EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Power LED – 0.5W EHP-A09/SUR31-PU5/TR Features Feature of the device: small package with high efficiency Typical view angle: 120° ESD protection. Soldering methods: SMT Grouping parameter: luminous Intensity, wavelength, forward voltage. Typical optical efficiency: 36 lm/W. Thermal resistance (junction to sink): 65 K/W The product itself will remain within RoHS compliant version. Applications Interior and exterior automotive lighting (e.g. turn light and brake lights) Indoor and outdoor commercial and residential architectural illumination Alert lighting and signal Portable light source Marker lights (e.g. steps, exit ways, etc.) Materials Items Description Reflector Heat resistant polymer Encapsulating Resin Colorless clear resin Electrodes Ag plating Die attach Silver paste Chip AlGaInP Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.0 Device No. : DSE-A09-002 Prepared date: Nov. 27, 2007 Prepared by:ʳTerry Hsu Page: 1/10 EVERLIGHT ELECTRONICS CO.,LTD. EHP-A09/SUR31-PU5/TR Dimensions N A N N C N Package mark Notes: 1. Dimensions are in millimeters. 2. Tolerances unless dimensions ±0.25mm. Everlight Electronics Co., Ltd. Device No. : DSE-A09-002 http://www.everlight.com Prepared date: Nov. 27, 2007 Rev. 1.0 Prepared by:ʳTerry Hsu Page: 2/10 EVERLIGHT ELECTRONICS CO.,LTD. EHP-A09/SUR31-PU5/TR Maximum Ratings (T Ambient=25ºC) Parameter Symbol Rating Unit DC Operating Current IF 150 mA Pulsed Forward Current IF 300 mA ESD 2000 V Junction Temperature Tj 125 Operating Temperature Topr -40 ~ +100 °C °C Storage Temperature Tstg -40 ~ +100 °C Power Dissipation Pd 0.5 W Junction To Heat-Sink Thermal Resistance Rth 65 K/W ESD Sensitivity Electro-Optical Characteristics (TAmbient=25ºC) Parameter Bin Symbol Min Typ. Max 2800 ---- 3550 3550 ---- 4500 4500 ---- 5600 5600 ---- 7100 620 ---- 625 R6 625 ---- 630 U2 2.05 ---- 2.35 2.35 ---- 2.65 2.65 ---- 2.95 ---- 120 ---- C1 C2 Luminous Intensity(1) D1 Iv D2 R5 Wavelength(2) Forward Voltage(3) VF U4 Viewing Angle(4) ---- Condition mcd d U3 Unit 2!1/2 nm IF=150mA V deg Note. 1. Luminous Intensity measurement tolerance: ±10% 2. Wavelength measurement tolerance : ±1nm 3. Forward Voltage measurement tolerance: ±0.1V 4. 2!1/2 is the off axis angle from lamp centerline where the luminous intensity is 1/2 of the peak value. Everlight Electronics Co., Ltd. Device No. : DSE-A09-002 http://www.everlight.com Prepared date: Nov. 27, 2007 Rev. 1.0 Prepared by:ʳTerry Hsu Page: 3/10 EVERLIGHT ELECTRONICS CO.,LTD. EHP-A09/SUR31-PU5/TR Typical Electro-Optical Characteristics Curves Forward Voltage vs Forward Current, T Ambient=25ºC Relative Spectral Distribution, IF=150mA, T Ambient=25ºC 1.0 2.6 Forward Voltage (v) Relative Luiminous Intensity 2.5 0.8 0.6 0.4 0.2 2.4 2.3 2.2 2.1 2.0 1.9 1.8 0.0 400 500 600 700 0 800 50 100 Wavelength(nm) 200 250 300 Forward Current (mA) Ambient Temperature & Operating Current Derating based on TJMAX = 125к Relative Luminous Intensity vs Forward Current, T Ambient=25ºC 1.8 250 1.6 Forward Current (mA) Relative Luminous Intensity 150 1.4 1.2 1.0 0.8 0.6 0.4 200 150 100 50 0.2 0.0 0 50 100 150 200 250 300 0 Everlight Electronics Co., Ltd. Device No. : DSE-A09-002 20 40 60 80 100 120 140 160 Ambient Temperature ( C) Forward Current (mA) http://www.everlight.com Prepared date: Nov. 27, 2007 Rev. 1.0 Prepared by:ʳTerry Hsu Page: 4/10 EVERLIGHT ELECTRONICS CO.,LTD. EHP-A09/SUR31-PU5/TR Typical Representative Spatial Radiation Pattern Relative Luminous Intensity 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 -80 -60 -40 -20 0 20 40 60 80 Degree (2!) Everlight Electronics Co., Ltd. Device No. : DSE-A09-002 http://www.everlight.com Prepared date: Nov. 27, 2007 Rev. 1.0 Prepared by:ʳTerry Hsu Page: 5/10 EVERLIGHT ELECTRONICS CO.,LTD. EHP-A09/SUR31-PU5/TR Label explanation CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Domain Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place Reel Dimensions Note: 1. Dimensions are in millimeters. 