3.3V LOW PROFILE SMD VCXO MODEL: FVS25AXT FEATURES • • • • 3.3V Operation HCMOS Output Enable/Disable Tape and Reel (2,000 pcs. STD) • PART NUMBER SELECTION Learn More - Internet Required Learn more about: Part Marking Identification Tape and Reel Specification Internet required Frequency Operating Frequency Model Part Number Stability Temperature (ºC) Range (MHz) Number -10 ~ +70 622-Frequency-xxxxx FVS25AXT ±50 PPM1 2.000 ~ 54.000 • ELECTRICAL CHARACTERISTICS MAX (unless otherwise noted) PARAMETERS Frequency Range (FO) Temperature Range Operating (TOPR) Storage (TSTG) Frequency Stability Pullability Supply Voltage (VDD) Control Voltage (VC) Input Current (IDD) 2.000 ~ 30.000 MHz 30.000+ ~ 54.000 MHz Output Symmetry (50% VDD) Rise Time (20% ~ 80% VDD) (TR) Fall Time (80% ~ 20% VDD) (TF) Output Voltage (VOL) (VOH) Output Current (IOL) (IOH) Output Load (HCMOS) Start-up Time (TS) Enable/Disable Time 2 Frequency Linearity Modulation Bandwidth 2.000 ~ 54.000 MHz -10ºC ~ +70ºC -40ºC ~ +85ºC ±50PPM1 ±100PPM 3.3V ± 5% 1.65V ± 1.5V 15mA 25mA 40% ~ 60% 5nS 5nS 10% VDD 90% VDD Min 4.0mA Min -1.0mA Min 15pF 10mS 150nS ±10% 20 kHz 1 Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load change, aging, shock, vibration, and Vc = 1.65V. An internal pullup resistor from pin 6 to pin 5 allows active output if pin 6 is left open. Note: A 0.01µF bypass capacitor should be placed between VDD (Pin 5) and GND (Pin 2) to minimize power supply line noise. All specifications subject to change without notice. Rev. 6/1/04 2 All dimensions are in millimeters. • ENABLE / DISABLE FUNCTION INH (Pin 6) OUTPUT (Pin 4) OPEN 2 ACTIVE '1' Level VIH ≥ 70% VDD ACTIVE '0' Level VIL ≤ 30% VDD High Z 74 FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1(239)693-0099 FAX +1(239)693-1554 http://www.foxonline.com © 2004 FOX ELECTRONICS