DVCH2800D Series HIGH RELIABILITY HYBRID DC-DC CONVERTERS DESCRIPTION FEATURES The DVCH series of high reliability DC-DC converters is operable over the full military (-55 °C to +125 °C) temperature range with no power derating. Unique to the DVCH series is a magnetic feedback circuit that is radiation immune. Operating at a nominal fixed frequency of 400 kHz, these regulated, isolated units utilize well controlled undervoltage lockout circuitry to eliminate slow start-up problems. • • • These converters are designed and manufactured in a facility qualified to ISO9001 and certified to MILPRF-38534 and MIL-STD-883. This product may incorporate one or more of the following U.S. patents: 5,784,266 5,790,389 5,963,438 5,999,433 6,005,780 6,084,792 6,118,673 • • • • • • • • • • • • • • High Reliability Very Low Output Noise Wide Input Voltage Range: 12 to 50 Volts per MIL-STD-704 Up to 1.5 Watts Output Power Radiation Immune Magnetic Feedback Circuit NO Use of Optoisolators Undervoltage Lockout Indefinite Short Circuit Protection Current Limit Protection Industry Standard Pinout High Input Transient Voltage: 80 Volts for 1 sec per MIL-STD-704A Precision Projection Welded Hermetic Package High Power Density: > 7 W/in3 Custom Versions Available Additional Environmental Screening Available Meets MIL-STD-461C and MIL-STD-461D EMC Requirements When Used With a DVMSA28 EMI Filter MIL-PRF-38534 Element Evaluated Components Figure 1 – DVCH2800D DC-DC Converter (Not To Scale) 1X052DSB 11314 4th Avenue West, Suite 206 Everett, WA 98204 http://www.vpt-inc.com Sales Information: Phone: (425) 353-3010 Fax: (425) 353-4030 E-mail: [email protected] 1 DVCH2800D Series SPECIFICATIONS (TCASE = -55°C to +125°C, VIN = +28V ± 5%, Full Load, Unless Otherwise Specified) ABSOLUTE MAXIMUM RATINGS Input Voltage (Continuous) Input Voltage (Transient, 1 second) Output Power1 Power Dissipation (Full Load, TCASE = +125°C) Parameter 50 VDC 80 Volts 1.5 Watts 0.6 Watts Junction Temperature Rise to Case Storage Temperature Lead Solder Temperature (10 seconds) Weight (Maximum) DVCH2805D Conditions Min Typ +5°C -65°C to +150°C 270°C 11 Grams DVCH2812D Units Max Min Typ Max STATIC Continuous INPUT 4 Voltage Current Ripple Current Inhibit Pin Input 12 28 50 12 28 50 V Transient, 1 sec - - 80 - - 80 V Inhibited - - 3.5 - - 3.5 mA No Load - - 10 - - 12 mA Full Load, 20Hz to 10MHz - - 30 - - 30 mAp-p 4 Inhibit Pin Open Circuit Voltage 4 UVLO Turn On OUTPUT Voltage Current 3 - 1.5 0 - 1.5 V 9.0 11.0 8.0 9.0 11.0 V 6.5 - 11.5 6.5 - 11.5 V ±VOUT TCASE = 25°C 4.95 5.00 5.05 11.88 12.0 12.12 V ±VOUT TCASE = -55°C to +125°C 4.80 5.00 5.20 11.52 12.0 12.48 V Total 3 Power 0 8.0 0 - 1.5 0 - 1.5 W ±VOUT Either Output 0 - 1.2 0 - 1.2 W IOUT Either Output 0 - 0.24 0 - .1 A Ripple Voltage ±VOUT Full Load, 20Hz to 10MHz - - 50 - - 100 mVp-p Line Regulation ±VOUT VIN = 12V to 50V - - 150 - - 150 mV Load Regulation ±VOUT 10% Load to Full Load - - 400 - - 700 mV Load Regulation ±VOUT 50% Load to Full Load - - 250 - - 250 mV 72 79 - 74 79 - % EFFICIENCY LOAD FAULT POWER DISSIPATION Overload 4 Short Circuit 4 CAPACITIVE LOAD SWITCHING FREQUENCY ISOLATION 500 VDC MTBF (MIL-HDBK-217F) AIF @ TC = 55°C - - 3 - - 3 W - - 4 - - 4.5 W - - 500 - - 200 µF kHz 325 400 475 325 400 475 100 - - 100 - - MΩ - 841 - - 841 - kHrs - 100 300 - 100 300 mVPK DYNAMIC Load Step Output Transient ±VOUT 2 Load Step Recovery Line Step Output Transient 4 ±VOUT 2, 4 Line Step Recovery Turn On Delay Turn On Overshoot Notes: ±VOUT Half Load to Full Load VIN = 12V to 50V VIN = 0V to 28V 1. Dependant on output voltage. 3. Derate linearly to 0 at 135°C. 1X052DSB - 200 500 - 100 400 µSec - 200 400 - 300 600 mVPK - 400 600 - 300 600 µSec - 15 20 - 15 20 mSec - 0 25 - 0 50 mVPK 2. Time for output voltage to settle within 1% of its nominal value. 4. Verified by qualification testing. 