MBR30150CT, MBRF30150CT Dual Common-Cathode High-Voltage Schottky Barrier Rectifiers Reverse Voltage 150 Volts Forward Current 30.0 Amperes Features Guardring for overvoltage protection Low power loss, high efficiency Low forward voltage drop High frequency operation Solder Dip 260 °C, 40 seconds For use in high frequency inverters, free wheeling and polarity protection applications Mechanical Data Case: TO-220AB, ITO-220AB Epoxy meets UL-94V-0 Flammability rating Terminals: Matte Tin plated (E3 Suffix) leads, solderable per J-STD-002B and JESD22-B102D Mounting Torque: 10 in-lbs maximum Polarity: As marked Weight: 0.08 ounce, 2.24 grams TO-220AB ITO-220AB Dimensions in inches and (millimeters) 396 Maximum Ratings and Electrical Characteristics ( TC = 25oC unless otherwise noted ) Parameter Symbol MBR30150CT Unit Maximum repetitive peak reverse voltage VRRM 150 Volts Working peak reverse voltage VRWM 150 Volts V DC 150 Volts IF(AV) 30 15 Amps IFSM 260 Amps IRRM 1.0 Amp dv/dt 10,000 V/us Maximum DC blocking voltage Maximum average forward rectified current (See Fig. 1) Total device Per leg Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) per leg Peak repetitive reverse current per leg at tp = 2.0us, 1KHz Voltage rate of change (rated VR) Maximum instantaneous forward voltage per leg (Note 4) at IF=15A, TC=25oC at IF=15A, TC=125oC Maximum reverse current per leg at working peak reverse voltage 0.90 VF 0.75 at IF=30A, TC=25oC 0.99 at IF=30A, TC=125oC 0.86 TJ=25oC o 5.0 TJ=125 C 1.0 RθJC MBR 1.7 / MBRF 4.0 RMS Isolation voltage (MBRF type only) from terminals to heatsink with t = 1.0 second, RH < 30% VISOL 4500 (Note 1) 3500 (Note 2) 1500 (Note 3) TJ, TSTG -55 to +150 Notes: uA IR Typical thermal resistance per leg Operating junction and storage temperature range Volt 1. Clip mounting (on case), where lead does not overlap heatsink with 0.110" offset 2. Clip mounting (on case), where leads do overlap heatsink 3. Screw mounting with 4-40 screw, where washer diameter is < 4.9 mm (0.19") 4. Pulse test: 300us pulse width, 1% duty cycle 397 mA o C/W Volts o C RATINGS AND CHARACTERISTIC CURVES ( TA = 25oC unless otherwise noted ) 398