DOMINANT SMO-CLD-Q2

DOMINANT Semiconductors
PRELIMINARY
UNDER DEVELOPMENT
Engineering reference data are not verified. The specifications are subject to
change without notice.
SMT 0805 AlInGaP MSpice: SMx-CLD
Note: The center pad is a common cathode. Please
take care during soldering to avoid shorting.
•
High brightness diffused surface mount LED.
•
Super wide viewing angle of 160°.
•
Equivalent to 0805 package outline. Copper lead-frame construction.
•
Qualified according to JEDEC moisture sensitivity Level 2.
•
Compatible to IR reflow soldering.
02/06/04
M SpiceLED AlInGaP SMx-CLD-pv4
Page 1 of 8
PRELIMINARY
UNDER DEVELOPMENT
DOMINANT Semiconductors
Engineering reference data are not verified. The specifications are subject to
change without notice.
Part Ordering Number
Chip Technology / Viewing
Color
Angle
SMS-CLD-N2P-1
AlInGaP /
•
•
•
Super Red
SMS-CLD-N2
SMS-CLD-P1
SMS-CLD-P2
SMR-CLD-PQ1-1
•
•
•
SMR-CLD-P1
SMR-CLD-P2
SMR-CLD-Q1
SMO-CLD-P2Q-1
•
•
•
SMO-CLD-P2
SMO-CLD-Q1
SMO-CLD-Q2
SMY-CLD-P2Q-1
•
•
•
SMY-CLD-P2
SMY-CLD-Q1
SMY-CLD-Q2
SMG-CLD-M2N-1
•
•
•
SMG-CLD-M2
SMG-CLD-N1
SMG-CLD-N2
AlInGaP /
Luminous Intensity
@ If = 20mA, Iv ( mcd )
160
35.5 … 45.0
45.0 … 56.0
56.0 … 71.5
160
160
160
56.0 … 112.5
56.0 … 71.5
71.5 … 90.0
90.0 … 112.5
Yellow
AlInGaP /
56.0 … 112.5
56.0 … 71.5
71.5 … 90.0
90.0 … 112.5
Orange
AlInGaP /
45.0 … 90.0
45.0 … 56.0
56.0 … 71.5
71.5 … 90.0
Red
AlInGaP /
35.5 … 71.5
160
Green
22.4 … 45.0
22.4 … 28.5
28.5 … 35.5
35.5 … 45.0
NOTE:
1. All part number above comes in a standard quantity of 3000 units per reel.
2. Other luminous intensity groups are also available upon request.
3. Luminous intensity is measured with an accuracy of ±11%.
4. All optical and electrical data are measured at 25°C.
5.
Wavelength binning is carried for all units as per the wavelength-binning table. Only one
wavelength group is allowed for each reel.
02/06/04
M SpiceLED AlInGaP SMx-CLD-pv4
Page 2 of 8
PRELIMINARY
UNDER DEVELOPMENT
DOMINANT Semiconductors
Engineering reference data are not verified. The specifications are subject to
change without notice.
Electrical Characteristics.
(Ta = 25°C)
Vf @ If= 20 mA
Part Number
Vr @ Ir =10uA
Typ. (V)
Max. (V)
Min.(V)
1.8
2.4
12
All devices
Forward voltages are tested using a current pulse of 1 ms and has an accuracy of ± 0.1V.
Wavelength Grouping.
Color
Group
Wavelength distribution (nm)
SMS, Super Red
Full
625 – 640
SMR; Red
Full
620 – 630
SMO; Orange
Full
600 – 612
W
600 – 603
X
603 – 606
Y
606 - 609
Z
609 - 612
Full
582 – 594
W
582 – 585
X
585 – 588
Y
588 - 591
Z
591 - 594
Full
564.5 – 576.5
W
564.5 – 567.5
X
567.5 – 570.5
Y
570.5 – 573.5
Z
573.5 – 576.5
SMY; Yellow
SMG; Green
Dominant wavelength is measured with an accuracy of ±1 nm.
