ISSUED DATE :2006/04/04 REVISED DATE : GQ2141 C M O S P o s i t i v e Vo l t a g e R e g u l a t o r Description The GQ2141 of positive, linear regulator feature low quiescent current (50 A typ.) with low dropout voltage and excellent PSRR, thus making them ideal for Telecommunications and other battery applications. The GQ2141’s output voltage can be adjusted with an external resister divider. These rugged devices have both Thermal Shutdown, and Current Fold-back to prevent device failure under the “Worst” of operating conditions. As an additional feature, the GQ2141 is stable with an output capacitance of just extended 0.22 F or greater. Features Very Low Dropout Voltage Guaranteed 150mA output Over-Temperature Shutdown Current Limiting Short Circuit Current Fold-back Excellent PSRR Type 70dB Power-saving Shutdown Mode Factor Pre-set Output Voltage Functional Block Diagram Applications Battery Powered Widgets Instrumentation Wireless Devices PC Peripherals Portable Electronics Cordless Phones Electronic Scales Cellular Phones Cameras Telecommunications Package Dimensions REF. A B C D E F Millimeter Min. Max. 2.70 3.10 2.60 3.00 1.40 1.80 0.30 0.55 0 0.10 0° 10° REF. G H I J K L Dimensions Millimeter 1.90 REF. 1.20 REF. 0.12 REF. 0.37 REF. 0.60 REF. 0.95 REF. Typical Application Circuit GQ2141 Page: 1/5 ISSUED DATE :2006/04/04 REVISED DATE : Absolute Maximum Ratings Parameter Symbol Ratings Unit Input Max Voltage VIN 6 V Output Current IOUT PD/( VIN- VO) mA Output Voltage VOUT GND-0.3 to VIN+0.3 V Operating Ambient Temperature Topr -40 ~ +85 Junction Temperature Maximum Junction Temperature Power Dissipation( T=100 ) Tj -40 ~ +125 Tj Max 150 PD 380 EDS Classification mW B Electrical Characteristics TA=25 unless otherwise noted (VOUT(T)>2.0V VIN=VOUT(T)+0.5V; VOUT(T) 2.0V VIN=VOUT(T)+1V; VSHDN=VIN, CIN=COUT=1uF. GQ2141 is tested with 2.45V output.) Parameter Output Voltage Current Limit Fold-back Current Load Regulation Dropout Voltage Quiescent Current Ground Pin Current Line Regulation Input Voltage Over Temperature Shutdown Over Temperature Hysterisis Output Voltage Temperature Coefficient Power Supply Rejection Output Voltage Noise SHDN Input Threshold SHDN Input Bias Current Shutdown Supply Current Shutdown Output Voltage ADJ Reference Voltage ADJ Input Bias Current Symbol Condition Min TYP Max VOUT(T) 1.5 Unit IO=0.1mA -1.5 (Note1) IO=150mA -2.0 (Note2) 2.0 ILIM IFB VO>800mV 150 200 - mA VO=0V - 80 - A VOUT>2.0V VIN=VOUT(T)+0.5V -1 0.5 1 VOUT 2.0V VIN=VOUT(T)+1V -2 VOUT (E) REGLOAD VDROPOUT IO=0.1 to 150mA IO=150mA VO=VOUT(E)-2% % % - 2 VOUT(T) 2.0V - 300 500 1.8V VOUT(T)<2.0V - 700 1000 1.5V VOUT(T)<1.8V mV - 900 1300 IQ VIN=5V, IO=0mA - 60 - A IGND VIN=5V, IO=1mA to150mA - 50 - A IO=0.1mA, VOUT>2.0V VIN=VOUT(T)+0.5V to 5.5V -0.2 0.1 0.2 IO=0.1mA, VOUT 2.0V VIN=VOUT(T)+1V to 5.5V -0.4 - 0.4 VIN OTS OTH Note3 - 5.5 - 137 - - 23 - TC - 30 - ppm/ - 70 - dB f=10Hz~100kHz, Io=10mA, Co=2.2 F - 30 - Vrms VSHDN=0.8* VIN 0.8* VIN - VIN V VSHDN=0.6V 0 - 0.6 V VIN=5V, EN=0v, or 5V - 0.01 - A VIN=5V, VO=0V - 0.5 1 A Output Loading 1200 , Vo=0V 0 - 0.4 V 1.206 1.225 1.243 V - 0.05 0.1 A REGLINE PSRR eN VSHDNH VSHDNL ISD VO,SD VREF Ro=100 ,Co=2.2mF, f=1kHz VIN=5.5V, VADJ=1.3V % V Note 1: VOUT (E) =Effective Output Voltage (i.e. the output voltage when “VOUT(T)>2.0V VIN=V OUT(T)+0.5V; V OUT(T) 2.0V V IN=VOUT(T)+1V; VSHDN=VIN” is provided at the VIN pin while maintaining a certain IOUT value). 