HDM 240192 240 X 192 Dots Graphic, Very Thin Dimensional Drawing 122.0±1.0 102.5 99.5 88.37 (Viewing Area) 86.37±0.1 (Active Area) 7.0 7.0 0.33 0.03 0.03 0.33 85.0 92.0±1.0 82.0 20.0 69.09±0.1 (Active Area) 71.09 (Viewing Area) 1.0 79.0 36.0 14.0 1.0 CONNECTOR INFORMATION: MOLEX 53261-1590 PLUG MATING: MOLEX 51021-1500, TERMINAL 50058-8100 57.6 111.8 119.0 Dimension tolerance: +/-0.3mm 6.0 MAX Features Features Backlight...........................................................................None Options....................................Gray STN / Yellow STN / FSTN Normal/Extended Temperature Bottom / Top Viewing Built-in Controller.............................................................None Absolute Maximum Ratings PARAMETER SYMBOL MIN MAX VDD-VSS -0.3 6.0 V INPUT VOLTAGE VDD-V6 0 30.0 V OPERATING TEMPERATURE TOP 0 50 °C STORAGE TEMPERATURE TSTG -20 70 °C Physical Data Module Size...................................122.0W x 92.0H x 6.0T mm Viewing Area Size...................................88.37W x 71.09H mm Dot Pitch.....................................................0.36W x 0.36H mm Dot Size......................................................0.33W x 0.33H mm Weight.................................................................................42g Power Supply VDD + RH L C M 5V VLCD VSS + RL VL 20V Pin Connections VEE RH+RL = 10 ~ 20KΩ Electrical Characteristics (VDD=5.0±0.25V 25°C) PARAMETER OPERATING VOLTAGE SYM CONDITION VDD - LCD VOLTAGE VEE - POWER SUPPLY FOR LCD VDD-VL - VIH - INPUT LOW VOLTAGE VIL OUTPUT HIGH VOLTAGE VOH OUTPUT LOW VOLTAGE INPUT HIGH VOLTAGE MIN 4.75 TYP 5.0 5.25 -15 19.2 20.2 VDD -2.2 - - 0 IOH=0.2mA VDD -0.4 VOL IOL=1.2mA POWER SUPPLY CURRENT IDD LCD CURRENT ILCD DRIVE METHOD MAX PIN NO. SYMBOL 1 FLM H First line marker FUNCTION 2 CL1 H,H→L Display data latch clock UNIT 3 CL2 H,H→L Display data shift clock V 4 DOFF L Display off 5 VDD 5V Power supply for logic 6 VSS 0V Ground 7 VL -12.7v LCD Voltage 8 DB0 H/L V 20.7 V VDD V - 0.8 V 9 DB1 H/L - VDD V 10 DB2 H/L 11 DB3 H/L 0 - 0.4 V 12 VEE -20V Power Supply for LCD VDD=5.0V - 3.5 - mA 13 M H/L AC driving control signal VL=-12.7V - 2.0 - mA 14 N/C No Connection 15 N/C No Connection 1/192 Duty UNIT SUPPLY VOLTAGE Page 27 Data bus