OCXO Sine Output HCD220 Specifications Product Parameters Frequency range: Optional SMA/B/C/BNC/MCX RF connector(s) 10.00 PIN 50.00 17.00 15.90 A A Fixing holes M3 tapped. Penetration 5mm max. A Freq adjust (+ve) 2 Fine adjust 3 Freq adjust (-ve) 4 Isolated RF output 5 Isolated RF output 6 + Supply 7 DO NOT USE 8 - Supply 9 Case A 5.90 5.90 Mechanical frequency adjustment on this face Scale 1:2 Features Temperature stability down to 1ppb Twin RF outputs available Oven alarm option on D9 connector Custom options available Standard Models Freq 5.0MHz 5.0MHz 10.0MHz 10.0MHz Specification Ageing per day HCD220/DRFND HCD220/FTFND HCD220/DRFNA HCD220/FTFNA ±1x10-9 ±2x10-10 ±1x10-9 ±2x10-10 Temperature stability ±1x10-8 -20+70°C ±3x10-9 -20+70°C ±1x10-8 -20+70°C ±3x10-9 -20+70°C Part No MA05197 MA05621 MA05622 MA01842 Ordering Information Product name + option code + frequency eg: HCD220/DRFND 10.0MHz HCD220/FTFNA 5.0MHz Option code X (eg HCD220/X) denotes a custom specification. Tel: +44 1460 256 100 04 Mar 2004 Ageing per day (at despatch): < ±1x10-9 < ±2x10-10 < ±1x10-10 (<10MHz only) 쮿 쮿 왏 Frequency stability: < ±2x10-8 per year -9 < ±1x10 per 10% change in VDD < ±5x10-10 per 10% change in load 쮿 쮿 쮿 Short term stability: < ±5x10-12 over 1 sec (5.0MHz) < ±1x10-11 over 1 sec (10.0MHz) 쮿 쮿 Fax: +44 1460 256 101 Option Codes D F G < ±1x10-8 < ±5x10-9 < ±3x10-9 < ±1x10-9 쮿 왏 쮿 왏 R S T V Operating temperature range: 0 to +50°C -10 to +60°C -20 to +70°C -40 to +70°C 왏 왏 쮿 왏 A C F G Storage temperature range: -40 to +90°C 쮿 Output waveform: Sine wave, 7dBm (±1dBm) into 50⏲ Other options from 3 to +13dBm 쮿 왏 CONNECTION 1 15.90 « « « « 쮿 9 15.00 70.00 5.0 ~ 16.0MHz Temperature stability: 40.00 1 HCD220 Frequency adjustment: ±5x10-7 (typ) over +0.5 to +8V (sufficient for 10 years ageing min) Stabilised +8V supply provided Mechanical ±5x10-7 쮿 Supply voltage (VDD): +12V (±0.5V) +24V (±0.5V) Other options from 12~30V 쮿 쮿 왏 Power consumption: 5.0W max at switch on 2.0W typ when stabilised at 25°C 쮿 쮿 Warm up: < ±1x10-8 after 12mins at +25°C 쮿 Phase noise (@ 10.0MHz): < -130 dBc/Hz @ 10Hz < -140 dBc/Hz @ 100Hz < -155 dBc/Hz @ 1kHz < -158 dBc/Hz @ 10kHz < -160 dBc/Hz @ 50kHz 쮿 쮿 쮿 쮿 쮿 External connectors: D9 D9 + single SMA D9 + twin SMA Other (BNC, single or twin SMB/C/MCX) 쮿 왏 왏 왏 Harmonics: < -30dB wrt carrier 쮿 Shock: IEC 68-2-27 Test Ea 50G for 11ms 쮿 Vibration: IEC 68-2-06 Test Fc 10-55Hz, 1.5mm. 55-500Hz, 10G 쮿 쮿 쮿 Standard. 왏 Optional - Please specify required codes when ordering E-mail: [email protected] Web: www.golledge.com specify N T specify D A G specify