PHOTO IC Photo IC for optical link S7141-10 Photo IC for 50 Mbps optical link Features Applications l DC to 50 Mbps data transmission l Miniature size due to monolithic IC structure l Inversion logic l Digital output l Designed to be used with L8045 l Data transmission in FA or OA applications subject to large amounts of electro magnetic noise l High-speed, short distance data transmission l Burst data transmission ■ Absolute maximum ratings (Ta=25 °C) Parameter Symbol Value Power supply Vcc -0.5 to +7 Output current Ioh 10 Power dissipation *1 P 250 Operating temperature Topr -10 to +70 Storage temperature Tstg -40 to +85 Soldering 230 °C, 5 s, at least 1.5 mm away from package surface *1: Derate power dissipation at a rate of 1.75 mW /°C above Ta=25 °C Unit V mA mW °C °C - ■ Electrical and optical characteristics (Ta=25 °C) Parameter Data rate Supply voltage Current consumption Pulse width distortion Minimum overload Minimum receiver input power Rise time Fall time Symbol Condition Min. Typ. Max. fD DC 50 Vcc 4.75 5.25 Icc Without light input 32 -6 +6 ∆T Pimax *2, *3 -5 Pimin *2, *3 -17.5 tr *3 7 tf *3 7 Voh Ioh=20 µA 2 Output voltage 1 Vol Iol= -0.6 mA *4 *2: Output from a 1 meter long plastic fiber (GH4001 made by Mitsubishi Rayon) set close to the molded lens. *3: Evaluated based on the input/output waveforms shown below. Measured with a low-capacitance FET probe (3 pF *4: Output is the “L” level (inversion logic) when light is input. ■ Input optical waveform definition pw1 80 % 1.5 V 20 % 1.2 V tf=5 ns or less). ■ Output optical waveform definition ■ S7141-10 output waveform example (Input light is referenced by drive circuit on front page) 1.8 V (Ta=25 °C, Pi= -16 dBm, Vcc=5.0 V) 50 % tr=2 ns Unit Mbps V mA ns dBm dBm ns ns V V tr tf pw ∆T = pw1 - pw KPICC0022EA KPICC0023EB 5 ns/div. KPICC0068EA 1 Photo IC for optical link S7141-10 ■ Dimensional outline (unit: mm) 1.77 5.2 ± 0.3 (INCLUDING BURR) 5.0 0.97 0.4 10˚ 4.3 1.8 10˚ (0.9) 4.5 ± 0.3 (INCLUDING BURR) 4.3 6.6 ± 0.4 0.5 A (1.5) (2.15) 1.4 0.69 0.25 1.27 1.27 1.27 (0.9) 0.66 1.8 (0.9) 10˚ 1.24 0.2 (SPECIFIED AT THE LEAD ROOT) 0.25 Surface B Detail of part A 10˚ 5.0 GND OUT GND Vcc Lens tip does not project over surface B. Tolerance unless otherwise noted: ±0.1, ±2˚ Shaded area indicates burr. Values in parentheses indicate reference value. KPICA0043EE Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2006 Hamamatsu Photonics K.K. HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, www.hamamatsu.com U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 2 Cat. No. KPIC1039E06 Jun. 2006 DN