Resistance Weld Low Profile Crystal Pb Free Model: HC49SSLF Page 1 of 1 FEATURES • • • • Rev. 2/7/2007 http://www.foxonline.com/need_a_sample.htm OPTIONS Very Low Profile Fundamental to 30 MHz "AT Strip" Standard Footprint • Mylar Spacer (Leaded) • Tape and Reel (1,000pcs. STD) • SMD Version available (HC49SSDLF) • PART NUMBER Learn More - Internet Required Part Number 279LF-Frequency-xxxxx Model Number Frequency Range (MHz) HC49SSLF 6.000 ~ 70.000 • STANDARD SPECIFICATIONS1 PARAMETERS Frequency Range Frequency Tolerance @ 25ºC Frequency Stability, ref @ 25ºC Over Operating Temp Range Temperature Range Operating (TOPR) Storage (TSTG) Shunt Capacitance (Co) Load Capacitance (CL) MAX (unless otherwise noted) 6.000 ~ 70.000 MHz ±50 PPM Drive Level 1,2 ±50 PPM 1 20ºC ~ +70ºC -40ºC ~ +85ºC 7.0 pF 10 pF ~ Series (Customer Specified) 0.5 mW 1 1 Other tolerances, stabilities & operating temperature ranges available. Consult Fox Customer Service for specific requirements. 2 Crystal has a ±50ppm tolerance specification for all standard part numbers. All specifications subject to change without notice. Frequency Range (MHz) 6.000 ~ 7.000 7.000+ ~ 9.000 9.000+ ~ 13.000 13.000+ ~ 20.000 20.000+ ~ 30.000 30.000+ ~ 70.000 FOXElectronics Operating Mode Max ESR Ω Fundamental Fundamental Fundamental Fundamental Fundamental 3rd OT 100 80 60 40 30 100 All dimensions are in millimeters. TERMINATION FINISH: Sn/3.0Ag/0.5Cu 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 http://www.foxonline.com EMEA Tel/Fax: +44 .1767.312632 | Asia Hong Kong Tel: +852.2854.4285 Fax +852.2854.4282 | Taiwan Tel: +886.2.22073427 Fax +886.2.22073486 | Japan Tel: +81.3.3374/2079 Fax: +81.3.3374.5221 © 2007 FOX ELECTRONICS | ISO9001:2000 Certified