2. The tolerances unless mentioned is ±0.1mm. Everlight Electronics Co., Ltd. Device No. : DSE-A09-002 http://www.everlight.com Prepared date: Nov. 27, 2007 Rev. 1.0 Prepared by:ʳTerry Hsu Page: 6/10 EVERLIGHT ELECTRONICS CO.,LTD. EHP-A09/SUR31-PU5/TR Carrier Tape Dimensions: Loaded quantity 1000 PCS per reel Package mark Note: 1. Dimensions are in millimeters. 2. The tolerances unless mentioned is ±0.1mm. Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. Device No. : DSE-A09-002 http://www.everlight.com Prepared date: Nov. 27, 2007 Desiccant Label Rev. 1.0 Prepared by:ʳTerry Hsu Page: 7/10 EVERLIGHT ELECTRONICS CO.,LTD. EHP-A09/SUR31-PU5/TR Reliability Test Items Stress Test Stress Condition Stress Duration Reflow Tsol=260°C, 10sec, 6min(total) 2 times DC Operating Life Ta=25°C , IF=150mA 1000 hours High Temperature Storage Ta=100°C 1000 hours High Temperature Operation Life #1 Ta=55°C, IF=150mA 1000 hours High Temperature Operation Life #2 Ta=85к, IF=120mA 1000hours Low Temperature Storage Ta=-40°C 1000 hours High Temperature/ Humidity Reverse Bias Ta=85к , RH=85% 1000hours High Temperature/ Humidity Operation Life Ta=85°C , RH=60%, IF=120mA 1000 hours HΚЀ100°C Temperature Cycle 300 Cycles ' 5min. 'LΚЁ40°C 15min. HΚЀ85°C Power Temperature Cycle 15min. 15min. 1000 Cycles ' 5min. 'LΚЁ40°C 15min. HΚЀ110°C! 5min. Thermal Shock 300 Cycles Pulse Test ' 10sec. 'LΚЁ40°C 5min. Ta=25к, IF=1000mA 30mS on/ 2500mS off 30000 times ESD Human Body Model 2000V, Interval:0.5sec 3 times ESD Machine Model 200V, Interval:0.5sec 3 times *lm: Brightness attenuate difference(1000hrs)І50% *VF: Forward voltage differenceІ20% Notes: All reliability items are tested under superior thermal management with 1.5 x 1.5 cm2 MCPCB. Everlight Electronics Co., Ltd. Device No. : DSE-A09-002 http://www.everlight.com Prepared date: Nov. 27, 2007 Rev. 1.0 Prepared by:ʳTerry Hsu Page: 8/10 EVERLIGHT ELECTRONICS CO.,LTD. EHP-A09/SUR31-PU5/TR Precautions For Use 1. Over-current-proof Though EHP-A09 has conducted ESD protection mechanism, customers must not use the device in reverse and should apply resistors for extra protection. Otherwise, slight voltage difference may cause enormous current shift and burn out failure would happen. 2. Storage i. Do not open the moisture proof bag before the devices are ready to use. ii. Before the package is opened, LEDs should be stored at temperature less than 30кand humidity less than 90%. iii. LEDs should be used within a year. iv. After the package is opened, LEDs should be stored at temperature less than 30кand humidity less than 70%. v. LEDs should be used within 168 hours (7 days) after the package is opened. vi. If the moisture absorbent material (silicone gel) has faded away or LEDs have exceeded the storage time, baking treatment should be implemented based on the following the conditions: pre-curing at 60±5к for 24 hours. 3. Thermal Management i. For maintaining the high flux output and achieving reliability, EHP-A09 series LEDs should be mounted on a metal core printed circuit board (MCPCB) or other kinds of heat sink with proper thermal connection to dissipate approximate 0.5W of thermal energy at 150mA operation. ii. Special thermal designs are also recommended to take in heat dissipation management, such as FR4 PCB on Aluminum with thermal vias or FPC on Aluminum with thermal conductive adhesive, etc. iii. Sufficient thermal management must be implemented. Otherwise, the junction temperature of dies might be over the limit at high current driving condition and LEDs’ lifetime might be decreases dramatically. iv. For further thermal management suggestions, please consult Everlight Design Guide or local representatives for assistance. Everlight Electronics Co., Ltd. Device No. : DSE-A09-002 http://www.everlight.com Prepared date: Nov. 27, 2007 Rev. 1.0 Prepared by:ʳTerry Hsu Page: 9/10 EVERLIGHT ELECTRONICS CO.,LTD. EHP-A09/SUR31-PU5/TR 4. Soldering Condition 4-1. For Reflow process i. EHP-A09 series are suitable for SMT process. ii. Lead reflow soldering temperature profile iii. Reflow soldering should not be done more than two times. iv. In soldering process, stress on the LEDs during heating should be avoided. v. After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No. : DSE-A09-002 http://www.everlight.com Prepared date: Nov. 27, 2007 Rev. 1.0 Prepared by:ʳTerry Hsu Page: 10/10