SAW Components Data Sheet X 7256 D SAW Components X 7256 D Bandpass Filter 57,00 MHz Data Sheet Duroplast package SIP5D Features ■ IF filter for ISDB-T ■ Switchable between two bandwidths ■ Standard IC package 1 2 3 4 5 2,4 4,8 13,7 3,4 Terminals ■ Tinned CuFe alloy 0,65 0,38 4x 2,54 Dimensions in mm, approx. weight 0,5 g 1 Pin configuration 1 2 3 4 5 Input Switching input Chip carrier – ground Output Output 4 2 5 3 Type Ordering code X 7256 D B39570-X7256-N201 Marking and package according to C61157-A1-A21 Packing according to F61074-V8049-Z000 Maximum ratings Operable temperature range TA Storage temperature range Tstg DC voltage AC voltage VDC Vpp –25/+65 –40/+85 ˚C ˚C 5 10 V V 2 between any terminals between any terminals Jan 05, 2005 SAW Components X 7256 D Bandpass Filter 57,00 MHz Data Sheet Characteristics of channel 1 (switching pin 2 connected to ground) Reference temperature: Terminating source impedance: Terminating load impedance: TA = 25 (45) ˚C ZS = 50 Ω ZL = 2 kΩ || 3 pF|| 3 pF min. Insertion attenuation Reference level for the following data typ. max. α 57,08 (57,00) MHz 12,0 Pass bandwidth αrel ≤3 dB αrel ≤30 dB B3dB B30dB Relative attenuation αrel 54,53 (54,45) 59,53 (59,45) 54,03 (53,95) 60,03 (59,95) 60,39 (60,31) — — 13,5 6,0 7,5 15,0 dB — — MHz MHz MHz MHz MHz MHz MHz –0,9 –1,0 — — — 0,1 0,0 3,1 2,8 11,0 1,1 1,0 — — — dB dB dB dB dB (45,00 ... 52,00) MHz (52,00 ... 52,95) MHz 36,0 38,0 44,0 46,0 — — dB dB (60,80 ... 62,50) MHz (62,50 ... 65,00) MHz 28,0 37,0 34,0 43,0 — — dB dB Reflected wave signal suppression 1,2 µs ... 6,0 µs after main pulse (test pulse 250 ns, carrier frequency 57,08 MHz) 42,0 52,0 — dB Feedthrough signal suppression 1,3 µs ... 1,2 µs before main pulse (test pulse 250 ns, carrier frequency 57,08 MHz) — 50,0 — dB — 60 — ns — 0,4||19,0 0,6|| 6,0 — kΩ || pF — kΩ || pF — ppm/K Lower sidelobe 45,08 ... 52,08 52,08 ... 53,03 Upper sidelobe 60,88 ... 62,58 62,58 ... 65,08 Group delay ripple (p-p) ∆τ 54,53 ... 59,53 (54,45 ... 59,45) MHz Impedance at 57,08 MHz Input: ZIN = RIN || CIN Output: ZOUT = ROUT || COUT — TCf Temperature coefficient of frequency 3 — Jan 05, 2005 –72 SAW Components X 7256 D Bandpass Filter 57,00 MHz Data Sheet Characteristics of channel 2 (switching pin 2 connected to pin 1) Reference temperature: Terminating source impedance: Terminating load impedance: TA = 25 (45) ˚C ZS = 50 Ω ZL = 2 kΩ || 3 pF || 3 pF min. Insertion attenuation Reference level for the following data typ. max. α 57,08 (57,00) MHz 10,7, Pass bandwidth αrel ≤3 dB αrel ≤30 dB B3dB B30dB Relative attenuation αrel 12,2 13,7 dB — — 4,1 5,6 — — MHz MHz — — — — 0,6 0,4 45,0 11,0 — — — — dB dB dB dB (45,00 ... 51,50) MHz (51,50 ... 53,75) MHz 39,0 32,0 47,0 40,0 — — dB dB (59,95 ... 62,50) MHz (62,50 ... 65,00) MHz 30,0 37,0 38,0 43,0 — — dB dB Reflected wave signal suppression 1,2 µs ... 6,0 µs after main pulse (test pulse 250 ns, carrier frequency 57,08 MHz) 42,0 53,0 — dB Feedthrough signal suppression 1,3 µs ... 1,2 µs before main pulse (test pulse 250 ns, carrier frequency 57,08 MHz) — 50,0 — dB — 50 — ns — 0,4||24,0 0,6|| 6,0 — kΩ || pF — kΩ || pF — ppm/K Adjacent picture carrier Adjacent sound carrier Lower sidelobe 45,08 ... 51,58 51,58 ... 53,83 Upper sidelobe 60,03 ... 62,58 62,58 ... 65,08 55,18 (55,10) MHz 58,58 (58,50) MHz 53,83 (53,75) MHz 59,33 (59,25) MHz Group delay ripple (p-p) ∆τ 55,68 ... 58,08 (55,60 ... 58,00) MHz Impedance at 57,08 MHz Input: ZIN = RIN || CIN Output: ZOUT = ROUT || COUT — TCf Temperature coefficient of frequency 4 — Jan 05, 2005 –72 SAW Components X 7256 D Bandpass Filter 57,00 MHz Data Sheet Frequency response of channel 1 5 Jan 05, 2005 SAW Components X 7256 D Bandpass Filter 57,00 MHz Data Sheet Frequency response of channel 1 Time domain response of channel 1 6 Jan 05, 2005 SAW Components X 7256 D Bandpass Filter 57,00 MHz Data Sheet Frequency response of channel 2 7 Jan 05, 2005 SAW Components X 7256 D Bandpass Filter 57,00 MHz Data Sheet Frequency response of channel 2 Time domain response of channel 2 8 Jan 05, 2005 SAW Components X 7256 D Bandpass Filter 57,00 MHz Data Sheet Published by EPCOS AG Surface Acoustic Wave Components Division, SAW CE MM PD P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2005. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 9 Jan 05, 2005