AGILENT AMMC-6241-W10

Agilent AMMC-6241
26–43 GHz Low Noise Amplifier
Data Sheet
Features
• Wide frequency range: 26 - 43 GHz
• High gain: 20 dB
• Low 50 Ω Noise Figure: 2.7 dB
Chip Size: 1900 x 800 µm (74.8 x 31.5 mils)
Chip Size Tolerance: ± 10 µm (± 0.4 mils)
Chip Thickness: 100 ± 10 µm (4 ± 0.4 mils)
RF Pad Dimensions: 110 x 90 µm (4.3 x 3.5 mils)
DC Pad Dimensions: 100 x 100 µm (3.9 x 3.9 mils)
Description
• 50 Ω Input and Output Match
• Flat Gain Response
• Single 3V Supply Bias
Applications
• Microwave Radio systems
Agilent’s AMMC-6241 is a high
gain, low-noise amplifier that
operates from 26 GHz to 43
GHz. This LNA provides a
wide-band solution for system
design since it covers several
bands, thus, reduces part
inventory. The device has
input / output match to 50
Ohm, is unconditionally stable
and can be used as either
primary or sub-sequential low
noise gain stage. By
eliminating the complex tuning
and assembly processes
typically required by hybrid
(discrete-FET) amplifiers, the
AMMC-6241 is a cost-effective
alternative in the 26 - 43 GHz
communications receivers. The
backside of the chip is both
RF and DC ground. This helps
simplify the assembly process
and reduces assembly related
performance variations and
costs. It is fabricated in a
PHEMT process to provide
exceptional noise and gain
performance. For improved
reliability and moisture
protection, the die is
passivated at the active areas.
• Satellite VSAT, DBS Up/Down
Link
• LMDS & Pt-Pt mmW Long Haul
• Broadband Wireless Access
(including 802.16 and 802.20
WiMax)
• WLL and MMDS loops
• Commercial Grade Military
AMMC-6241 Absolute Maximum Ratings[1]
Symbol Parameters/Conditions
Units
Min.
Vd
Positive Drain Voltage
V
7
Vg
Gate Supply Voltage
V
NA
Id
Drain Current
mA
100
Pin
CW Input Power
dBm
15
Tch
Operating Channel Temp.
°C
+150
Tstg
Storage Case Temp.
°C
Tmax
Maximum Assembly Temp (60 sec max) °C
-65
Max.
+150
+300
Note: Operation in excess of any one of these conditions may result in permanent damage to this device.
Note: These devices are ESD sensitive. The following precautions are strongly recommended. Ensure that an ESD approved
carrier is used when dice are transported from one destination to another. Personal grounding is to be worn at all times when
handling these devices. For more details, refer to Agilent Application Note A004R: Electrostatic Discharge Damage and Control.
ESD Machine Model (Class A)
ESD Human Body Model (Class 0)
AMMC-6241 DC Specifications/Physical Properties [1]
Symbol
Parameters and Test Conditions
Units Min. Typ.
Max.
Id
Drain Supply Current (under any RF power drive and temperature) (V d=3.0 V)
mA
60
80
°C/W
25
θch-b
[2]
Thermal Resistance (Backside temperature, Tb = 25°C)
Notes:
1. Ambient operational temperature TA=25°C unless otherwise noted.
2. Channel-to-backside Thermal Resistance (qch-b) = 26°C/W at Tchannel (T c) = 34°C as measured using infrared microscopy. Thermal Resistance at
backside temperature (Tb) = 25°C calculated from measured data.
AMMC-6241 RF Specifications [3, 4, 5]
TA= 25°C, Vd=3.0 V, Id(Q)=60 mA, Zin=Zo=50 Ω
Symbol
Parameters and Test Conditions
[6]
Units Minimum
Typical
Maximum
Gain
Small-signal Gain
NF
Noise Figure into 50 Ω
dB
26-37 GHz = 2.7
37-40 GHz = 3.0
P-1dB
Output Power at 1dB Gain
Compression
dBm
+10
OIP3
Third Order Intercept Point;
∆f=100MHz; Pin=-35dBm
dBm
+20
RLin
Input Return Loss[6]
dB
RLout
Output Return Loss[6]
Isol
Reverse Isolation[6]
dB
Sigma
26-35 GHz = 20
26-37 GHz = 21
35-40 GHz = 18.5 37-40 GHz = 19.5
1.0
26-37 GHz = 3.0
37-40 GHz = 3.3
0.05
-13
-11
0.40
dB
-16
-12
0.50
dB
-40
0.50
Notes:
3. Small/Large -signal data measured in wafer form TA = 25°C.
4. 100% on-wafer RF test is done at frequency =30, 32, and 38 GHz.