2 DVCH2800D Series SPECIFICATIONS (TCASE = -55°C to +125°C, VIN = +28V ± 5%, Full Load, Unless Otherwise Specified) ABSOLUTE MAXIMUM RATINGS Input Voltage (Continuous) Input Voltage (Transient, 1 second) Output Power1 Power Dissipation (Full Load, TCASE = +125°C) Parameter 50 VDC 80 Volts 1.5 Watts 0.6 Watts Junction Temperature Rise to Case Storage Temperature Lead Solder Temperature (10 seconds) Weight (Maximum) DVCH2815D Conditions +5°C -65°C to +150°C 270°C 11 Grams Units Min Typ Max STATIC Continuous INPUT 4 Voltage Current Ripple Current Inhibit Pin Input 12 28 50 V Transient, 1 sec - - 80 V Inhibited - - 3.5 mA No Load - - 14 mA Full Load, 20Hz to 10MHz - - 30 mAp-p 4 Inhibit Pin Open Circuit Voltage 4 UVLO Turn On OUTPUT Voltage Current 3 - 1.5 V 9.0 11.0 V 6.5 - 11.5 V ±VOUT TCASE = 25°C 14.85 15.0 15.15 V ±VOUT TCASE = -55°C to +125°C 14.40 15.0 15.60 V Total 3 Power 0 8.0 0 - 1.5 W ±VOUT Either Output 0 - 1.2 W IOUT Either Output 0 - 0.08 A Ripple Voltage ±VOUT Full Load, 20Hz to 10MHz - - 100 mVp-p Line Regulation ±VOUT VIN = 12V to 50V - - 150 mV Load Regulation ±VOUT 10% Load to Full Load - - 700 mV Load Regulation ±VOUT 50% Load to Full Load - - 250 mV 74 79 - % W EFFICIENCY LOAD FAULT POWER DISSIPATION Overload 4 Short Circuit 4 CAPACITIVE LOAD SWITCHING FREQUENCY ISOLATION 500 VDC MTBF (MIL-HDBK-217F) AIF @ TC = 55°C - - 3 - - 4.5 W - - 200 µF kHz 325 400 475 100 - - MΩ - 841 - kHrs - 100 300 mVPK DYNAMIC Load Step Output Transient ±VOUT 2 Load Step Recovery Line Step Output Transient 4 ±VOUT 2, 4 Line Step Recovery Turn On Delay Turn On Overshoot Notes: ±VOUT Half Load to Full Load VIN = 12V to 50V VIN = 0V to 28V 1. Dependant on output voltage. 3. Derate linearly to 0 at 135°C. 1X052DSB - 100 400 µSec - 300 600 mVPK - 300 600 µSec - 15 20 mSec - 0 50 mVPK 2. Time for output voltage to settle within 1% of its nominal value. 4. Verified by qualification testing. 3 DVCH2800D Series BLOCK DIAGRAM PIN 1 PIN 3 D1 T1 +V OUT 28V IN L1 C2 C1 OUT COM IN COM PIN 4 C3 PIN 2 Q1 -VOUT D2 UNDER VOLTAGE SHUTDOWN PWM CONTROL PRIMARY HOUSEKEEPING SUPPLY VOLTAGE AMPLIFIER PIN 6 Rs1 INH PIN 7 Figure 2 CONNECTION DIAGRAM 1 3 28V IN 28 Vdc + - +V OUT LO AD 7 4 INH OUT COM LO AD 2 6 IN COM -V OUT Figure 3 1X052DSB 4 DVCH2800D Series INHIBIT DRIVE CONNECTION DIAGRAMS 28V IN 28V IN 1 1 12K INH 7 OPTIONAL CAPACITOR IN COM 12K OPTOISOLATOR BIAS INH 7 BIAS OPTIONAL CAPACITOR 12V 2 IN COM 12V 2 Figure 4 – Internal Inhibit Circuit and Recommended Drive Figure 5 – Isolated Inhibit Drive (Shown with optional capacitor for turn-on delay) (Shown with optional capacitor for turn-on delay) EMI FILTER HOOKUP DIAGRAM DVMSA28 EMI FILTER 1 DVCH2800D DC-DC CONVERTER 2,3 28V IN 1 28V OUT 3 28V IN +V OUT LOAD 28 Vdc 7 + - 4 INH OUT COM LOAD 7 5,6 IN COM 2 OUT COM 4,8 6 IN COM CASE -V OUT 5 Figure 6 – Converter with EMI Filter 1X052DSB 5 DVCH2800D Series EFFICIENCY PERFORMANCE CURVES (TCASE = 25°C, Full Load, Unless Otherwise Specified) VIN = 28V VIN = 40V 90 80 80 70 70 Output Pow er (W) 1.5 1.3 1.1 0.1 1.5 1.3 1.1 0.9 30 0.7 30 0.5 40 0.3 40 0.9 50 0.7 50 60 0.5 60 0.3 Efficiency (%) 90 0.1 Efficiency (%) VIN = 16V Output Pow er (W) Figure 7 – DVCH2805D Figure 8 – DVCH2812D Efficiency (%) vs. Output Power (W) Efficiency (%) vs. Output Power (W) 90 Efficiency (%) 80 70 60 50 40 1.5 1.3 1.1 0.9 0.7 0.5 0.3 0.1 30 Output Pow er (W) Figure 9 – DVCH2815D Efficiency (%) vs. Output Power (W) 1X052DSB 6 DVCH2800D Series EMI PERFORMANCE CURVES (TCASE = 25°C, VIN = +28V ± 5%, Full Load, Unless Otherwise Specified) Figure 10 – DVCH2800D without EMI Filter Figure 11 – DVCH2800D with EMI Filter 1X052DSB 7 DVCH2800D Series PACKAGE SPECIFICATIONS TOP VIEW SIDE VIEW PIN FUNCTION 1 28V IN 2 IN COM 3 +V OUT 4 OUT COM 5 CASE 6 -V OUT 7 INHIBIT BOTTOM VIEW Figure 12 – Package and Pinout (Dimensional Limits are ±0.005” Unless Otherwise Stated) 1X052DSB 8 DVCH2800D Series PACKAGE PIN DESCRIPTION Pin Function Description 1 28V IN Positive Input Voltage Connection 2 IN COM Input Common Connection 3 +V OUT Positive Output Voltage Connection 4 OUT COM Output Common Connection 5 CASE Case Connection 6 -V OUT Negative Output Voltage Connection 7 INHIBIT Logic Low = Disabled Output. Connecting the inhibit pin to input common causes converter shutdown. Logic High = Enabled Output. Unconnected or open collector TTL. 1X052DSB 9 DVCH2800D Series ENVIRONMENTAL SCREENING (100% Tested Per MIL-STD-883 as referenced to MIL-PRF-38534) Screening MIL-STD-883 (No Suffix) Extended /ES HB /HB Class H /H Class K /K • • • • • • • • • • • • • • Standard NonDestructive Bond Pull Method 2023 • Internal Visual Method 2017, 2032 Internal Procedure • Temperature Cycling Method 1010, Condition C Method 1010, -55°C to 125°C • Constant Acceleration Method 2001, 3000g, Y1 Direction Method 2001, 500g, Y1 Direction • PIND Method 2020, Condition A2 • Pre Burn-In Electrical 100% at 25°C • Burn-In Method 1015, 320 hours at +125°C Method 1015, 160 hours at +125°C 96 hours at +125°C 24 hours at +125°C • Final Electrical MIL-PRF-38534, Group A1 100% at 25°C • Hermeticity Method 1014, Fine Leak, Condition A Method 1014, Gross Leak, Condition C -3 Dip (1 x 10 ) Radiography Method 20123 External Visual Method 2009 Notes: 1X052DSB 1. 2. 3. • • • • • • • • • • • • • • • • • • • • • • • 100% R&R testing at –55°C, +25°C, and +125°C with all test data included in product shipment. PIND test Certificate of Compliance included in product shipment. Radiographic test Certificate of Compliance and film(s) included in product shipment. 10 DVCH2800D Series ORDERING INFORMATION DVCH 28 05 D /HB 1 2 3 4 5 - XXX 6 (1) (2) (3) (4) Product Series Nominal Input Voltage Output Voltage Number of Outputs DVCH 1. 2. 5 Volts 12 Volts 15 Volts 05 12 15 (5) (6) Screening Code1,2 Additional Screening Code None /ES /HB /H /K Notes: 28 Volts 28 Standard Extended HB Class H Class K D Dual Contact Sales Contact the VPT Inc. Sales Department for availability of Class H (/H) or Class K (/K) qualified products. VPT Inc. reserves the right to ship higher screened or SMD products to meet lower screened orders at our sole discretion unless specifically forbidden by customer contract. Please contact your sales representative or the VPT Inc. Sales Department for more information concerning additional environmental screening and testing, different input voltage, output voltage, power requirement, source inspection, and/or special element evaluation for space or other higher quality applications. 1X052DSB 11 DVCH2800D Series SMD (STANDARD MICROCIRCUIT DRAWING) NUMBERS Standard Microcircuit Drawing (SMD) DVCH2800D Series Similar Part Number *T.B.D. DVCH2805D/H *T.B.D. DVCH2812D/H *T.B.D. DVCH2815D/H Do not use the DVCH2800D Series similar part number for SMD product acquisition. It is listed for reference only. For exact specifications for the SMD product, refer to the SMD drawing. SMD’s can be downloaded from the DSCC website at http://www.dscc.dla.mil/programs/smcr/. The SMD number listed above is for MIL-PRF-38534 Class H screening, standard gold plated lead finish, and no RHA (Radiation Hardness Assurance) level. Please reference the SMD for other screening levels, lead finishes, and radiation levels. CONTACT INFORMATION To request a quotation or place orders please contact your sales representative or the VPT Inc. Sales Department at: Phone: Fax: E-mail: (425) 353-3010 (425) 353-4030 [email protected] All information contained in this datasheet is believed to be accurate, however, no responsibility is assumed for possible errors or omissions. The products or specifications contained herein are subject to change without notice. 1X052DSB 12