F E AT U R E S MODEL NO. CDP08 1 5 1300 - 1900 MHz 22.5° LSB, 337.5° Range Integrated Coupler for REF Channel +45 dBm 3rd Order Intercept ECL Driver Replaceable SMA Connector HDI PHASE SHIFTER, 4 SECTION .110 SPACER PLATE J1 (INPUT) J3 (OUTPUT) .43 MAX SOLDER TERM. (.020 DIA. TYP) J1 COUPLER PHASE SHIFTER 4 SECTION C1 C2 C1 C2 C1 C2 C1 C2 GND +5V -5.2V 2.20 BIT 0 BIT 3 BIT 1 BIT 2 J2 180° 22.5° J2 (OUTPUT) 90° 45° 1.400 J3 PART IDENTIFICATION GND +5V -5.2V SMA FEMALE 3 PLACES C1 C2 BIT 0 C1 C2 BIT 3 C1 C2 BIT 1 C1 C2 BIT 2 INPUT TERM. NETWORK, TYPICAL 4 PLACES LOGIC TABLE Control Logic C0 C1 C2 0 0 0 0 0 0 0 0 1 0 0 1 0 1 0 0 1 0 0 1 1 0 1 1 1 0 0 1 0 0 1 0 1 1 0 1 1 1 0 1 1 0 1 1 1 1 1 1 C3 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 Phase State PS0 PS1 PS2 PS3 PS4 PS5 PS6 PS7 PS8 PS9 PS10 PS11 PS12 PS13 PS14 PS15 Normal Phase Shift (DEG) 0 22.5 45 67.5 90 112.5 135 157.5 180 202.5 225 247.5 270 292.5 315 337.5 LOGIC 1 C1 = -0.6V to -1.0V C2 = -1.4V to -1.9V GUARANTEED PERFORM A NCE LOGIC 0 C1 = -1.4V to -1.9V C2 = -0.6V to -1.0V Parameter Min Typ Max Units Operating Frequency DC Current 1300 80 20 ECL Control Type Control Current High Low 7.65 -7.65 VSWR I.L. (dB) Insertion Loss J1 - J2 or J1 - J3 2.0 10 Balance Between T Y P I CA L P E R F OR MA NC E at 25 °C J1 and J3 Isolation Phase Shift 20 LSB Range 1.8 8.5 -8.5 5.5 0.2 0.7 25 22.5 0 MHz mA mA 9.35 -9.35 6.5 0.5 1.0 mA mA dB dB dB dB DEG DEG 337.5 8 Accuracy 1.6 1900 115 30 6 VSWR I. LOSS 1.2/1 1.2/1 50 210 20 140 +45 +20 +25 Input Output 1.4 4 1.2 2 1.0 0 Impedance Switching Speed Transition (Rise/Fall) Time Switching (Video) Transients Intercept Points 3rd RF Power Operate VSWR No Damage 1.0 1.5 2.0 Operating Temperature -55 +25 ±5 ±10 1.6/1 1.6/1 350 +18 +23 +27 +71 DEG DEG OHMS nSEC nSEC mV dBm dBm dBm dBm °C Conditions At +5 VDC Supply At -5.2 VCD Supply 4 Line Differential See Logic Table C1 = -0.8 V, C2 = -1.65 V C1 = -1.65 V, C2 = -0.8 V At 25°C At Temperature Extremes Between Ports J2 - J3 or J3 - J2 J2 with respect to J3 Minus PS0 at F0 22.5, 45, 90, 180 DEG at F0 For 180 Phase Change Any Phase State 50% ECL to 90% / 10% RF 90% / 10% or 10% / 90% RF Peak Value 0.1 dB Compression 1.0 dB Compression TA FREQUENCY (GHz) DA I C O In d u s t r i e s Rev. - / Iss. 1