5. Specifications are derived from measurements in a 50 Ω test environment. Aspects of the amplifier performance may be improved over a more
narrow bandwidth by application of additional conjugate, linearity, or low noise (Gopt) matching.
6. As derived from measured s-parameters
USL
2.6
2.7
Noise Figure at 32 GHz
2.8
2.9
USL
LSL
19
Gain at 38 GHz
20
2.8
2.9
3
3.1
3.2
Noise Figure at 38GHz
Typical distribution of Small Signal Gain, Noise Figure, and Return Loss. Based on 1500 part sampled over several
production lots.
2
3.3
AMMC-6241 Typical Performances
(TA = 25°C, Vd1 = Vd2 =3.0 V, Itotal = 60 mA, Zin = Zout = 50 Ω unless otherwise stated)
NOTE: These measurements are in a 50 Ω test environment. Aspects of the amplifier performance may be improved over
a narrower bandwidth by application of additional conjugate, linearity, or low noise (Gopt) matching.
25
0
0
-10
20
-5
10
-30
S11 (dB)
15
S12 (dB)
S21 (dB)
-20
-10
-40
-50
-15
5
-60
-70
0
25
29
33
37
41
Frequency (GHz)
Figure 1. Typical Gain
29
33
37
41
Frequency (GHz)
-20
45
25
Figure 2. Typical Isolation
25
-5
3.0
20
-10
2.5
-20
OIP3 & OP1dB (dBm)
3.5
-15
29
33
37
Frequency (GHz)
41
45
Figure 3 Typical Input Return Loss
0
NF (dB)
S22 (dB)
25
45
2.0
1.5
15
10
OIP3
5
OP-1dB
-25
25
29
33
37
41
Frequency (GHz)
45
0
1.0
26
28
30 32 34 36
Frequency (GHz)
-20
-40
-10
-60
0
25
29
33
37
Frequency (GHz)
Figure 7. Gain Over Temperature
41
45
25C
-40C
+85C
-5
10
25C
-40C
+85C
43
S11 (dB)
S12 (dB)
20
5
35
39
Frequency (GHz)
0
25C
-40C
+85C
25
15
31
Figure 6. Typical Output P-1dB and 3rd Order
Intercept Point.
0
30
S21 (dB)
27
40
Figure 5. Typical Noise Figure into a 50 Ω
load.
Figure 4. Typical Output Return Loss
3
38
-15
-80
25
29
33
37
41
Frequency (GHz)
Figure 8. Isolation Over Temperature
45
-20
25
29
33
37
Frequency (GHz)
41
Figure 9. Input Return Loss Over Temperature
45
AMMC-6241 Typical Performances
(TA = 25°C, Vd1= Vd2 =3.0 V, Itotal =60 mA, Zin = Zout = 50 Ω unless otherwise stated)
NOTE: These measurements are in a 50 Ω test environment. Aspects of the amplifier performance may be improved over
a narrower bandwidth by application of additional conjugate, linearity, or low noise (Gopt) matching.
