F E AT U R E S MODEL NO. 100D0712 DC - 400 MHz 0.25 dB or 1 dB LSB Up to 63 dB Range SMA Connectors 7 BIT Attenuator 7 Section J2 J1 PART IDENTIFICATION .25 1.250 J1 • • • • • • • • • • • • • • • • • • • J2 COM B 2 dB 16 dB -1 2 dB 0.5 dB • • 1.75 ±.03 8 dB 16 dB 4 dB 8 dB .25 dB 4 dB .144 DIA THRU (4 PLACES) 16 dB 1 dB 16 dB 1 dB • .375 5.00 .18 5.375 BASIC 2 dB 5.75 ±.03 -1 2 dB 16 dB (1/2 32 dB) 0.5 dB •• • • 8 dB COM 16 dB 4 dB 8 dB COM .25 dB 4 dB • 16 dB (1/2 32 dB) 16 dB 1 dB 1 dB ATTENUATION TABLE CONNECTOR SMA FEMALE (2 PLACES) .875 ±.03 SOLDER TERMINAL 2 TYPES (8 PLACES) .xx = .02 .xxx = .010 .09 GUARANTEED PERFORM ANCE Parameter Min Typ Max Units Operating Frequency DC Current Per Section Insertion Loss Attenuation DC 400 17 1.5 3.5 LSB Range Accuracy VSWR Impedance Switching Speed RF Power Conditions At +24 VDC Supply DC - 100 MHz 100 - 400 MHz See Attenuation Table See Attenuation Table ± (0.15 dB +2% of Atten. Setting in dB) for Values ≥ 1 dB ± (0.05 dB +2% of Atten. Setting in dB) for Values < 1 dB 1.25/1 50 5 Operate No Damage Operating Temperature DA I C O In d u s t r i e s MHz mA dB dB dB dB dB -55 +25 +20 +27 +85 OHMS mSec 50% TTL to 90% / 10% RF dBm 0.1 dB Compression dBm °C TA Rev. E / Iss. 1