Technical Data Sheet Warm White POWER LED 40-01/X4C-4NQB Features . High Flux Output. . Low Profile. . Low Thermal Resistance. . Low Power Consumption . The phosphor filled in the reflector converts the blue emission of InGaN chip to warm white. . The product itself will remain within RoHS compliant version. . Wide viewing angles115° . Typical chromaticity coordinates x=0.45, y=0.41 according to CIE1931. . ESD-withstand voltage: up to 4KV Descriptions This revolutionary package design allows the light designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED solutions. This is possible through the efficient optical package design and high-current capabilities. The low profile package can be easily coupled with reflectors or lenses to efficiently distribute light and provide the desired light appearance. Applications . Automotive Exterior Lighting . Electronic Signs and Signals . Special Lighting application Device Selection Guide PART NO. 40-01/X4C-4NQB Everlight Electronics Co., Ltd. Device Number : DLE-400-002 Chip Material Emitted Color InGaN White http:\\www.everlight.com Establish date: 03-05-2007 Lens Color Water Clear Rev. 1 Page: 1 of 8 Establish by: Jim Lin Technical Data Sheet Warm White POWER LED 40-01/X4C-4NQB Package Dimensions Notes: 1.All dimensions are in millimeters 2.An epoxy meniscus may extend about 1.5mm(0.059") down the leads 3.Tolerances unless dimensions ±0.25mm Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Units Continuous Forward Current IF 30 mA Peak Forward Current(Duty 1/10 @ 1KHZ) IFP 100 mA Reverse Voltage VR 5 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ Soldering Temperature(T=5 sec) Tsol 260 ± 5 ℃ Power Dissipation Pd 100 mW Zener Reverse Current Iz 100 mA Electrostatic Discharge ESD 4000 V Everlight Electronics Co., Ltd. Device Number : DLE-400-002 http:\\www.everlight.com Establish date: 03-05-2007 Rev. 1 Page: 2 of 8 Establish by: Jim Lin Technical Data Sheet Warm White POWER LED 40-01/X4C-4NQB Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Condition Unit Forward Voltage VF 3.0 3.6 4.0 IF=30mA V Reverse Current IR ---- ---- 10 VR=5V mA Φv 2250 3200 4500 IF=30mA mlm 2θ1/2 ---- 115 ---- IF=30mA deg x ---- 0.45 ---- Total Flux Viewing Angle Chromaticity Coordinates ---IF=30mA y ---- 0.40 ---- Zener Reverse Voltage Vz 5.2 ---- ---- Iz=5mA V Electrostatic Discharge ESD 4000 ---- ---- Human Body Model V Rank 40-01/X4C-4NQB (1) (1) VF(V) (2) ---- (3) (3)Φv(mlm) (2) Color Bin. Min. Max. Bin. Min. Max. Bin. Min. Max. 1 3.00 3.20 ---- ---- N 2250 2850 2 3.20 3.40 E1 E2 ---- ---- P 2850 3600 3 3.40 3.60 F1 ---- ---- Q 3600 4500 4 3.60 3.80 F2 ---- ---- 5 3.80 4.00 *Measurement Uncertainty of Forward Voltage：±0.1V *Measurement Uncertainty of Luminous Intensity: ±15% Everlight Electronics Co., Ltd. Device Number : DLE-400-002 http:\\www.everlight.com Establish date: 03-05-2007 Rev. 1 Page: 3 of 8 Establish by: Jim Lin Technical Data Sheet Warm White POWER LED 40-01/X4C-4NQB CIE Chromaticity Diagram 0.45 0.44 0.43 0.42 F1 CIE-y 0.41 E1 0.40 F2 0.39 E2 0.38 0.37 0.36 0.35 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 0.50 CIE-x Color Ranks (IF=30mA，Ta=25℃) Color Ranks E1 E2 F1 F2 CIE X 0.389 0.398 0.439 0.425 Y 0.382 0.411 0.431 0.400 X 0.382 0.389 0.425 0.412 Y 0.358 0.382 0.400 0.372 X 0.425 0.439 0.497 0.477 Y 0.400 0.431 0.466 0.413 X 0.412 0.425 0.477 0.458 0.413 0.383 Y 0.372 0.400 *Measurement uncertainty of the color coordinates：±0.01 Everlight Electronics Co., Ltd. Device Number : DLE-400-002 http:\\www.everlight.com Establish date: 03-05-2007 Rev. 1 Page: 4 of 8 Establish by: Jim Lin Technical Data Sheet Warm White POWER LED 40-01/X4C-4NQB Typical Electro-Optical Characteristics Curves Relative Intensity vs. Wavelength Forward Current vs. Forward Voltage 30 FORWARD CURRENT (mA) 1.0 Relative Intensity 0.8 0.6 0.4 0.2 0.0 350 400 450 500 550 600 650 700 750 800 850 10 0 2.80 Wavelength(nm) Relative Intensity vs. Forward Current 20 3.00 3.20 3.40 3.60 3.80 FORWARD VOLTAGE (V) 4.00 Forward Current vs. Ambient Temp. 40 1.00 FORWARD CURRENT (mA) RELATIVE INTENSITY 35 0.80 0.60 0.40 0.20 30 25 20 15 10 5 0.00 0 5 10 15 20 25 0 30 FORWARD CURRENT (mA) 20 40 60 80 AMBIENT TEMPERATURE (C) Chromaticity Coordinate vs. Forward Current Radiation Characteristics Chromaticity Coordinates 0.46 0 100 x 0.45 0.44 0.43 0.42 y 0.41 0.40 0.39 0.38 0 10 20 30 40 50 Forward Current(mA) Everlight Electronics Co., Ltd. Device Number : DLE-400-002 http:\\www.everlight.com Establish date: 03-05-2007 Rev. 1 Page: 5 of 8 Establish by: Jim Lin Technical Data Sheet Warm White POWER LED 40-01/X4C-4NQB Packing Quantity Specification (1) 60 pcs/1 tube, 30 tubes/1 small inside box, 12 small inside boxes/1 outside box (2) 60 pcs/1 tube, 105 tubes/1 big inside box, 4 big inside boxes/1 outside box Label Form Specification (1)Tube Label Form PART NO: 40-01/X4C-4NQB QTY: 60 LOT NO: CAT: (2)Box Label Form EVERLIGHT CPN: P/N: RoHS 40-01/X4C-4NQB QTY： LOT NO： CAT: HUE: REF: MADE IN TAIWAN PART NO: Everlgiht’s Production Number QTY: Packing Quantity LOT NO: Lot Number CAT: Ranks of Forward Voltage, Color Bin Grade and Total Flux CPN: Customer’s Production Number P/N : Production Number HUE: Reference REF: Reference MADE IN TAIWAN: Production Place Everlight Electronics Co., Ltd. Device Number : DLE-400-002 http:\\www.everlight.com Establish date: 03-05-2007 Rev. 1 Page: 6 of 8 Establish by: Jim Lin Technical Data Sheet Warm White POWER LED 40-01/X4C-4NQB Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. 4. Below the zener reference voltage Vz, all the current flows through LED and as the voltage rises to Vz, the zener diode “breakdown." If the voltage tries to rise above Vz current flows through the zener branch to keep the voltage at exactly Vz. 5. When the LED is connected using serial circuit, if either piece of LED is no light up but current can’t flow through causing others to light down. In new design, the LED is parallel with zener diode. if either piece of LED is no light up but current can flow through causing others to light. 6. Soldering Condition Everlight Electronics Co., Ltd. Device Number : DLE-400-002 http:\\www.everlight.com Establish date: 03-05-2007 Rev. 1 Page: 7 of 8 Establish by: Jim Lin Technical Data Sheet Warm White POWER LED 40-01/X4C-4NQB Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to case, and soldering beyond the base of the tie bar is recommended. Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Recommended soldering conditions: Hand Soldering DIP Soldering Temp. at tip of iron 400℃ Max. (30W Max.) Preheat temp. 100℃ Max. (60 sec Max.) Soldering time 3 sec Max. Bath temp. 265 Max. Distance 3mm Min.(From solder joint to case) Bath time. 5 sec Max. Distance 3mm Min. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C. Everlight Electronics Co., Ltd. Device Number : DLE-400-002 Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com http:\\www.everlight.com Establish date: 03-05-2007 Rev. 1 Page: 8 of 8 Establish by: Jim Lin