0
4.5
25C
-40C
+85C
4.0
3.5
NF (dB)
-15
3.0
2.5
-20
2.0
-25
1.5
-30
25
1.0
29
33
37
41
Frequency (GHz)
S12 (dB)
S21 (dB)
10
3V
4V
5V
5
25
30
35
40
Frequency (GHz)
Figure 13. Gain over Vdd
30
35
40
Frequency (GHz)
24
OIP3 (dBm)
-10
-15
19
14
-20
3V
4V
5V
9
-25
25
30
35
40
Frequency (GHz)
Figure 16. Output RL Over Vdd
45
3V
4V
5V
-10
4
27
31
35
39
Frequency (GHz)
Figure 17. Output IP3 Over Vdd
-20
25
30
35
40
Frequency (GHz)
Figure 15. Input RL Over Vdd
29
-5
4
45
Figure 14. Isolation Over Vdd
3V
4V
5V
5
-15
25
0
S22 (dB)
-40
-80
45
4.5
-5
-60
0
4
Vdd (V)
0
3V
4V
5V
-20
15
3.5
Figure 12. Typical Total Idd over Temperature
0
20
-40C
+25C
+85C
3
Figure 11. Noise Figure Over Temperature
25
60
56
26 28 30 32 34 36 38 40
Frequency (GHz)
45
Figure 10. Output Return Loss Over
Temperature
62
58
S11 (dB)
S22 (dB)
-10
64
Idd (mA)
-5
66
+25C
-40C
+85C
43
45
AMMC-6241 Typical Scattering Parameters[1] (Tc=25°C, VD1=VD2= 3 V, Itotal= 60 mA ,Zin = Zout = 50 Ω)
Note: Data obtained from on-wafer measurements
Freq GHz
15.0
17.0
19.0
22.0
24.0
25.0
26.0
26.5
27.0
27.5
28.0
28.5
29.0
29.5
30.0
30.5
31.0
31.5
32.0
32.5
33.0
33.5
34.0
34.5
35.0
35.5
36.0
36.5
37.0
37.5
38.0
38.5
39.0
39.5
40.0
40.5
41.0
41.5
S11
dB
-1.013
-1.306
-1.528
-2.642
-5.557
-8.397
-11.117
-11.627
-11.731
-11.805
-11.787
-12.038
-12.076
-12.070
-12.259
-12.339
-12.699
-12.988
-13.131
-13.159
-13.040
-12.824
-12.498
-12.573
-12.710
-12.792
-13.029
-13.389
-13.752
-13.599
-13.511
-13.392
-13.449
-13.713
-13.892
-13.822
-13.857
-13.578
Mag
0.890
0.860
0.839
0.738
0.527
0.380
0.278
0.262
0.259
0.257
0.257
0.250
0.249
0.249
0.244
0.242
0.232
0.224
0.221
0.220
0.223
0.228
0.237
0.235
0.231
0.229
0.223
0.214
0.205
0.209
0.211
0.214
0.213
0.206
0.202
0.204
0.203
0.209
Phase
173.506
152.019
127.230
74.942
13.805
-29.421
-81.009
-106.817
-129.432
-149.942
-165.515
-176.581
173.456
165.646
159.454
154.710
150.567
148.382
146.592
145.349
145.137
143.097
140.155
138.158
134.590
131.388
130.988
129.322
130.820
130.535
131.737
130.598
130.777
130.341
130.693
131.722
133.603
134.336
S21
dB
-7.637
5.022
9.344
15.740
19.561
20.760
21.155
21.214
21.239
21.203
21.113
21.023
21.060
21.058
21.007
21.043
21.040
21.078
21.104
21.192
21.308
21.302
21.296
21.182
21.024
20.813
20.678
20.494
20.310
20.239
20.142
19.955
19.742
19.463
19.274
19.016
18.830
18.631
Mag
0.415
1.783
2.932
6.123
9.507
10.915
11.422
11.501
11.533
11.485
11.367
11.250
11.297
11.296
11.229
11.276
11.272
11.322
11.355
11.471
11.625
11.617
11.609
11.458
11.251
10.981
10.811
10.585
10.364
10.279
10.165
9.948
9.708
9.400
9.198
8.929
8.740
8.542
Phase
-94.306
163.635
75.144
-29.058
-103.326
-143.267
178.829
160.796
143.152
126.214
110.350
95.138
80.037
65.449
51.326
37.629
23.753
10.265
-3.075
-16.397
-30.578
-44.533
-58.173
-72.363
-85.797
-98.385
-111.390
-123.674
-136.026
-147.683
-160.235
-172.253
175.463
164.088
152.397
141.026
129.648
118.871
S12
dB
-59.891
-74.194
-58.181
-71.353
-69.197
-73.597
-69.288
-58.793
-59.928
-58.475
-58.768
-57.465
-57.267
-55.391
-52.903
-55.427
-55.992
-53.178
-61.593
-56.515
-58.069
-54.981
-56.012
-54.348
-55.336
-57.651
-54.494
-54.425
-52.515
-52.954
-52.864
-53.785
-51.373
-54.373
-56.900
-60.282
-54.278
-51.010
Mag
0.001
0.000
0.001
0.000
0.000
0.000
0.000
0.001
0.001
0.001
0.001
0.001
0.001
0.002
0.002
0.002
0.002
0.002
0.001
0.001
0.001
0.002
0.002
0.002
