KE220
190
198
210
242
1.0
1.0
171
175
5.0
5.0
1.5
1.2
274
344
0.108
0.108
P4KE220A
209
231
1.0
185
5.0
1.2
328
0.108
P4KE250
225
275
1.0
202
5.0
1.1
360
0.110
P4KE250A
237
263
1.0
214
5.0
1.2
344
0.110
P4KE300
270
330
1.0
243
5.0
0.93
430
0.110
P4KE300A
285
315
1.0
256
5.0
1.0
414
0.110
P4KE350
315
385
1.0
284
5.0
0.79
504
0.110
P4KE350A
333
368
1.0
300
5.0
0.83
482
0.110
P4KE400
360
440
1.0
324
5.0
0.70
574
0.110
P4KE400A
380
420
1.0
342
5.0
0.73
548
0.110
P4KE440
396
484
1.0
356
5.0
0.63
631
0.110
P4KE440A
418
462
1.0
376
5.0
0.66
602
0.110
Device
Type
Notes:
(1) V(BR) measured after IT applied for 300μS, IT=square wave pulse or equivalent.
(2) Surge current waveform per Fig.3 and derated per Fig.2
(3) For bidirctional types having VWM of 10 Volts and less. The ID limit is doubled.
(4) All terms and symbols are consistent with ANSI/IEEE C62.35
RATINGS AND CHARACTERISTIC CURVES P4KE6.8 THRU P4KE440CA
FIG.1-PEAK PULSE POWER RATING CURVE
FIG.2-PULSE DERATING CURVE
100
PEAK PULSE POWER(PPP) OR CURRENT
(IPPM) DERATING IN PERCENTAGE,%
PPPM, PEAK PULSE POWER, KW
100
NON-REPETITIVE
PULSE WAVEFORM
SHOWN IN FIG.3
TA =25℃
10
1.0
0.1
0.1mS
1.0mS
10mS
1.0mS
100mS
75
50
25
0
10mS
0
25
td, PULSE WIDTH, sec.
50
75
100
150
175
200
TA, AMBIENT TEMPERATURE (℃)
FIG.4-TYPICAL JUNCTION CAPACITANCE
UNIDIRECTIONAL
FIG.3-PULSE WAVEFORM
100,000
150
tr=10msec.
100
TJ =25℃
f=1.0MHz
Vsig=50mVp-p
PULSE WIDTH (td) is DEFINED
as the POINT WHERE the PEAK
CURRENT DECAYS to 50% of IPPM
PEAK VALUE
IPPM
CJ,JUNCTION CAPACITANCE,pF
PPPM, PEAK PULSE current, %
125
HALF VALUE-IPPM
2
50
10/100msec.WAVEFORM
as DEFINED by R.E.A.
td
0
0
1.0
2.0
3.0
10,000
MEASURED at
ZERO BIAS
1000
MEASURED at
STAND-OFF
VOLTAGE, VWM
4.0
t, TIME, ms
10
1.0
10
100
200
V(BR), BREAKDOWN VOLTAGE, VOLTS
FIG.5-STEADY STATE POWER DERATING CURVE
L=0.375"(9.5mm)
LEAD LENGTHS
IFSM, PEAK FORWARD SURGE CURRENT,
AMPERES
PM(AV), STEADY STATE POWER
DISSIPATION, WATTS
1.00
60Hz
RESISTIVE OR INDUCTIVE LOAD
0.75
0.50
1.6X1.6X0.040"
(40X40X1mm)
COPPER HEAT SINKS
0.25
0
0
25
50
75
100
125
TL, LEAD TEMPERATURE (℃)
150
175
FIG.6-MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT UNIDIRECTIONAL ONLY
200
50
TJ=TJ max.
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
40
30
20
10
0
1
10
NUMBER OF CYCLES AT 60HZ
200
RATINGS AND CHARACTERISTIC CURVES P4KE6.8 THRU P4KE440CA
FIG7-TYPICAL REVERSE LEAKAGE CHARACTERISTICS
ID, INSTANTANEOUS REVERSE LEAKAGE
CURRENT, MICROAMPERES
100
MEASURED AT DEVICES
STAND-OFF VOLTAGE,
VWM
10
1
TA=25℃
0.1
0.01
0
100
200
300
V(BR), BREAKDOWN VOLTAGE, VOLTS
400 440
500