EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs with Black Surface 67-01/YSC-CU1V1/2T/MS Features ․Pb-free. ․Inner reflector. ․White package. ․Optical indicator. ․P-LCC-2 package. ․Wide viewing angle. ․Colorless clear resin. ․Precondition：Base on JEDEC Level-2. ․ESD：Up to 2KV. (Base JESD22-A114-B) ․The product itself will remain within RoHS compliant version. ․Suitable for vapor-phase reflow, infrared reflow and wave solder processes. Descriptions ․The 67-01 series is available for orange, green, blue and yellow or other color due to the different raw material. ․Base on the package design, the device result in wide view angle. Applications ․OA Equipment ․Backlighting of Full Color LCD ․Automotive Equipment ․Replacement of Conventional Light Bulbs and Fluorescent Lamps Device Selection Guide Chip Emitted Color Resin Color Brilliant Yellow Water Clear Material AlGalnP Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-671-B22 prepared date:14-Dec-2006 Rev. 1 Page: 1 of 10 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs with Black Surface 67-01/YSC-CU1V1/2T/MS Package Outline Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-671-B22 prepared date:14-Dec-2006 Rev. 1 Page: 2 of 10 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs with Black Surface 67-01/YSC-CU1V1/2T/MS Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 50 mA Operating Temperature Topr -40 ~ +100 ℃ Storage Temperature Tstg -40~ +100 ℃ Electrostatic Discharge(HBM) ESD 2000 V Power Dissipation Pd 120 mW Peak Forward Current(Duty 1/10 @ 1KHZ) IFP 100 mA Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 450 ----- 900 mcd IF=20mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA Peak Wavelength λp ----- 591 ----- nm IF=20mA Dominant Wavelength λd 585.5 ----- 591.5 nm IF=20mA Spectrum Radiation Bandwidth △λ ----- 20 ----- nm IF=20mA Forward Voltage VF 1.95 ----- 2.35 V IF=20mA Reverse Current IR ----- ----- 10 μA VR=5V Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-671-B22 prepared date:14-Dec-2006 Rev. 1 Page: 3 of 10 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs with Black Surface 67-01/YSC-CU1V1/2T/MS Bin Range of Luminous Intensity Bin Min. U1 450 U2 565 V1 715 Bin Range of Dominant Wavelength Group Bin Code D3 D4 Bin Range of Forward Voltage Bin Min. 1 1.95 2 2.15 Notes: C Max. 565 Unit Condition 715 900 mcd IF=20mA Min. Max. Unit Condition 585.5 588.5 588.5 591.5 nm IF=20mA Unit Condition V IF=20mA Max. 2.15 2.35 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-671-B22 prepared date:14-Dec-2006 Rev. 1 Page: 4 of 10 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs with Black Surface 67-01/YSC-CU1V1/2T/MS Typical Electro-Optical Characteristics Curves Forward Current vs. Forward Voltage Ta=25°C Forward Current IF (mA) 100 75 50 25 0 500 550 600 650 Wavelength λ (nm) 60 50 40 30 1.0 10 0 20 40 60 80 100 1000 2.2 2.6 3.0 f=1KHz Duty=1/10 100 10 1 0 10 10 1 10 2 Forward Current IF (mA) Ambient Temperature Ta (°C) Radiation Diagram 0° 10° Forward Current Derating Curve Forward Current IF (mA) 1.8 Relative Luminous Intensity vs. Forward Current Ta=25°C 100 1 -60 -40 -20 1.4 Forward Voltage VF (V) Relative Luminous Intensity vs. Ambient Temperature 1000 Ta=25°C 70 20 700 Relative luminous intensity (%) Relative luminous intensity (%) Relative luminous intensity (%) Spectrum Distribution 80 Ta=25°C 20° 30° 70 60 50 40 30 20 0.9 50° 0.8 60° 70° 0.7 10 0 40° 1.0 20 40 60 85 100 Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-671-B22 prepared date:14-Dec-2006 80° 90° 0.5 0.3 0.1 0.2 Rev. 1 0.4 0.6 Page: 5 of 10 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs with Black Surface 67-01/YSC-CU1V1/2T/MS Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-671-B22 prepared date:14-Dec-2006 Rev. 1 Page: 6 of 10 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs with Black Surface 67-01/YSC-CU1V1/2T/MS Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel. Note: The tolerances unless mentioned is ±0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-671-B22 prepared date:14-Dec-2006 Desiccant Rev. 1 Label Page: 7 of 10 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs with Black Surface 67-01/YSC-CU1V1/2T/MS Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering 2 Temperature Cycle 3 Thermal Shock 4 5 High Temperature Storage Low Temperature Storage Test Condition Temp. : 260℃±5℃ 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Test Sample Ac/Re Hours/Cycles Size 6 min 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA / 25℃ 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-671-B22 prepared date:14-Dec-2006 Rev. 1 Page: 8 of 10 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs with Black Surface 67-01/YSC-CU1V1/2T/MS Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. . 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-671-B22 prepared date:14-Dec-2006 Rev. 1 Page: 9 of 10 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs with Black Surface 67-01/YSC-CU1V1/2T/MS 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-671-B22 prepared date:14-Dec-2006 Rev. 1 Page: 10 of 10 Prepared by: Teresa Lee