0.002
0.001
0.002
0.002
0.002
0.002
0.002
0.002
0.003
0.002
0.001
0.001
0.002
0.003
Phase
132.755
57.784
46.460
-129.404
139.800
-65.707
169.237
-110.455
-142.525
-171.775
-162.445
158.458
169.607
168.814
134.843
92.750
109.517
109.357
76.010
131.534
100.560
85.525
113.052
84.952
50.316
106.642
104.628
83.500
90.790
67.823
57.307
81.931
54.256
53.324
27.630
22.819
32.324
-8.926
S22
dB
-10.443
-14.828
-20.040
-27.825
-28.011
-24.449
-23.448
-22.500
-22.260
-21.694
-21.715
-21.674
-21.093
-21.180
-21.033
-19.948
-19.390
-18.631
-18.449
-18.461
-17.807
-18.223
-18.033
-17.550
-17.667
-17.466
-17.225
-16.978
-17.004
-16.551
-16.813
-17.019
-17.453
-17.967
-18.409
-18.887
-19.364
-19.483
Mag
0.301
0.181
0.100
0.041
0.040
0.060
0.067
0.075
0.077
0.082
0.082
0.082
0.088
0.087
0.089
0.101
0.107
0.117
0.120
0.119
0.129
0.123
0.125
0.133
0.131
0.134
0.138
0.142
0.141
0.149
0.144
0.141
0.134
0.126
0.120
0.114
0.108
0.106
Phase
129.202
102.094
80.180
4.390
-90.859
-110.024
-127.918
-137.132
-143.296
-148.929
-157.855
-156.390
-165.820
-168.128
-165.016
-169.860
-174.803
-177.679
173.486
168.589
164.643
157.797
155.542
150.830
145.841
143.100
137.833
131.310
127.335
120.618
113.724
107.173
100.864
97.791
94.365
92.964
92.290
92.508
42.0
42.5
43.0
44.0
45.0
46.0
47.0
48.0
49.0
50.0
-13.775
-13.188
-13.131
-11.798
-10.167
-8.784
-7.425
-6.079
-4.403
-2.878
0.205
0.219
0.221
0.257
0.310
0.364
0.425
0.497
0.602
0.718
136.724
139.343
142.382
146.033
147.240
144.663
139.414
135.513
128.030
120.056
18.429
18.218
18.030
17.887
17.877
17.791
17.680
17.700
17.793
17.615
8.346
8.145
7.970
7.841
7.831
7.755
7.656
7.673
7.756
7.599
107.881
97.768
87.333
67.235
45.991
24.481
2.691
-19.090
-43.456
-66.790
-54.346
-52.144
-58.236
-59.155
-52.882
-52.831
-50.765
-53.926
-52.746
-49.370
0.002
0.002
0.001
0.001
0.002
0.002
0.003
0.002
0.002
0.003
41.468
19.887
-38.809
-43.306
162.395
-14.230
-17.966
-12.616
110.943
18.237
-19.835
-19.299
-19.365
-17.525
-17.185
-17.248
-16.593
-15.788
-15.204
-14.953
0.102
0.108
0.108
0.133
0.138
0.137
0.148
0.162
0.174
0.179
94.045
94.187
93.694
90.759
81.030
74.975
69.936
60.992
57.597
47.450
5
Ω)
AMMC-6241 Typical Scattering Parameters[1] (Tc=25°C, VD1=VD2= 5 V, Itotal= 65 mA, Zin = Zout = 50 Ω
Note: Data obtained from on-wafer measurements
Freq GHz
15.0
17.0
19.0
22.0
24.0
25.0
26.0
26.5
27.0
27.5
28.0
28.5
29.0
29.5
30.0
30.5
31.0
31.5
32.0
32.5
33.0
33.5
34.0
34.5
35.0
35.5
36.0
36.5
37.0
37.5
38.0
38.5
39.0
39.5
40.0
40.5
41.0
41.5
42.0
42.5
43.0
44.0
45.0
46.0
47.0
48.0
49.0
50.0
6
S11
dB
-0.954
-1.228
-1.693
-4.463
-10.804
-15.616
-15.749
-14.388
-13.469
-12.672
-12.138
-11.933
-11.570
-11.350
-11.555
-11.254
-11.283
-11.322
-11.104
-10.807
-10.496
-10.547
-10.404
-10.415
-10.362
-10.429
-10.496
-10.552
-10.420
-10.278
-10.279
-10.249
-10.210
-10.178
-10.306
-10.258
-10.127
-10.264
-10.032
-10.283
-10.126
-10.167
-9.783
-9.264
-8.307
-7.300
-5.323
-2.732
Mag
0.896
0.868
0.823
0.598
0.288
0.166
0.163
0.191
0.212
0.232
0.247
0.253
0.264
0.271
0.264
0.274
0.273
0.272
0.278
0.288
0.299
0.297
0.302
0.301
0.303
0.301
0.299
0.297
0.301
0.306
0.306
0.307
0.309
0.310
0.305
0.307
0.312
0.307
0.315
0.306
0.312
0.310
0.324
0.344
0.384
0.432
0.542
0.730
Phase
175.370
153.538
127.796
72.488
7.846
-49.454
-118.695
-142.095
-157.405
-168.987
-179.012
175.281
168.288
163.120
160.007
157.772
155.500
