BACKLIGHT FOR LCD TECHNICAL DATA (1999.2.22) Dia. 2.9 110+/-0.5 3.5 CN1 1 6 4 1 CN2 3.5 MAX13 15 3.5 6.0+/-0.3 3.5 1)Very small,very thin and low power consumption design . 2)Adaptable with a variety of secondary batteries(7-19V) . 3)Can be changed two max dimmable modes by outer signal . 4)Backlight ON or OFF can be controlled by outer signal . 5)Dimmable from 100% down to 50% using a variable resistor . GND PATTERN Dia. 6.0 10 103+/-0.3 MAX22.0 Type Input Voltage[V] INVC444 unit ：(mm) Input Current(A) Output current(mA) (Vin=12V,at dimming MAX) 7-19 0.36typ 6.0 typ 0.31typ 5.0 typ MAX2.0 MAX5.0 1.0 MIN 7.0 MAX2.7 MAX6.5 Dia. 2.9 Suitable LCM LMG9200 LMG9300 LMG9400 LMG9600 (HITACHI) ·Max dimming mode control Lamp current mode 5.0mA typ 6.0mA typ Mode change-over signal open Low (Low,VoL=0.8V MAX) CN1 1 LCM of Mode Lamp ON Lamp OFF Low open Maker Input connector HIROSE Output connector MITSUMI 2 inverter HITACHI CN2 1 INVC444 6 Vcc(7-19) GND ON/OFF signal variable resistor 10k 0 :Brightness Max 10k :Brightness Min Mode change-over signal Type User’s connector housing DF13-6P-1.25H M60-04-301-134P DF13-6S-1.25C M60-04