HDM3224-6 320 X 240 Dots Graphic CCFL Backlight Dimensional Drawing 10.1±0.5(EL) 11.7±0.5(LED, CCFL) 143.0 4-Ø3.4 81.0 44.0 58.0 13.0 P1.0*13 0.27 0.03 0.03 1 88.0 94.8 HOT GND 71.97 80.0 14 96.8±0.5 0.27 5.9(EL) 8.0 (LED, CCFL) JST VHR-3N 95.97 105.0 126.0 135.0 143.0±0.5 1.2 15.0 4.5 4.0 CONNECTOR INFORMATION: HIROSE FH10-14S-1SH 67.0 Dimension tolerance: +/-0.3mm Features Features Backlight......................................................EL, LED or CCFL Options........................................STN/Black and White FSTN Built-in Controller............................................................None Physical Data Module Size................................143.0W x 96.8H x 12.0T mm Viewing Area Size...................................105.0W x 80.0H mm Dot Pitch....................................................0.30W x 0.30H mm Dot Size.....................................................0.27W x 0.27H mm Weight..............................................................................220g Absolute Maximum Ratings PARAMETER SYMBOL MIN MAX UNIT SUPPLY VOLTAGE VDD-VSS 0 7.0 V SUPPLY VOLTAGE FOR LCD VDD-VEE 0 28.5 V INPUT VOLTAGE VIN - 7.0 V OPERATING TEMPERATURE TOP 0 50 °C STORAGE TEMPERATURE TSTG -20 70 °C CCFL OPERATING VOLTAGE VFL - 1500 Vrms CCFL OPERATING CURRENT IFL - 10 mA CCFL OPERATING FREQUENCY fFL 20 80 KhZ Power Supply VDD + RH L C M 5V VLCD VSS Electrical Characteristics (VDD=5.0±0.25V 25°C) VL + RL 24V VEE CONDITION MIN TYP MAX INPUT HIGH VOLTAGE PARAMETER VIH SYM - 0.7 VDD - - V INPUT LOW VOLTAGE VIL - - - 0.3 VDD V OUTPUT HIGH VOLTAGE VOH IOH=0.4mA VDD -0.4 - - V OUTPUT LOW VOLTAGE VOL IOL=0.4mA - - 0.4 V VDD - 4.5 5.0 5.5 V -VEE - 20.4 20.9 21.5 V IDD VDD=5.0V - 8.0 16 mA -IEE VEE=-18.5V - 7.0 14.0 mA POWER SUPPLY FOR LCD VDD-VL TA=25°C - 25.9 - V CCFL OPERATING VOLTAGE VFL IFL=5mArms - 300 - Vrms CCFL OPERATING CURRENT IFL VFL=300Vrm s - 5.0 - mArms CCFL OPERATING FREQ. fFL - 25 45 - kHz FRAME FREQUENCY fFP - 65 72 80 Hz BRIGHTNESS L IFL=5mArms 40 55 - cd/m2 RH+RL = 10 ~ 20KΩ Pin Connections PIN NO. SYMBOL FUNCTION 1 FLM H/L Frame signal 2 M - Alternate signal 3 LP H/H→L Data latch signal 4 XSCL H/H→L Serial shift clock 5 DISPOFF L Display off 6 DB0 H/L 7 DB1 H/L Data bus 8 DB2 H/L 9 DB3 H/L 10 VDD 5V Power supply for logic 11 VSS 0V Ground 12 VEE - Power supply voltage for LC 13 VL - Operating voltage for LC 14 FG - Frame ground SUPPLY VOLTAGE POWER SUPPLY CURRENT DRIVE METHOD Page 29 1/240 DUTY UNIT