Technical Data Sheet 5 mm Cylindriccal Shape 423-2ASUGC /S400-A6 Features ․High ligh output. ․I.C compatible. ․Available on tape and reel. ․Reliable and robust. ․Most radial lead plastic LED lamp available Packed in tape and reel ․Reel package simplifies handling and treating ․ESD-withstand voltage: up to 4KV ․The product itself will remain within RoHS compliant version. Descriptions ․The series is specially designed for applications requiring higher brightness ․The LED lamps are available with different colors,intensities,epoxy colors, etc. Applications ․TV set ․Monitor ․Telephone ․Computer Device Selection Guide Chip Material InGaN Lens Color Emitted Color Super Green Everlight Electronics Co., Ltd. http\\:www.everlight.com Device Number : DLE-042-082 Prepared date: 01-24-2006 Water Rev 1 Clear Page: 1 of 7 Prepared by: Grace Shen Technical Data Sheet 5 mm Cylindriccal Shape 423-2ASUGC /S400-A6 Package Dimensions Notes: ․All dimensions are in millimeters, tolerance is 0.25mm except being specified. ․Lead spacing is measured where the lead emerges from the package. ․Protruded resin under flange is 1.5mm Max LED. Absolute Maximum Ratings (Ta=25℃) Parameter Forward Current Symbol IF Rating 30 Units mA Pulse Forward Current(Duty1/10@ 1KHz) IFP 100 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ ESD V ℃ mW mA Electrostatic Discharge Soldering Temperature Tsol 4K 260 ±5 Power Dissipation Pd 110 Zener Reverse Current Iz Notes: Soldering time≦5 seconds. 100 *2 Everlight Electronics Co., Ltd. http\\:www.everlight.com Device Number : DLE-042-082 Prepared date: 01-24-2006 Rev 1 Page: 2 of 7 Prepared by: Grace Shen Technical Data Sheet 5 mm Cylindriccal Shape 423-2ASUGC /S400-A6 Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Condition Min. Typ. Max. Units VF IF=20mA -- 3.4 4.1 V IR VR=5V ---- 50 uA μA Zener Reverse Voltage Vz Iz=5mA 5.2 -- -- V Luminous Intensity IV IF=20mA 360 565 -- mcd 2θ1/2 IF=20mA -- 85 -- deg Peak Wavelength λp IF=20mA -- 525 -- nm Dominant Wavelength λd IF=20mA -- 530 -- nm Spectrum Radiation Bandwidth Δλ IF=20mA -- 35 -- nm Forward Voltage Reverse Current Viewing Angle Rank Combination (IF=20mA) Rank Luminous Intensity F G H J 450~565 565~715 715~900 900~1125 *Measurement Uncertainty of Luminous Intensity: ±15% Unit: :mcd Ranks S T U V W Forward Voltage 3.1~3.3 3.3~3.5 3.5~3.7 3.7~3.9 3.9~4.1 *Measurement Uncertainty of Forward Voltage: ±0.1V Rank 3 Unit:V 4 5 Dominant Wavelength 520~524 524~528 *Measurement Uncertainty of Dominant Wavelength ±1.0nm Everlight Electronics Co., Ltd. http\\:www.everlight.com Device Number : DLE-042-082 Prepared date: 01-24-2006 528~532 Unit:nm Rev 1 Page: 3 of 7 Prepared by: Grace Shen Technical Data Sheet 5 mm Cylindriccal Shape 423-2ASUGC /S400-A6 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http\\:www.everlight.com Device Number : DLE-042-082 Prepared date: 01-24-2006 Rev 1 Page: 4 of 7 Prepared by: Grace Shen Technical Data Sheet 5 mm Cylindriccal Shape 423-2ASUGC /S400-A6 Packing Quantity Specification 1.500PCS/1Bag，5Bags/1Box 2.10Boxes/1Carton Label Form Specification RoHS 423-2ASUGC/S400-A6 CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks of Luminous Intensity and Forward Voltage HUE: Ranks of Dominant Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place Everlight Electronics Co., Ltd. http\\:www.everlight.com Device Number : DLE-042-082 Prepared date: 01-24-2006 Rev 1 Page: 5 of 7 Prepared by: Grace Shen Technical Data Sheet 5 mm Cylindriccal Shape 423-2ASUGC /S400-A6 Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. 4. Below the zener reference voltage Vz, all the current flows through LED and as the voltage rises to Vz, the zener diode “breakdown." If the voltage tries to rise above Vz current flows through the zener branch to keep the voltage at exactly Vz. 5. When the LED is connected using serial circuit, if either piece of LED is no light up but current can’t flow through causing others to light down. In new design, the LED is parallel with zener diode. if either piece of LED is no light up but current can flow through causing others to light up Everlight Electronics Co., Ltd. http\\:www.everlight.com Device Number : DLE-042-082 Prepared date: 01-24-2006 Rev 1 Page: 6 of 7 Prepared by: Grace Shen Technical Data Sheet 5 mm Cylindriccal Shape 423-2ASUGC /S400-A6 6. Soldering Condition Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to case, and soldering beyond the base of the tie bar is recommended. Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Recommended soldering conditions: Hand Soldering DIP Soldering Temp. at tip of iron 400℃ Max. (30W Max.) Preheat temp. 100℃ Max. (60 sec Max.) Soldering time 3 sec Max. Bath temp. 265 Max. Distance 3mm Min.(From solder joint to case) Bath time. 5 sec Max. Distance 3mm Min. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com Everlight Electronics Co., Ltd. http\\:www.everlight.com Device Number : DLE-042-082 Prepared date: 01-24-2006 Rev 1 Page: 7 of 7 Prepared by: Grace Shen