XL XLR XLU XMR XMU HIGH VOLTAGE RECOVERY FOR X-RAY AND INDUSTRIAL APPLICATIONS STANDARD AND FAST RECOVERY TYPES EPOXY MOLDED PACKAGE PLATINUM DOPED AVALANCHE CAPABILITY X-RAY BOARD ASSEMBLIES ALSO A VAILABLE. INQUIRE. o ELECTRICAL CHARACTERISTICS (at TA=25 C Unless Otherwise Specified) XLR XL 5 10 5 Peak Reverse Voltage, Test, V R(TEST) 5.5 Average Rectified Forward Current in o 55 C Oil (Fig. 1 ) 200 Max. Peak Surge Current, I FRM 1/2 Cycles @ 60Hz (Non Repetitive), Fig. 2 35 20 18 15 Max. Peak Surge Current, I FRM, 10 Cycles @ 60Hz 11 6 5.5 5 Type Peak Reverse Voltage, Operating, VR(OPER) @ V R(TEST) and 25 oC, Max. DC Reverse Current, I RM , @ V R(TEST) and100 o C, Max. Reverse Recovery Time, TRR lF =50mA, l R =1 00mA, l RR =25mA,(Fig.4) Ambient Operating Temperature Range, TA Storage Temperature Range, TSTG 10 12 20 9 9 11 10 10 12 XMR XMU XMU 5 5 10 18 5 5 9 kV 20 5.5 5.5 10 kV 220 200 100 100 500 300 300 mA 10 100 100 100 AMPS 2.7 25 25 25 AMPS l F=500mA lF =300mA lF =50mA Max. Forward Voltage Drop, VFM @ , l F Max. DC Reverse Current, I RM , XLR XLU XLR 7 12 14 22 28 10 11 21 V 1 1 1 1 1 5 5 5 A 30 25 30 30 30 500 350 350 A 175 NOT RATED 175 75 75 ns 50 175 150 -55 to +125oC -55 to +150oC If operated over 10,000 v/inch in length, devices should be immersed in oil or re-encapsulated. XL XLR XLU XMR XMU FIG.2 FIG.1 NON- REPETITIVE SURGE CURRENT PEAK SURGE CURRENT VS NUMBER OF CYCLES AT 60 Hz O (SINE WA VE INPUT)AND T A=25 C OUTPUT CURRENT vs AMBIENT TEMPERATURE 100 1 9 8 7 6 5 XMR5 400 XMU 300 XL 10 200 XLR 100 XLU12 XLR20 0 0 20 50 40 8 100 120 140 PEAK SURGE CURRENT(NON-REP), IFSM, (AMPS) AVG. FORWARD CURRENT IO (mA) 500 XMU 4 XMR5 3 2 XL 10 1 9 8 7 6 5 10 XLR XLU12 4 3 XLR20 2 1 1 AMBIENT TEMPERATURE, TA(OIL) OC 1 100 10 NUMBER OF CYCLES AT 60 Hz FIG.3 MECHANICAL Max.lead temperature for soldering, 1/8 from body ,10 seconds @260 OC 0.26 MAX. 1.0 MIN. 0.38 MAX. 1.0 MIN. 0.60 _ 0.010 + 0.052/0.048 DIA. TIN PLATED COPPER LEADS 0.180 0.030/0.034 DIA. ALL DIMENSION IN INCHES XMR,XMU XL,XLR,XLU FIG.4 REVERSE RECOVERY TEST METHOD RECOVERY WA VE FORM RECOVERY TEST CIRCUIT FORWARD CONDUCTION R1 +50mA T RR IF 50 OHM D.U.T. + PULSE GENERATOR TIME SWITCHING IR R2 1 OHM -25mA I RR -100mA REVERSE RECOVERY CURRENT SCOPE R1, R2 NON-INDUCTIVE RESISTORS PULSE GENERATOR-HEWLETT PACKARD 214A OR EQUIV. 1 KC REP.RATE, 10 SEC. PULSE WIDTH ADJUST PULSE AMPLITUDE FOR PEAK IR ELECTRONIC DEVICES, INC. DESIGNERS AND MANUFACTURERS OF SOLID STATE DEVICES SINCE 1951. 21 GRAY OAKS AVENUE * YONKERS. NEW YORK 10710 914-965-4400 Ee-mail:[email protected] * Wwebsite: http://www.edidiodes.com * FAX 914-965-5531 * 1-800-678-0828