152.983
151.391
149.758
147.850
145.153
143.126
140.889
138.559
136.295
134.946
133.658
132.618
132.713
130.938
128.628
128.373
126.565
125.591
125.375
124.344
124.574
123.150
124.307
121.899
124.109
125.766
127.464
129.119
129.338
131.169
130.750
S21
dB
-8.236
4.910
9.038
14.671
17.336
17.926
18.185
18.195
18.134
18.081
18.015
17.898
17.844
17.735
17.591
17.515
17.405
17.327
17.244
17.048
16.850
16.638
16.371
16.064
15.807
15.574
15.279
15.017
14.810
14.595
14.400
14.210
14.060
13.885
13.784
13.652
13.606
13.621
13.524
13.509
13.579
13.792
14.185
14.828
15.605
16.576
17.761
18.988
Mag
0.387
1.760
2.831
5.415
7.359
7.876
8.114
8.123
8.067
8.018
7.957
7.850
7.802
7.704
7.578
7.512
7.417
7.351
7.281
7.118
6.959
6.790
6.585
6.356
6.171
6.008
5.807
5.635
5.502
5.367
5.248
5.134
5.047
4.946
4.889
4.815
4.790
4.798
4.745
4.736
4.775
4.893
5.120
5.513
6.029
6.742
7.727
8.900
Phase
-97.484
149.468
54.112
-60.910
-139.132
-177.892
145.637
127.785
111.019
94.474
78.323
63.047
47.754
32.835
18.567
4.174
-9.721
-23.446
-37.449
-51.248
-64.998
-78.200
-91.518
-103.678
-115.864
-127.653
-138.958
-150.079
-161.113
-171.710
177.346
167.047
156.768
147.006
137.311
127.521
117.909
107.923
98.584
89.573
80.311
61.548
42.684
23.764
3.192
-18.746
-44.350
-72.015
S12
dB
-58.789
-58.503
-64.600
-64.010
-64.039
-63.440
-66.326
-60.997
-63.857
-62.998
-58.768
-60.915
-63.581
-62.100
-60.126
-60.519
-56.518
-56.438
-60.113
-62.866
-60.915
-64.266
-55.886
-58.954
-56.036
-59.955
-54.224
-65.294
-57.283
-54.466
-55.347
-53.201
-54.049
-52.533
-54.574
-58.441
-57.963
-63.136
-57.167
-54.474
-60.628
-51.744
-46.879
-49.932
-46.375
-47.935
-44.298
-41.210
Mag
0.001
0.001
0.001
0.001
0.001
0.001
0.000
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.002
0.001
0.001
0.001
0.001
0.002
0.001
0.002
0.001
0.002
0.001
0.001
0.002
0.002
0.002
0.002
0.002
0.002
0.001
0.001
0.001
0.001
0.002
0.001
0.003
0.005
0.003
0.005
0.004
0.006
0.009
Phase
74.582
111.433
82.329
104.610
-127.800
-139.623
135.455
147.814
107.728
160.703
154.081
142.052
137.503
146.597
95.390
109.746
129.344
93.162
102.403
109.088
105.331
126.300
113.278
93.294
103.385
155.593
99.686
97.414
119.408
88.985
118.334
103.431
75.833
92.297
69.756
108.679
67.753
22.773
59.413
112.809
127.139
153.671
122.651
96.883
107.536
100.387
78.726
80.639
S22
dB
-9.268
-12.649
-15.405
-17.425
-17.988
-18.079
-18.089
-18.056
-17.926
-18.032
-18.015
-17.578
-17.990
-18.079
-17.595
-17.674
-17.733
-17.607
-17.794
-17.546
-17.643
-17.286
-16.680
-16.775
-16.586
-16.405
-16.368
-16.046
-15.743
-15.643
-15.366
-15.139
-14.871
-14.738
-14.487
-14.153
-13.736
-13.394
-13.059
-12.764
-12.652
-12.185
-11.784
-11.499
-10.948
-10.276
-9.333
-8.077
Mag
0.344
0.233
0.170
0.135
0.126
0.125
0.125
0.125
0.127
0.125
0.126
0.132
0.126
0.125
0.132
0.131
0.130
0.132
0.129
0.133
0.131
0.137
0.147
0.145
0.148
0.151
0.152
0.158
0.163
0.165
0.170
0.175
0.180
0.183
0.189
0.196
0.206
0.214
0.222
0.230
0.233
0.246
0.258
0.266
0.284
0.306
0.341
0.395
Phase
119.399
86.348
56.944
4.474
-25.688
-40.543
-51.511
-56.680
-61.943
-67.733
-70.838
-75.742
-81.550
-83.191
-87.204
-91.933
-94.827
-97.411
-99.657
-101.921
-104.875
-105.042
-110.187
-113.869
-114.914
-117.350
-119.576
-122.641
-125.742
-129.586
-131.580
-134.722
-136.323
-139.034
-141.707
-145.685
-149.614
-152.750
-157.118
-161.086
-164.450
-174.591
