EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Reverse Package Top View LEDs 67-21UYOC/S530-XX/TR10 Features ․P-LCC-2 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Wide viewing angle. ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment. ․Available on tape and reel (12mm Tape). ․Pb-free. ․The product itself will remain within RoHS compliant version Descriptions ․The 67-21 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the TOP View LEDs ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Automotive: backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․Light pipe application. ․General use. Device Selection Guide Chip Material Emitted Color AlGaInP Brilliant Orange Lens Color Water Clear verlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 1 of 9 Device No. : DSE-671-237 Prepared date 18.Sep.2005 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21UYOC/S530-XX/TR10 Package Dimensions CL - + Polarity For reflow soldering (propose) Note : Tolerances dimension ±0.1 unless otherwise noted Unit : mm verlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 2 of 9 Device No. : DSE-671-237 Prepared date 18.Sep.2005 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21UYOC/S530-XX/TR10 Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ Electrostatic Discharge(HBM) ESD 2000 V Power Dissipation Pd 60 mW IFP 60 mA Peak Forward Current (Duty 1/10 @1KHz) Reflow Soldering : 260 ℃ for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 ℃ for 3 sec. verlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 3 of 9 Device No. : DSE-671-237 Prepared date 18.Sep.2005 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21UYOC/S530-XX/TR10 Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Luminous intensity Iv *Chip Rank Min. Typ. A2 40 55 A3 50 83 A4 63 95 A5 80 123 A6 100 154 A7 125 215 A8 140 251 Max. Unit Condition ----- mcd IF=20mA Viewing Angle 2θ1/2 ----- ----- 120 ----- deg IF=20mA Peak Wavelength λp ----- ----- 611 ----- nm IF=20mA Dominant Wavelength λd ----- 605 ----- nm IF=20mA Spectrum Radiation Bandwidth △λ ----- ----- 17 ----- nm IF=20mA Forward Voltage VF ----- 1.7 2.0 2.4 V IF=20mA Reverse Current IR 10 μA VR=5V ----- *67-21UYOC/S530-XX/TR10 Chip Rank verlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 4 of 9 Device No. : DSE-671-237 Prepared date 18.Sep.2005 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21UYOC/S530-XX/TR10 Typical Electro-Optical Characteristics Curves verlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 5 of 9 Device No. : DSE-671-237 Prepared date 18.Sep.2005 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21UYOC/S530-XX/TR10 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm verlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 6 of 9 Device No. : DSE-671-237 Prepared date 18.Sep.2005 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21UYOC/S530-XX/TR10 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Note: Tolerances Unless Dimension ±0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label verlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 7 of 9 Device No. : DSE-671-237 Prepared date 18.Sep.2005 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21UYOC/S530-XX/TR10 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering 2 Temperature Cycle 3 4 5 Thermal Shock High Temperature Storage Low Temperature Storage Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min Test Sample Ac/Re Hours/Cycles Size 6 Min. 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 verlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 8 of 9 Device No. : DSE-671-237 Prepared date 18.Sep.2005 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21UYOC/S530-XX/TR10 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. verlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 9 of 9 Device No. : DSE-671-237 Prepared date 18.Sep.2005 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-21UYOC/S530-XX/TR10 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com verlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 10 of 9 Device No. : DSE-671-237 Prepared date 18.Sep.2005 Prepared by: Teresa Lee