ECM 15mm2 3D Transponder Inductor 3DC1515 Series 125kHz Transponder Application Equal Sensitivity X, Y, and Z Axis Surface Mount Ferrite Core Inductance 900uH to 4.05mH Temp. Range –40 to 85 oC Tape and Reeled The 3DC series of surface mountable 3D antenna inductors is the very first of its type specifically designed for 125kHz transponder applications. The coil dimensions are optimised to achieve maximum sensitivity on each coil axis. COMPONENT OUTLINE DIMENSIONS (mm) A B C D E F G H J 15.0 +/-0.3 15.0 +/-0.3 5.0 +/-0.3 10.0 min. 8.0 9.5 3.0 0.9 2.0 CONNECTION Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 N/C Start L x Start L y Start L z N/C End L x End L y End L z ECM Electronics Limited, Penmaen House, Ashington, West Sussex, RH20 3JR, UK Tel: +44(0)1903 892810: Fax: +44(0)1903 892738. Email: [email protected] Although we have attempted to accurately reflect the products we market. ECM reserve the right without prior notice to discontinue any product or make design changes we believe necessary. Issue 5 ECM 15mm2 3D Transponder Inductor ECM Part 3DC1515T-901 3DC1515T-102 3DC1515T-162 3DC1515T-192 3DC1515T-242 3DC1515T-247 3DC1515T-292 3DC1515T-342 3DC1515T-402 Lx / Ly / Lz (mH) 0.90 @125 kHz 1.08 @125 kHz 1.62 @125 kHz 1.97 @125 kHz 2.38 @125 kHz 2.47 @125kHz 2.89 @125 kHz 3.44 @125 kHz 4.05 @125 kHz Tol % J J J J J J J J J C (pF) 1800 1500 1000 820 680 660 560 470 400 Q Min. (**kHz) 25 25 25 25 25 25 25 25 25 SRF Min. (kHz) 700 600 400 400 350 350 350 300 300 TOLERANCES J=5% ** = Operating and Test Frequency as specified in ‘L’ column C = Capacitor for tuning circuits (125kHz) NB - the parallel input Cap. of the IC must also be taken into account ECM Electronics Limited, Penmaen House, Ashington, West Sussex, RH20 3JR, UK Tel: +44(0)1903 892810: Fax: +44(0)1903 892738. Email: [email protected] Although we have attempted to accurately reflect the products we market. ECM reserve the right without prior notice to discontinue any product or make design changes we believe necessary. Issue 5