177.006
170.747
163.908
155.748
147.162
136.626
Biasing and Operation
The AMMC-6241 is normally
biased with a positive supply
connected to both VD1 and VD2
bond pads through the 100pF
bypass capacitor as shown in
Figure 21. The recommended
supply voltage is 3 V. It is
important to place the bypass
capacitor as close to the die as
possible. No negative gate bias
voltage is needed for the
AMMC-6241. Input and
output matching are achieved
on-die, therefore no other
external component is required
besides one 100pF bypass
capacitor for the main supply.
The input and output are DCblocked with internal coupling
capacitors.
No ground wires are needed
because all ground connections
are made with plated throughholes to the backside of the
device.
Refer the Absolute Maximum
Ratings table for allowed DC
and thermal conditions.
Assembly Techniques
The backside of the MMIC
chip is RF ground. For
microstrip applications the
chip should be attached
directly to the ground plane
(e.g. circuit carrier or
heatsink) using electrically
conductive epoxy [1]
For best performance, the
topside of the MMIC should be
brought up to the same height
as the circuit surrounding it.
This can be accomplished by
mounting a gold plate metal
shim (same length and width
as the MMIC) under the chip
which is of correct thickness
to make the chip and adjacent
circuit the same height. The
amount of epoxy used for the
chip and/or shim attachment
should be just enough to
provide a thin fillet around the
bottom perimeter of the chip
or shim. The ground plan
should be free of any residue
that may jeopardize electrical
or mechanical attachment.
The location of the RF bond
pads is shown in Figure 12.
Note that all the RF input and
output ports are in a GroundSignal-Ground configuration.
RF connections should be kept
as short as reasonable to
minimize performance
degradation due to undesirable
series inductance. A single
VD1
bond wire is normally
sufficient for signal
connections, however double
bonding with 0.7 mil gold wire
or use of gold mesh [2] is
recommended for best
performance, especially near
the high end of the frequency
band.
Thermosonic wedge bonding is
preferred method for wire
attachment to the bond pads.
Gold mesh can be attached
using a 2 mil round tracking
tool and a tool force of
approximately 22 grams and a
ultrasonic power of roughly 55
dB for a duration of 76 +/- 8
mS. The guided wedge at an
untrasonic power level of 64
dB can be used for 0.7 mil
wire. The recommended wire
bond stage temperature is 150
+/- 2C.
Caution should be taken to not
exceed the Absolute Maximum
Notes:
[1] Ablebond 84-1 LM1 silver epoxy is
recommended.
[2] Buckbee-Mears Corporation, St. Paul, MN,
800-262-3824
VD2
RFout
RFin
Figure 18. AMMC-6241 Simplified Schematic
7
VD2
VD1
790
800
1110
1445
705
350
350
RFin
0
RFout
0
90
1810
Figure 19. AMMC-6241 Bonding pad locations
To VDD DC supply
100 pF Capacitor
V D1
RF INPUT
V D2
RF OUTPUT
AMMC-6240
Gold Plated Shim (Optional)
Figure 20. AMMC-6241 Assembly diagram
Ordering Information:
AMMC-6241-W10 = 10 devices per tray
AMMC-6241-W50 = 50 devices per tray
www.agilent.com/
semiconductors
For product information and a complete list
of distributors, please go to our web site.
Data subject to change.
Copyright © 2004-2005 Agilent Technologies, Inc.
Obsoletes 5989-3235EN
September 19, 2005
5989-3943EN
1900