PP 139-166Pushbutton.qxd 5/7/02 4:15 PM Page 143 S E R I E S 800A SWITCHES SEALED SUB-MINIATURE PUSHBUTTON SWITCHES SPECIFICATIONS Ratings: Electrical Life: Contact Resistance: 1A @ 120 VAC 50,000 cycles typical 10mΩ max. typical @ 2-4 VDC 100mA for both silver and gold plated contacts. 1,000MΩ min. 1,000 V rms @ sea level. 200 ± 50 gf Insulation Resistance: Dielectric Strength: Operating Force: MATERIALS Case: Plunger: Bushing: Housing: Contacts: Series Model No. Diallyl Phthalate (DAP) Glass filled nylon or glass filled polyster Nickel plated brass Stainless steel Silver or Gold plated copper alloy. Contact Material Termination Seal SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. 800A E WSP8 WSP9 M2 M6 M61 M7 VS2 Q=Silver R=Gold E= Epoxy Seal at Base of Terminal EXAMPLE 800A WSP9 M7 R 2.54 [.100] Model No. 4.57 [.180] 6 5] TYPE WSP8 ON (ON) WSP9 OFF (ON) Schematic 1.09 [0.43] (2 PL) 13.39 [.527] ( ) = Momentary 3.30 [.130] 3 5.08 [.200] 0.51 [.020] 1 P.C. MOUNTING 5.46 [.215] 4.50 [.177] 1 SPST E 0.76 [.030] Epoxy Seal Base 5.08 [.200] 3 5.08 [.200] 8.13 [.320] TERMINATION OPTIONS M2 Phone: 763-504-3525 Fax: 763-531-8235 P.C. Mounting www.e -switch.com [email protected] 143 PP 139-166Pushbutton.qxd 5/7/02 4:15 PM Page 144 S E R I E S 800A SWITCHES SEALED SUB-MINIATURE PUSHBUTTON SWITCHES TERMINATION CONTINUED P.C. MOUNTING M6 SPST 3.53 [.139] 4.39 [.173] 8.13 [.320] 4.41 [.174] EPOXY SEAL BASE 3.30 [.130] 6.10 [.240] .51 [.020] 2.54 [.100] M61 SPST 0.76 [.030] CRIMPED BRACKET 1 0.80 [.031] Switch Support 0.41mm THICK 4.01 [.158] 5.08 [.200] 5.08 [.200] 5.08 [.200] 1.09 P.C. MOUNTING [.043] (4 PL) 1.09 [.043] (4 PL) 5.08 [.200] 5.08 [.200] 3 0.51 [.020] 5.08 [.200] 5.08 [.200] 5.08 [.200] P.C. MOUNTING M7 SPST P.C. MOUNTING SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. FLAT VS-2 SPST CONTACT MATERIAL OPTIONS Q Fixed Terminal: Silver plated copper alloy. Moving Contacts Silver plated copper alloy. Rating: 1 AMP @ 120VAC or 28 VDC. 144 Phone: 763-504-3525 Fax: 763-531-8235 R Fixed Terminal: Copper alloy with gold plate over nickel plate. Moving Contact: Copper alloy with gold plate over nickel plate. Rating: 0.4 VA max. @ 20 VAC or DC max. www.e -switch.com [email protected]