Technical Data Sheet 0.51" Dual Digit SMD Displays ELSD-505SYGWA/S530-E2 Features ˙Packaged in tape and reel for SMT manufacturing. ˙Design flexibility(common cathode or anode). ˙Categorized for luminous intensity. ˙The thickness is thinness than tradition display. ˙Pb free ˙The product itself will remain with RoHS compliant version. Descriptions ˙The SMD type is much smaller than tradition type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Applications ˙Suitable for indoor use. ˙Audio system. ˙Set top box. ˙Game machine. ˙Channel indicator of TV. Device Selection Guide Chip Face Color Material Emitted Color AlGaInP Brilliant Yellow Green Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: CDGD-505-001 Prepared date:2007/5/4 Gray Rev.：3 Page: 1 of 8 Prepared by: Li Jing jing ELSD-505SYGWA/S530-E2 Land Pattern(Recommend) Package Dimensions Notes: ˙All dimensions are in millimeters, tolerance is 0.25mm unless otherwise noted. ˙Above specification may be changed without notice. Supplier will reserve authority on material change for above specification. Absolute Maximum Ratings (Ta=25℃) Parameter Forward Current Pulse Forward Current*1 Symbol IF IFP Rating 25 60 Operating Temperature Topr -40 ~ +85 Units mA mA ℃ Storage Temperature Tstg -40 ~ +85 ℃ Tref 260 ℃ ESD Pd VR 2000 60 5 V mW V Reflow Temperature *2 Electrostatic Discharge Power Dissipation Reverse Voltage Notes: *1:IFP Conditions--Pulse Width≦10msec and Duty≦1/10. *2:Soldering time≦5 seconds. Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: CDGD-505-001 Prepared date:2007/5/4 Rev.：3 Page: 2 of 8 Prepared by: Li Jing jing ELSD-505SYGWA/S530-E2 Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Units Condition Forward Voltage VF -- 2.1 2.4 V IF=20mA Reverse Current IR -- -- 10 μA VR=5V 5.6 9.5 -mcd IF=10mA Luminous Per segment Intensity Per decimal point IV 2.0 4.3 -- Peak Wavelenght λp -- 575 -- nm IF=20mA Dominant Wavelenght λd -- 573 -- nm IF=20mA Spectrum Radiation Bandwidth △λ -- 20 -- nm IF=20mA Chromaticity Coordinates Specifications for Bin Grading (Unit: mcd) Rank Min. Max. Rank Min. Max. P 5.6 8.9 S 15.0 24.0 Q 7.8 12.5 T 21.0 34.0 R 11.0 17.6 -- -- -- Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: CDGD-505-001 Prepared date:2007/5/4 Rev.：3 Page: 3 of 8 Prepared by: Li Jing jing ELSD-505SYGWA/S530-E2 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: CDGD-505-001 Prepared date:2007/5/4 Rev.：3 Page: 4 of 8 Prepared by: Li Jing jing ELSD-505SYGWA/S530-E2 ■ Reflow Temp. / Time : ■ Soldering Iron : Basic spec is ≦5 sec when 260℃.If temperature is higher, time should be shorter (+10℃ → -1sec). Power dissipation of iron should be smaller than 15 W , and temperature should be controllable. Surface temperature of the device should be under 230 ℃. ■ Rework : 1. Customer must finish rework within 5 sec under 260℃. 2. The head of iron can not touch copper foil. Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: CDGD-505-001 Prepared date:2007/5/4 Rev.：3 Page: 5 of 8 Prepared by: Li Jing jing ELSD-505SYGWA/S530-E2 ■ Reliability test items and conditions: The reliability of products shall be satisfied with items listed below. Confidence level：97% LTPD：3% Failure Judgment Criteria NO Item Test Conditions Test Hours/Cycle Sample Size 1 Reflow TEMP:260°C±5°C 5 SEC 76 PCS 0/1 Temperature Cycle H：+100°C 15min ∫ 5min L：-40°C 15min 300 CYCLES 76 PCS 0/1 Thermal Shock H：+100°C 5min ∫ 10 sec L：-10°C 5min 300 CYCLES 76 PCS 0/1 2 3 Iv≦Ivt*0.5 or Vf≧U or Vf≦L Ac/Re 4 High Temperature Storage TEMP:100°C 1000 HRS 76PCS 5 Low Temperature Storage TEMP:-40°C 1000 HRS 76 PCS 0/1 DC Operating Life TEMP:25°C If＝10mA 1000 HRS 76 PCS 0/1 85°C / 85% RH 1000 HRS 76 PCS 0/1 6 7 High Temperature / High Humidity Note：Ivt：The test Iv value of the chip before the reliablility test Iv：The test value of the chip that has completed the reliablility test U：Upper Specification Limit L： Lower Specification Limit Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: CDGD-505-001 Prepared date:2007/5/4 Rev.：3 Page: 6 of 8 Prepared by: Li Jing jing 0/1 ELSD-505SYGWA/S530-E2 Package Dimensions 03 A(44.5) 03 03 03 03 8 9 10 C(100) 03 5 6 7 11 12 1 B(2.30) 2 3 4 1 2 3 6 4 5 P S 6 7 8 D(330) F G E R1 40.4±0.10 Taping Dimensions R0 .7 5 2 0.2±0.05 2 Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: CDGD-505-001 Prepared date:2007/5/4 Rev.：3 Page: 7 of 8 Prepared by: Li Jing jing ELSD-505SYGWA/S530-E2 Packing Quantity Specification 500PCS/Roll，4Rolls/Box Label Form Specification CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number DC: Year and weekly Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’sconsent. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiwan, R.O.C http:\\www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: CDGD-505-001 Prepared date:2007/5/4 Rev.：3 Page: 8 of 8 Prepared by: Li Jing jing