HMC546LP2 / 546LP2E v00.0506 Typical Applications Features The HMC546LP2 / HMC546LP2E is ideal for: High Input P0.1 dB: +40 dBm Tx • LNA Protection, WiMAX, WiBro Low Insertion Loss: 0.4 dB • Cellular/PCS/3G, TD-SCDMA Infrastructure High IIP3: +67 dBm • Private Mobile Radio and Public Safety Handsets Positive Control: 0/+3V to 0/+8V • Automotive Telematics Failsafe Operation - Tx “On” When Unpowered Functional Diagram General Description The HMC546LP2 & HMC546LP2E are failsafe SPDT switches in leadless DFN surface mount plastic packages for use in transmit-receive, and LNA protection applications which require very low distortion and high power handling of up to 10 watts. The device can control signals from 200 - 2700 MHz* and is especially suited for WiMAX and WiBro repeaters, PMR and automotive telematic applications. The design provides exceptional P0.1 dB of +40 dBm and +65 dBm IIP3 on the Transmit (Tx) port. The failsafe topology allows the switch to provide a low loss path from RFC to Tx, when no DC power is available. SWITCHES - SMT 8 GaAs MMIC 10W FAILSAFE SWITCH 0.2 - 2.7 GHz Electrical Specifications, TA = +25°C, Vctl = 0/+3 Vdc, 50 Ohm System* Parameter Min. Frequency Range Insertion Loss Tx - RFC RFC - Rx Isolation Tx - RFC RFC - Rx Return Loss Tx - RFC RFC - Rx Input Power for 0.1 dB Compression Tx - RFC RFC - Rx Input Third Order Intercept (Two-tone input power = +19 dBm each tone) Switching Characteristics Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max Units 1805 - 1910 2010 - 2025 2300 - 2480 2500 - 2700 MHz 0.3 0.4 0.4 0.3 0.6 1.1 0.5 0.7 dB dB 15 22 0.6 0.7 23 30 15 20 25 25 38 19 0.7 0.6 22 27 15 25 20 25 40 21 39 19 0.8 1.5 20 30 10 30 22 10 41 21 36.5 17 38.5 19 38.5 18 0.8 1.1 15 40 dB dB 20 12 dB dB 40.5 20 dBm dBm Tx - RFC Vctl = 0/+3V RFC - Rx Tx - RFC Vctl = 0/+5V RFC - Rx 65 33 66 44 64 32 64 45 67 33 67 45 62 32 62 43 dBm dBm dBm dBm tRISE, tFALL (10/90% RF) tON, (50% CTL to 90% RF) tOFF (50% CTL to 10% RF) 21 102 36 21 102 36 21 102 36 21 102 36 ns ns ns TA = +25° C, Vctl & Vdd Unpowered Insertion Loss Tx - RFC Isolation RFC - Rx Return Loss Tx - RFC Input Power for 0.1 dB Compression Tx - RFC 0.3 15 23 0.6 0.4 15 25 38 40 22 0.7 0.6 15 20 39 41 20 0.8 0.5 10 22 36.5 38.5 38.5 15 dB dB 20 dB 40.5 dBm * Specifications and data reflect HMC546LP2 measured using the respective application circuits for each designated frequency band found herein 8 - 288 0.8 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC546LP2 / 546LP2E v00.0506 GaAs MMIC 10W FAILSAFE SWITCH 0.2 - 2.7 GHz Insertion Loss vs. Temperature, Rx with 1843 MHz Tuning 0 0 -0.5 -0.5 INSERTION LOSS (dB) -1 Tx, +25C -1.5 Tx, +85C Tx, -40C -2 -2.5 -3 1.75 -1 Tx, +25C -1.5 Tx, +85C -2.5 1.8 1.85 1.9 -3 1.75 1.95 1.8 FREQUENCY (GHz) 1.9 1.95 