Technical Data Sheet 5mm Infrared LED, T-1 3/4 IR333C/H2/L10 Features ․High reliability ․2.54mm lead spacing ․Low forward voltage ․Good spectral matching to Si photodetector ․High radiant intensity ․Pb free ․The product itself will remain within RoHS compliant version. Descriptions EVERLIGHT’s infrared emitting diode (IR333C/H2/L10) is a high intensity diode, molded in a water clear plastic package. The device is spectrally matched with phototransistor, photodiode and infrared receive module. Applications ․Free air transmission system ․Optoelectronic switch ․Floppy disk drive ․Infrared applied system ․Smoke detector Device Selection Guide LED Part No. IR Chip Material GaAlAs Lens Color Water clear Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Page: 1 of 7 Device No：DIR-033-143 Prepared date：07-20-2005 Prepared by：David Huang IR333C/H2/L10 Package Dimensions Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions ±0.25mm Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Continuous Forward Current IF 100 Units mA Peak Forward Current IFP 1.0 A Reverse Voltage VR 5 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +85 ℃ *2 Tsol 260 ℃ Power Dissipation at(or below) 25℃Free Air Temperature Pd 150 mW Soldering Temperature *1 Notes: *1:IFP Conditions--Pulse Width≦100μs and Duty≦1%. *2:Soldering time≦5 seconds. Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Page: 2 of 7 Device No：DIR-033-143 Prepared date：07-20-2005 Prepared by：David Huang IR333C/H2/L10 Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Ee Radiant Intensity Condition IF=20mA Min. 7.8 15 -- IF=100mA -- 70 -- -- 700 --- nm -- nm Pulse Width≦100μs and Duty≦1% IF=1A Pulse Width≦100μs and Duty≦1% Typ. Max. Peak Wavelength λp IF=20mA -- Spectral Bandwidth Δλ IF=20mA -- 940 45 IF=20mA -- 1.2 1.5 IF=100mA -- 1.4 1.8 -- 2.6 4.0 VR=5V -- -- 10 IF=20mA -- 30 -- Forward Voltage VF Pulse Width≦100μs and Duty≦1% IF=1A Pulse Width≦100μs and Duty≦1% Reverse Current View Angle IR 2θ1/2 Units mW/sr Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Device No：DIR-033-143 Prepared date：07-20-2005 Prepared by：David Huang V μA deg Page: 3 of 7 IR333C/H2/L10 Typical Electro-Optical Characteristics Curves Fig.1 Forward Current vs. Ambient Temperature Fig.2 Spectral Distribution 140 100 120 IF=20mA Ta=25° C 80 100 80 60 60 40 40 20 20 0 0 -40 -20 0 Fig.3 20 40 60 80 100 Peak Emission Wavelength Ambient Temperature Fig.4 Forward Current vs. Forward Voltage 4 10 980 960 3 10 940 2 10 920 900 -25 1 10 0 25 50 75 100 0 1 2 3 Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Page: 4 of 7 Device No：DIR-033-143 Prepared date：07-20-2005 Prepared by：David Huang 4 IR333C/H2/L10 Typical Electro-Optical Characteristics Curves Fig.5 Relative Intensity vs. Forward Current Fig.6 Relative Radiant Intensity vs. Angular Displacement -20 Ie-Radiant Intensity(mW/sr) 1000 -10 0 10 20 30 100 10 0 0 10 1 10 2 10 10 3 10 4 1.0 40 0.9 50 0.8 0.7 60 70 80 0.6 0.4 0.2 0 0.2 0.4 0.6 IF-Forward Current (mA) Fig.7 Relative Intensity vs. Ambient Temperature(°C) Fig.8 Forward Voltage vs. Ambient Temperature(°C) 1.3 Ie-Radiant Intensity (mW/sr) 30 20 1.2 IF=20mA 10 1.1 0 1 25 50 75 100 120 IF=20mA 25 50 75 100 Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Device No：DIR-033-143 Prepared date：07-20-2005 Prepared by：David Huang 120 Page: 5 of 7 IR333C/H2/L10 Reliability Test Item And Condition The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% NO. Item 1 Solder Heat Test Conditions Test Hours/ Sample Cycles Sizes TEMP.：260℃±5℃ 10secs 22pcs 300Cycles 22pcs 300Cycles 22pcs 2 Temperature Cycle H : +100℃ 3 Thermal Shock 15mins L : -40℃ 5mins 15mins H :+100℃ 5mins L :-10℃ 10secs 5mins Failure Judgement Criteria Ac/Re 0/1 IR≧U×2 Ee≦L×0.8 VF≧U×1.2 0/1 0/1 U：Upper Specification Limit L：Lower 4 High Temperature Storage TEMP.：+100℃ 1000hrs 22pcs 5 Low Temperature Storage TEMP.：-40℃ 1000hrs 22pcs 1000hrs 22pcs 0/1 1000hrs 22pcs 0/1 6 DC Operating Life IF=20mA 7 High Temperature/ 85℃ / 85% R.H Specification Limit 0/1 0/1 High Humidity Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Page: 6 of 7 Device No：DIR-033-143 Prepared date：07-20-2005 Prepared by：David Huang IR333C/H2/L10 Packing Quantity Specification 1.500PCS/1Bag，5Bags/1Box 2.10Boxes/1Carton Label Form Specification CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place RoHS IR333C/H2/L10 Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Page: 7 of 7 Device No：DIR-033-143 Prepared date：07-20-2005 Prepared by：David Huang