EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 0.5mm Height Chip LED with Full Color 19-137/R6GHBHC-A01/2T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Full-color type. ․Pb-free. ․ESD protection ․The product itself will remain within RoHS compliant version. Descriptions ․The 19-137 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Type Material Emitted Color R6 AlGaInP Brilliant Red GH InGaN Brilliant Green BH InGaN Blue Lens Color Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 12 Device No. : DSE-137-A01 Prepared date: 06-Apr-2006 Prepared by : Alex Chen EVERLIGHT ELECTRONICS CO.,LTD. 19-137/R6GHBHC-A01/2T Package Outline Dimensions 1.6 G 3 1 4 B 1.6 2 Anode mark R 1.1 1.0 0.8 2 3 4 1 0.55 0.55 0.35 0.55 4 0.55 1 2 0.8 3 2.4 Note: The tolerance unless mentioned is ±0.1mm,unit is mm. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 12 Device No. : DSE-137-A01 Prepared date: 06-Apr-2006 Prepared by : Alex Chen EVERLIGHT ELECTRONICS CO.,LTD. 19-137/R6GHBHC-A01/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V R6:25 Forward Current IF GH:25 mA BH:25 Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Electrostatic Discharge(HBM) ESD 2000 V R6:60 Power Dissipation Pd GH:110 mW BH:110 Peak Forward Current (Duty 1/10 @1KHz) Soldering Temperature R6:60 IFP GH:100 mA BH:100 Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 12 Device No. : DSE-137-A01 Prepared date: 06-Apr-2006 Prepared by : Alex Chen EVERLIGHT ELECTRONICS CO.,LTD. 19-137/R6GHBHC-A01/2T Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Luminous Intensity Iv Min. Typ. R6 72 100 GH 112 180 BH 28.5 50 ----- 120 2θ1/2 Viewing Angle Dominant Wavelength Spectrum Radiation Bandwidth λp λd GH ----- 468 R6 624 ----- 470 R6 20 △λ GH VF 525 BH ----- BH Forward Voltage 518 BH GH 35 IR ----- mcd ----- deg ----- nm ----- nm ----- nm R6 1.7 2.0 2.4 GH 2.7 3.3 3.7 BH 2.7 3.3 3.7 GH Condition IF=20mA 35 V 10 R6 Reverse Current Unit 632 R6 Peak Wavelength Max. ----- ----- NA μA VR=5V NA BH Notes: 1.Tolerance of Luminous Intensity ±10% Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 12 Device No. : DSE-137-A01 Prepared date: 06-Apr-2006 Prepared by : Alex Chen EVERLIGHT ELECTRONICS CO.,LTD. 19-137/R6GHBHC-A01/2T Typical Electro-Optical Characteristics Curves R6 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 12 Device No. : DSE-137-A01 Prepared date: 06-Apr-2006 Prepared by : Alex Chen EVERLIGHT ELECTRONICS CO.,LTD. 19-137/R6GHBHC-A01/2T Typical Electro-Optical Characteristics Curves GH Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 12 Device No. : DSE-137-A01 Prepared date: 06-Apr-2006 Prepared by : Alex Chen EVERLIGHT ELECTRONICS CO.,LTD. 19-137/R6GHBHC-A01/2T Typical Electro-Optical Characteristics Curves BH Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 12 Device No. : DSE-137-A01 Prepared date: 06-Apr-2006 Prepared by : Alex Chen EVERLIGHT ELECTRONICS CO.,LTD. 19-137/R6GHBHC-A01/2T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerance unless mentioned is ±0.1mm,unit is mm. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 12 Device No. : DSE-137-A01 Prepared date: 06-Apr-2006 Prepared by : Alex Chen EVERLIGHT ELECTRONICS CO.,LTD. 19-137/R6GHBHC-A01/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerance unless mentioned is ±0.1mm ,unit is mm. Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 12 Device No. : DSE-137-A01 Prepared date: 06-Apr-2006 Prepared by : Alex Chen EVERLIGHT ELECTRONICS CO.,LTD. 19-137/R6GHBHC-A01/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage Ac/Re 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85% RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 12 Device No. : DSE-137-A01 Prepared date: 06-Apr-2006 Prepared by : Alex Chen EVERLIGHT ELECTRONICS CO.,LTD. 19-137/R6GHBHC-A01/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 11 of 12 Device No. : DSE-137-A01 Prepared date: 06-Apr-2006 Prepared by : Alex Chen EVERLIGHT ELECTRONICS CO.,LTD. 19-137/R6GHBHC-A01/2T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 12 of 12 Device No. : DSE-137-A01 Prepared date: 06-Apr-2006 Prepared by : Alex Chen