HMC219MS8 / 219MS8E v03.0505 MIXERS - SMT 7 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz Typical Applications Features The HMC219MS8 / HMC219MS8E is ideal for: Ultra Small Package: MSOP8 • UNII & HiperLAN Conversion Loss: 8.5 dB • ISM LO / RF Isolation: 25 dB • Microwave Radios Functional Diagram General Description The HMC219MS8 & HMC219MS8E are ultra miniature double-balanced mixers in 8 lead plastic surface mount packages (MSOP). This passive MMIC mixer is constructed of GaAs Schottky diodes and novel planar transformer baluns on the chip. The device can be used as an upconverter, downconverter, bi-phase (de)modulator, or phase comparator. The consistent MMIC performance will improve system operation and assure regulatory compliance. Electrical Specifications, TA = +25° C, As a Function of LO Drive LO = +13 dBm IF = 100 MHz Parameter Min. 7 - 90 Typ. LO = +11 dBm IF = 100 MHz Max. Min. Typ. Units Max. Frequency Range, RF & LO 4.5 - 9.0 4.5 - 8.6 GHz Frequency Range, IF DC - 2.5 DC - 2.5 GHz Conversion Loss 8.5 10 8.5 10 dB Noise Figure (SSB) 8.5 10 8.5 10 dB LO to RF Isolation 17 25 20 25 dB LO to IF Isolation 17 25 20 25 dB IP3 (Input) 15 21 15 21 dBm 1 dB Gain Compression (Input) 7 10 5 8 dBm For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC219MS8 / 219MS8E v03.0505 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz Conversion Loss vs Temperature @ LO = +13 dBm Isolation @ LO = +13 dBm 0 -10 -5 -10 -40 C +25 C +85 C -15 7 -20 -30 -40 RF/IF LO/IF LO/RF -50 -20 -60 4 5 6 7 8 9 10 4 5 6 FREQUENCY (GHz) Conversion Loss vs. LO Drive 9 10 0 -5 -5 RETURN LOSS (dB) CONVERSION LOSS (dB) 8 Return Loss @ LO = +13 dBm 0 -10 +9 dBm +11 dBm +13 dBm +15 dBm -15 -10 -15 RF IF LO -20 -20 -25 4 5 6 7 8 9 10 0 1 2 FREQUENCY (GHz) 3 4 5 6 7 8 9 10 FREQUENCY (GHz) P1dB vs. Temperature LO = +13 dBm IF Bandwidth @ LO = +13 dBm 12.5 0 12 -40 C +25 C +85 C -5 11.5 P1dB (dBm) CONVERSION LOSS (dB) 7 FREQUENCY (GHz) MIXERS - SMT ISOLATION (dB) CONVERSION LOSS (dB) 0 -10 -15 11 10.5 10 -20 9.5 -25 9 0 0.5 1 1.5 2 2.5 IF FREQUENCY (GHz) 3 3.5 4 4 5 6 7 8 9 10 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 91 HMC219MS8 / 219MS8E v03.0505 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz Input IP3 vs. Temperature @ LO = +13 dBm Input IP3 vs. LO Drive 24 THIRD ORDER INTERCEPT (dBm) 26 24 22 +11 dBm +13 dBm +15 dBm 20 18 23 22 21 20 19 -40 C +25 C +85 C 18 17 4 5 6 7 8 9 4 10 5 LO FREQUENCY (GHz) 7 8 9 10 9 10 Input IP2 vs. Temperature @ LO = +13 dBm 55 SECOND ORDER INTERCEPT (dBm) 55 50 +11 dBm +13 dBm +15 dBm 45 40 35 30 25 50 -40 C +25 C +85 C 45 40 35 30 4 5 6 7 8 9 10 4 5 LO FREQUENCY (GHz) 0 1 0 xx 12.2 1 13.2 0 2 79.8 53.7 3 >105 4 >105 7 8 Harmonics of LO nLO mRF 6 LO FREQUENCY (GHz) MxN Spurious Outputs nLO Spur at RF Port LO Freq. (GHz) 1 2 33.9 4.0 33 49.5 5.0 31 55.4 68.1 6.0 35 78.1 65.5 83.1 7.0 31 26 53 xx >105 98.1 87.1 8.0 27 32 54 xx 9.0 21 43 xx xx 2 3 4 22.3 20.7 36.9 36.7 47.7 >105 >105 RF = 6 GHz @ -10 dBm LO = 6.1 GHz @ +13 dBm All values in dBc below the IF power level (-1RF + 1LO). 7 - 92 6 LO FREQUENCY (GHz) Input IP2 vs. Drive SECOND ORDER INTERCEPT (dBm) MIXERS - SMT 7 THIRD ORDER INTERCEPT (dBm) 28 3 4 29 39 54 23 34 47 21 40 55 LO = +13 dBm Values in dBc below input LO level measured at the RF port. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC219MS8 / 219MS8E v03.0505 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz Absolute Maximum Ratings RF / IF Input +13 dBm LO Drive +27 dBm Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 7 MIXERS - SMT Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC219MS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC219MS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H219 XXXX [2] H219 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 93 HMC219MS8 / 219MS8E v03.0505 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz Evaluation Circuit Board MIXERS - SMT 7 List of Materials for Evaluation PCB 103350 Item Description J1 - J3 PCB Mount SMA RF Connector U1 HMC219MS8 / HMC219MS8E Mixer PCB [2] 101650 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 7 - 94 [1] The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC219MS8 / 219MS8E v03.0505 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz Notes: MIXERS - SMT 7 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 95