EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-21/B3C-BN1Q2N/2T Features ˙P-LCC-2 package. ˙White package. ˙Optical indicator. ˙Colorless clear window. ˙Wide viewing angle. ˙Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ˙Computable with automatic placement equipment. ˙Available on tape and reel (8mm Tape). ˙Pb-free Descriptions ˙The 67-21 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes TOP LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ˙Automotive: backlighting in dashboard and switch. ˙Telecommunication: indicator and backlighting in telephone and fax. ˙Flat backlight for LCD, switch and symbol. ˙Light pipe application. ˙General use. Device Selection Guide Chip Material Emitted Color Resin Color Blue Water Clear InGaN/SiC Everlight Electronics Co., Ltd. Device No. : DSE-671-606 http://www.everlight.com Prepared date:06-Nov-2007 Rev. 1 Page: 1 of 10 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-21/B3C-BN1Q2N/2T Package Dimensions Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-671-606 http://www.everlight.com Prepared date:06-Nov-2007 Rev. 1 Page: 2 of 10 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-21/B3C-BN1Q2N/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 30 mA IFP 100 mA Power Dissipation Pd 130 mW Electrostatic Discharge (HBM) ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @1KHz) -40 ~ +90 ℃ Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 28.5 ----- 112 mcd IF=20mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA Peak Wavelength λP ----- 468 ----- nm IF=20mA Dominant Wavelength Spectrum Radiation Bandwidth λd 464.5 ----- 473.5 nm IF=20mA △λ ----- 26 ----- nm IF=20mA Forward Voltage VF 2.7 ----- 3.7 V IF=20mA Reverse Current IR ----- ----- 50 µA VR=5V Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. Device No. : DSE-671-606 http://www.everlight.com Prepared date:06-Nov-2007 Rev. 1 Page: 3 of 10 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-21/B3C-BN1Q2N/2T Bin Rang of Luminous Intensity Bin Min Max N1 28.5 36.0 N2 36.0 45.0 P1 45.0 57.0 P2 57.0 72.0 Q1 72.0 90.0 Q2 90.0 112.0 Unit Condition mcd IF=20mA Unit Condition nm IF=20mA Unit Condition V IF=20mA Bin Range of Dominant Wavelength Group Bin Code Min. Max. A9 464.5 467.5 A10 467.5 470.5 A11 470.5 473.5 Bin Min Max 10 2.70 2.90 11 2.90 3.10 12 3.10 3.30 13 3.30 3.50 14 3.50 3.70 B Bin Rang of Forward Voltage Group N Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. Device No. : DSE-671-606 http://www.everlight.com Prepared date:06-Nov-2007 Rev. 1 Page: 4 of 10 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-21/B3C-BN1Q2N/2T Typical Electro-Optical Characteristics Curves Spectrum Distribution Forward Current vs. Forward Voltage Ta=25°C Forward Current 75 50 25 0 400 450 500 550 40 30 20 10 0 2.4 800 Wavelength λ (nm) Forward Current Ambient Temperature 100 10 1 -60 -40 -20 0 20 40 60 80 100 Relative Luminous Intensity (%) Relative Luminous Intensity (%) 1000 2.6 3.0 3.4 3.8 4.2 Forward Voltage (VF)-volts Relative Luminous Intensity vs Relative Luminous Intensity vs. 1000 Ta=25°C f=1KHz Duty=1/10 100 10 1 0 10 1 10 2 10 Forward Current IF(mA) Ambient Temperature Ta (°C) Radiation Diagram Forward Current Derating Curve 0° 50 Forward Current I (mA) F Ta=25°C 50 IF (mA) Relative luminous intensity (%) 100 10° Ta=25°C 20° 30° 40 30 40° 1.0 20 10 0.9 50° 0.8 60° 70° 0.7 0 20 40 60 80 100 Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd. Device No. : DSE-671-606 80° 90° 0.5 0.3 http://www.everlight.com Prepared date:06-Nov-2007 0.1 0.2 0.4 0.6 Rev. 1 Page: 5 of 10 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-21/B3C-BN1Q2N/2T Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-671-606 http://www.everlight.com Prepared date:06-Nov-2007 Rev. 1 Page: 6 of 10 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-21/B3C-BN1Q2N/2T Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel. Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. Device No. : DSE-671-606 Desiccant http://www.everlight.com Prepared date:06-Nov-2007 Label Rev. 1 Page: 7 of 10 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-21/B3C-BN1Q2N/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering 2 Temperature Cycle 3 Thermal Shock 4 Test Condition Test Hours/Cycles Sample Size Ac/Re 6 Min. 22 PCS. 0/1 22 PCS. 0/1 22 PCS. 0/1 Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. Device No. : DSE-671-606 http://www.everlight.com Prepared date:06-Nov-2007 300 Cycles Rev. 1 Page: 8 of 10 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-21/B3C-BN1Q2N/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. : DSE-671-606 http://www.everlight.com Prepared date:06-Nov-2007 Rev. 1 Page: 9 of 10 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-21/B3C-BN1Q2N/2T 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No. : DSE-671-606 Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com Prepared date:06-Nov-2007 Rev. 1 Page: 10 of 10 Prepared by:Teresa