EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 7343/Y5C2-AQTB/X/MS Features ˙Popular T-1 3/4 diameter package. ˙Choice of various viewing angles. ˙Available on tape and reel. ˙Reliable and robust. ˙The product itself will remain within RoHS compliant version. ˙UV resistant epoxy Descriptions ˙The series is specially designed for applications requiring higher brightness. ˙The LED lamps are available with different colors, intensities, epoxy colors, etc. ˙Superior performance in outdoor environment Applications ˙Color Graphic Signs ˙Message boards ˙Variable message signs (VMS) ˙Commercial outdoor advertising Device Selection Guide LED Part No. 7343/Y5C2-AQTB/MS 7343/Y5C2-AQTB/P/MS Chip Chip Material Emitted Color AlGaInP Brilliant Yellow Lens Color Water Clear Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev 1 Device Number : DLE-738-114 Prepared date:09-09 -2006 Prepared : Grace Shen Stopper No Yes Page: 1 of 7 EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 7343/Y5C2-AQTB/X/MS Package Dimensions Stopper type No Stopper type Notes: ˙All dimensions are in millimeters, tolerance is 0.25mm except being specified. ˙Lead spacing is measured where the lead emerges from the package. ˙Protruded resin under flange is 1.5mm Max LED. Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev 1 Page: 2 of 7 Device Number : DLE-738-114 Prepared date:09-09 -2006 Prepared : Grace Shen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 7343/Y5C2-AQTB/X/MS Absolute Maximum Ratings (Ta=25℃) Parameter Forward Current Pulse Forward Current*1 Symbol IF IFP Rating 50 160 Operating Temperature Topr -40 ~ +85 Units mA mA ℃ Storage Temperature Tstg -40 ~ +100 ℃ ESD V ℃ mW V Electrostatic Discharge Soldering Temperature Tsol 2K 260 ±5 Power Dissipation Reverse Voltage Pd VR 115 5 *2 Notes: *1:IFP Conditions--Pulse Width≦10msec and Duty≦1/10. *2:Soldering time≦5 seconds. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Condition Min. Typ. Max. Units Forward Voltage VF IF=20mA 1.8 2.2 2.6 V Luminous Intensity IV IF=20mA 3600 5650 9000 mcd 2θ1/2 IF=20mA -- 25 -- deg Peak Wavelength λp IF=20mA -- 591 -- nm Dominant Wavelength λd IF=20mA 586 589 594 nm Spectrum Radiation Bandwidth Δλ IF=20mA -- 15 -- nm IR VR=5V -- -- 10 μA Viewing Angle Reverse Current Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev 1 Page: 3 of 7 Device Number : DLE-738-114 Prepared date:09-09 -2006 Prepared : Grace Shen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 7343/Y5C2-AQTB/X/MS Rank Combination (IF=20mA) Rank Q R S T Luminous Intensity 3600~4500 4500~5650 5650~7150 7150~9000 *Measurement Uncertainty of Luminous Intensity: ±15% Rank Forward Voltage Unit: :mcd 1 2 3 4 1.8~2.0 2.0~2.2 2.2~2.4 2.4~2.6 *Measurement Uncertainty of Forward Voltage: ±0.1V Rank Unit:V 1 2 Dominant Wavelength 586~590 *Measurement Uncertainty of Dominant Wavelength ±1.0nm 590~594 Unit:nm *The quantity ratio of the ranks is decided by EVERLIGHT. Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev 1 Page: 4 of 7 Device Number : DLE-738-114 Prepared date:09-09 -2006 Prepared : Grace Shen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 7343/Y5C2-AQTB/X/MS Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev 1 Page: 5 of 7 Device Number : DLE-738-114 Prepared date:09-09 -2006 Prepared : Grace Shen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 7343/Y5C2-AQTB/X/MS Packing Quantity Specification 1.500PCS/1Bag，5Bags/1Box 2.10Boxes/1Carton Label Form Specification EVERLIGHT CPN: P/N: 7343/Y5C2-AQTB/X/MS QTY： CAT: HUE: LOT NO： REF: CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks of Luminous Intensity and Forward Voltage HUE: Ranks of Dominant Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place MADE IN TAIWAN Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev 1 Page: 6 of 7 Device Number : DLE-738-114 Prepared date:09-09 -2006 Prepared : Grace Shen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 7343/Y5C2-AQTB/X/MS Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. 4. Soldering Condition Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to case, and soldering beyond the base of the tie bar is recommended. Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Recommended soldering conditions: Hand Soldering DIP Soldering Temp. at tip of iron 400℃ Max. (30W Max.) Preheat temp. 100℃ Max. (60 sec Max.) Soldering time 3 sec Max. Bath temp. 265 Max. Distance 3mm Min.(From solder joint to case) Bath time. 5 sec Max. Distance 3mm Min. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev 1 Page: 7 of 7 Device Number : DLE-738-114 Prepared date:09-09 -2006 Prepared : Grace Shen