2: VOUT (T) =Specified Output Voltage 3: VIN (MIN) =VOUT+VDROPOUT GQ2141 Page: 2/5 ISSUED DATE :2006/04/04 REVISED DATE : Ordering Information ( contd. ) Part Number GQ2141-AD Marking 1DAD2 XXXX Output Voltage Part Number Marking Output Voltage Adjustable Detailed Description The GQ2141 of COMS regulator contains a PMOS pass transistor, voltage reference, error amplifier, overcurrent protection, and thermal shutdown. The P-channel pass transistor receives data from the error amplifier, over-current shutdown, and thermal protection circuits. During normal operation, the error amplifier compares the output voltage to a precision reference. Over-current and Thermal shutdown circuits become active when the junction temperature exceeds 150 , or the current exceeds 150mA. During thermal shutdown, the output voltage remains low. Normal operation is restored when the junction temperature drops below 120 . The GQ2141 switches from voltage mode to current mode when the load exceeds the rated output current. This prevents over-stress. The GQ2141 also incorporates current fold-back to reduce power dissipation when the output is short circuited. This feature becomes active when the output drops below 0.8 volts, and reduces the current flow by 65%. Full current is restored when the voltage exceeds 0.8 volts. External Capacitors The GQ2141 is stable with an output capacitance to ground of 0.22 F or greater. Ceramic capacitors have the lowest ESR, and will offer the best AC performance. Conversely, Aluminum Electrolytic capacitors exhibit the highest ESR, resulting in the poorest AC response. A second capacitor is recommended between the input and ground to stabilize Vin. The input capacitor should be at least 1 F to have a beneficial effect. A large capacitor improves the AC ripple rejection, but also makes the output come up slowly. This “Soft” turn-on is desirable in some applications to limit turn-on surges. All capacitors should be placed in close proximity to the pins. A “Quiet” ground termination is desirable. This can be achieved with a “Star” connection. Shutdown When actively, pulled low, the PMOS pass transistor shuts off, and all internal circuits are powered down. In this state, the quiescent current is less than 1 A. This pin behaves much like an electronic switch. Adjustable Version The GQ2141 features a user-adjustable output through an external feedback resister divider. To set the output of GQ2141 use the following equation: VOUT=VADJ * (1+R1/R2) VADJ=1.225, use 1% or better resistors Characteristics Curve GQ2141 Page: 3/5 ISSUED DATE :2006/04/04 REVISED DATE : GQ2141 Page: 4/5 ISSUED DATE :2006/04/04 REVISED DATE : Important Notice: All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of GTM. GTM reserves the right to make changes to its products without notice. GTM semiconductor products are not warranted to be suitable for use in life-support Applications, or systems. GTM assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory: Taiwan: No. 17-1 Tatung Rd. Fu Kou Hsin-Chu Industrial Park, Hsin-Chu, Taiwan, R. O. C. TEL : 886-3-597-7061 FAX : 886-3-597-9220, 597-0785 China: (201203) No.255, Jang-Jiang Tsai-Lueng RD. , Pu-Dung-Hsin District, Shang-Hai City, China TEL : 86-21-5895-7671 ~ 4 FAX : 86-21-38950165 GQ2141 Page: 5/5