Single Port Connector with LEDs Intergrated Magnetics 1000 Base-T RJ-45 8341-8344 • Exceeds IEEE 802.3ab standard for 1000 Base-T • Meets OCL specifications of 350µH Min with 8mADC Bias • Contact Plating: 6µ-inch gold flashed • Available with or without LEDs MECHANICAL AND SCHEMATIC (All dimensions in inches) PCB (PHY/IC SIDE) RJ-45 Suggested PCB Layout (component side view) SCHEMATIC UNLESS OTHERWISE SPECIFIED, ALL TOLERANCES ARE ±0.010 PCB LAYOUT DIMENSIONS TO BE ±0.005 ISSUE: A 03/06/03 8341-8344 ELECTRICAL SPECIFICATION @ 25˚C Part Number LEDs 1 L/R 8341 Y-G/G Insertion Loss (dB Typ) 1-100 MHz -1.2 1-10 MHz -20 Return Loss (dB Typ) Load 100Ω ±15Ω 30 60-80 MHz MHz -16 -12 Crosstalk (dB Typ) 1-10 MHz -40 30-60 MHz -35 Common Mode Rejection (dB Typ) 60-100 MHz -30 1-50 MHz -30 50-130 MHz -20 Hi-pot (Vrms) 1mA, 1Sec 1500 8342 G/G -1.2 -20 -16 -12 -40 -35 -30 -30 -20 1500 8343 NONE -1.2 -20 -16 -12 -40 -35 -30 -30 -20 1500 8344 NONE -1.2 -20 -16 -12 -40 -35 -30 -30 -20 1500 1. LEDs Left/Right: G = Green, Y = Yellow, Y-G = Yellow-Green 229 Colonnade Road, Ottawa, Ontario, Canada K2E 7K3 Tel: (613) 226-1626 Fax: (613) 226-7124 www.filtran.com An ISO 9001 Registered Company