02/06/04
M SpiceLED AlInGaP SMx-CLD-pv4
Page 3 of 8
PRELIMINARY
UNDER DEVELOPMENT
DOMINANT Semiconductors
Engineering reference data are not verified. The specifications are subject to
change without notice.
Absolute Maximum Ratings
Maximum Value
Unit
DC forward current.
30
mA
Peak pulse current.
(tp ≤ 10 µs, Duty cycle = 0.1)
Reverse voltage.
250
mA
12
V
LED junction temperature.
110
°C
Operating temperature.
-40 … +105
°C
Storage temperature.
-40 … +105
°C
Power dissipation
( at room temperature )
72
mW
Material
Material
Lead-frame.
Cu Alloy With NiPdAu Plating.
Package.
High Temperature Resistant Epoxy Resin.
Note: Product is Pb free.
Recommended Solder Pad
02/06/04
M SpiceLED AlInGaP SMx-CLD-pv4
Page 4 of 8
PRELIMINARY
UNDER DEVELOPMENT
DOMINANT Semiconductors
Engineering reference data are not verified. The specifications are subject to
change without notice.
Forward current vs. forward voltage.
Relative intensity vs. forward current.
Intensity vs. DC Forward Current
Forward Current vs. Forward Voltage
35
2
30
1.8
Forward Current (mA)
Relative intensity. Normalized at 20
mA.
2.2
1.6
1.4
1.2
1
0.8
0.6
0.4
25
20
15
10
5
0.2
0
0
10
20
30
40
50
0
1.2
60
1.4
Forward Current (mA)
Radiation pattern.
30 o
20
1.8
2
Maximum current vs. ambient temperature.
0o
10 o
o
1.6
Forward Voltage (V)
1.0
Max forward Current vs Temperature
35
Forward Current, If
0.8
40 o
0.6
50 o
60
o
70
o
80
o
0.4
30
25
20
15
10
5
0
0.2
10 20 30 40 50 60 70 80 90 100 110
Ambient Temperature
0
90 o
Relative Intensity vs. Wavelength
Relative Spectra Emission
1.0
Relative Intensity
0.9
Orange
0.8
0.7
Red
0.6
0.5
Super Red
Green
0.4
0.3
0.2
0.1
0.0
500
550
600
650
700
750
800
Wavelength (nm)
02/06/04
M SpiceLED AlInGaP SMx-CLD-pv4
Page 5 of 8
DOMINANT Semiconductors
PRELIMINARY
UNDER DEVELOPMENT
Engineering reference data are not verified. The specifications are subject to
change without notice.
Taping And Orientation.
Reels come in quantity of 3000 units.
Reel diameter is 180 mm.
02/06/04
M SpiceLED AlInGaP SMx-CLD-pv4
Page 6 of 8
PRELIMINARY
UNDER DEVELOPMENT
DOMINANT Semiconductors
Engineering reference data are not verified. The specifications are subject to
change without notice.
Recommended IR-reflow Soldering Profile.
Classification Reflow Profile (JEDEC J-STD-020B)
275
235-240oC
10-30s
250
225
Ramp-up
3 oC/sec
max.
o
Temperature ( C)
200
183 oC
175
60-150s
150
125
Ramp-dow n
6 oC/sec
max.
100
Preheat
60-120s
75
50
360s max
25
0
50
100
150
200
Time (sec)
02/06/04
M SpiceLED AlInGaP SMx-CLD-pv4
Page 7 of 8
DOMINANT Semiconductors
PRELIMINARY
UNDER DEVELOPMENT
Engineering reference data are not verified. The specifications are subject to
change without notice.
NOTE.
All the information published is considered to be reliable. However, DOMINANT
Semiconductors does not assume any liability arising out of the application or use of any
product described herein.
DOMINANT Semiconductors reserves the right to make changes at any time without
notice to any products in order to improve reliability, function or design.
DOMINANT Semiconductors products are not authorized for use as critical components
in life support devices or systems without the express written approval from the
managing director of DOMINANT Semiconductors.
02/06/04
M SpiceLED AlInGaP SMx-CLD-pv4
Page 8 of 8