EVERLIGHT 19

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
0603 Package Chip LED (0.3mm Height)
19-218UWD/S327/TR8
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Mono-color type.
․Pb-free.
․The product itself will remain within RoHS
compliant version.
Descriptions
․The 19-218 SMD Taping is much smaller than
lead frame type components, thus enable smaller
board size, higher packing density, reduced
storage space and finally smaller equipment to be
obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Automotive: backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Part No.
19-218UWD/S327/TR8
Everlight Electronics Co., Ltd.
Device No. : DSE-198-001
Chip
Material
InGaN
Emitted Color
Lens Color
Pure White
Yellow Diffused
http://www.everlight.com
Prepared date: 23-Aug-2005
Rev.5
Page: 1 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8
Package Outline Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No. : DSE-198-001
http://www.everlight.com
Prepared date: 23-Aug-2005
Rev.5
Page: 2 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
25
mA
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40 ~ +90
℃
Soldering Temperature
Tsol
260 (for 5 seconds)
℃
Electrostatic Discharge
ESD
150
V
Power Dissipation
Pd
110
mW
Peak Forward Current
(Duty 1/10 @1KHz)
IF
100
mA
Notes:
*We only guarantee the ESD <2000V after customer to process.
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Luminous Intensity
Iv
112
-----
285
mcd
Viewing Angle
2θ1/2
-----
130
-----
deg
Forward Voltage
VF
2.70
-----
3.30
V
Reverse Current
IR
-----
-----
50
μA
Condition
IF=10mA
VR=5V
Notes:
1.Tolerance of Luminous Intensity ±10%
2.Tolerance of Forward Voltage ±0.05V
Everlight Electronics Co., Ltd.
Device No. : DSE-198-001
http://www.everlight.com
Prepared date: 23-Aug-2005
Rev.5
Page: 3 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8
Bin Range Of Luminous Intensity & Forward Voltage
Symbol
Bin Code
Min.
Max.
R1
R2
S1
S2
1
2
3
4
5
6
112
140
180
225
2.70
2.80
2.90
3.00
3.10
3.20
140
180
225
285
2.80
2.90
3.00
3.10
3.20
3.30
IV
VF
Unit
Condition
mcd
IF=10mA
V
IF=10mA
Notes:
1.Tolerance of Luminous Intensity ±10%
2.Tolerance of Forward Voltage ±0.05V
Everlight Electronics Co., Ltd.
Device No. : DSE-198-001
http://www.everlight.com
Prepared date: 23-Aug-2005
Rev.5
Page: 4 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8
Chromaticity Coordinates Specifications for Bin Grading
Bin Code
1
2
3
4
CIE_x
CIE_y
Condition
0.27
0.27
0.29
0.29
0.283
0.27
0.27
0.29
0.29
0.29
0.29
0.31
0.31
0.29
0.29
0.293
0.31
0.31
0.24
0.254
0.283
0.25
0.24
0.254
0.287
0.315
0.283
0.25
0.283
0.311
0.278
0.283
0.315
0.32
0.32
0.311
IF=10mA
Notes:
1.The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01).
2.The products are sensitive to static electricity and care must be fully taken when
handling products.
Everlight Electronics Co., Ltd.
Device No. : DSE-198-001
http://www.everlight.com
Prepared date: 23-Aug-2005
Rev.5
Page: 5 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8
CIE Chromaticity Diagram
0.34
0.33
0.32
0.31
4
0.30
y
0.29
2
0.28
3
0.27
0.26
1
0.25
0.24
0.23
0.25
0.26
0.27
0.28
0.29
0.30
0.31
0.32
x
Everlight Electronics Co., Ltd.
Device No. : DSE-198-001
http://www.everlight.com
Prepared date: 23-Aug-2005
Rev.5
Page: 6 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
Device No. : DSE-198-001
http://www.everlight.com
Prepared date: 23-Aug-2005
Rev.5
Page: 7 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8
Label explanation
CAT: Luminous Intensity Rank
HUE: Chromaticity Coordinates
REF: Forward Voltage Rank
MSL-2
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm , Unit = mm
Everlight Electronics Co., Ltd.
Device No. : DSE-198-001
http://www.everlight.com
Prepared date: 23-Aug-2005
Rev.5
Page: 8 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8
Carrier Tape Dimensions:
Quantity: 3000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Everlight Electronics Co., Ltd.
Device No. : DSE-198-001
http://www.everlight.com
Prepared date: 23-Aug-2005
Rev.5
Page: 9 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8
Detail of MSID label
Detail of Moisture indicator decals
LEVEL
CAUTION
This bag contains
MOISTURE SENSITIVE DEVICES
1.Shelf life in sealed bag:12 months at 5℃~30℃ and <90% relative
Humidity(RH).
2.Devices have to be mounted within 168 hours or stored at 70%RH
after this bag is opened ; otherwise, the warranty of the devices will
be voided immediately.
3.If baking is required , devices may be baked for 24 hours at 65±5°C.
If blank ,see adjacent
bar code label
Note:Level and body temperature define by IPC/JEDEC J-STD-020
Everlight Electronics Co., Ltd.
Device No. : DSE-198-001
http://www.everlight.com
Prepared date: 23-Aug-2005
Rev.5
Page: 10 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
Test
Sample
Hours/Cycles
Size
No.
Items
Test Condition
1
Reflow Soldering
Temp. : 260℃±5℃
Min. 5sec.
6 Min.
22 PCS.
0/1
Temperature Cycle
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
300 Cycles
22 PCS.
0/1
Thermal Shock
H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
300 Cycles
22 PCS.
0/1
Temp. : 100℃
1000 Hrs.
22 PCS.
0/1
Temp. : -40℃
1000 Hrs.
22 PCS.
0/1
2
3
4
5
High Temperature
Storage
Low Temperature
Storage
Ac/Re
6
DC Operating Life
IF = 20 mA
1000 Hrs.
22 PCS.
0/1
7
High Temperature /
High Humidity
85℃/ 85%RH
1000 Hrs.
22 PCS.
0/1
Judgment Criteria of Failure for Reliability Test
Measuring Item
Symbol
Measuring Condition
Judgments Criteria for
Failure
Forward Voltage
VF
IF=10mA
>U x 1.2
Reverse Current
IR
VR=5V
>U x 2.0
Luminous Intensity
IV
IF=10mA
>S x 0.5
Note: U means the upper limit of the specified characteristics. S means the initial value.
Everlight Electronics Co., Ltd.
Device No. : DSE-198-001
http://www.everlight.com
Prepared date: 23-Aug-2005
Rev.5
Page: 11 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1
Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
Device No. : DSE-198-001
http://www.everlight.com
Prepared date: 23-Aug-2005
Rev.5
Page: 12 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable,
a double-head soldering iron should be used (as below figure). It should be confirmed beforehand
whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Everlight Electronics Co., Ltd.
Device No. : DSE-198-001
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
http://www.everlight.com
Prepared date: 23-Aug-2005
Rev.5
Page: 13 of 13
Prepared by: Jeff Tsai