Return Loss with 1843 MHz Tuning 0 0 -5 -5 RETURN LOSS (dB) RFC to Tx RFC to Rx -10 -15 -20 -25 -30 -35 Tx, Input Tx, Output Rx, Input Rx, Output -10 -15 -20 -25 -30 -35 -40 1.8 1.85 1.9 -40 1.75 1.95 1.8 FREQUENCY (GHz) 1.85 1.9 1.95 FREQUENCY (GHz) Input IP3 vs. Voltage with 1843 MHz Tuning 75 70 65 60 IIP3 (dBm) ISOLATION (dB) 1.85 FREQUENCY (GHz) Isolation with 1843 MHz Tuning -45 1.75 8 Tx, -40C -2 SWITCHES - SMT INSERTION LOSS (dB) Insertion Loss vs. Temperature, Tx with 1843 MHz Tuning RFC to Tx RFC to Rx 55 50 45 40 35 30 25 20 3 4 5 6 7 8 VOLTAGE (Vdc) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 289 HMC546LP2 / 546LP2E v00.0506 GaAs MMIC 10W FAILSAFE SWITCH 0.2 - 2.7 GHz Insertion Loss vs. Temperature, Rx with 2015 MHz Tuning 0 0 -0.5 -0.5 INSERTION LOSS (dB) 8 INSERTION LOSS (dB) Insertion Loss vs. Temperature, Tx with 2015 MHz Tuning -1 -1.5 Tx, +25C Tx, +85C Tx, -40C -2 -3 1.9 -1.5 Rx, +25C Rx, +85C Rx, -40C -2 -2.5 1.95 2 2.05 -3 1.9 2.1 1.95 FREQUENCY (GHz) -5 -5 RETURN LOSS (dB) 0 RFC to Tx RFC to Rx -15 -20 -25 -30 -35 1.9 2.05 Tx, Input Tx, Output Rx, Input Rx, Output -10 -15 -20 -25 -30 1.95 2 2.05 -35 1.9 2.1 1.95 FREQUENCY (GHz) 2 2.05 FREQUENCY (GHz) Input IP3 vs. Voltage with 2015 MHz Tuning 75 70 65 IIP3 (dBm) 60 55 RFC to Tx RFC to Rx 50 45 40 35 30 25 20 3 4 5 6 7 8 VOLTAGE (Vdc) 8 - 290 2.1 Return Loss with 2015 MHz Tuning 0 -10 2 FREQUENCY (GHz) Isolation with 2015 MHz Tuning ISOLATION (dB) SWITCHES - SMT -2.5 -1 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 2.1 HMC546LP2 / 546LP2E v00.0506 GaAs MMIC 10W FAILSAFE SWITCH 0.2 - 2.7 GHz Insertion Loss vs. Temperature, Rx with 2350 MHz Tuning 0 0 -0.5 -0.5 INSERTION LOSS (dB) -1 Tx, +25C -1.5 Tx, +85C Tx, -40C -2 -2.5 -3 2.3 -1 -1.5 Rx, +85C Rx, -40C -2.5 2.35 2.4 2.45 -3 2.3 2.5 2.35 FREQUENCY (GHz) 2.4 2.45 2.5 FREQUENCY (GHz) Return Loss with 2350 MHz Tuning Isolation with 2350 MHz Tuning 0 0 -5 -5 RFC to Tx RFC to Rx RETURN LOSS (dB) -10 -15 -20 -25 -30 -10 -15 Tx, Input Tx, Output Rx, Input Rx, Output -20 -25 -35 -30 -40 -45 2.3 2.35 2.4 2.45 -35 2.3 2.5 2.35 FREQUENCY (GHz) 2.4 2.45 2.5 FREQUENCY (GHz) Input IP3 vs. Voltage with 2350 MHz Tuning 75 70 65 60 IIP3 (dBm) ISOLATION (dB) 8 Rx, +25C -2 SWITCHES - SMT INSERTION LOSS (dB) Insertion Loss vs. Temperature, Tx with 2350 MHz Tuning RFC to Tx RFC to Rx 55 50 45 40 35 30 25 20 3 4 5 6 7 8 VOLTAGE (Vdc) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 291 HMC546LP2 / 546LP2E v00.0506 GaAs MMIC 10W FAILSAFE SWITCH 0.2 - 2.7 GHz Insertion Loss vs. Temperature, Rx with 2600 MHz Tuning 0 0 -0.5 -0.5 INSERTION LOSS (dB) 8 INSERTION LOSS (dB) Insertion Loss vs. Temperature, Tx with 2600 MHz Tuning -1 Tx, +25C -1.5 Tx, +85C Tx, -40C -2 -3 2.5 -1.5 Rx, +25C -2 Rx, +85C Rx, -40C -2.5 2.55 2.6 2.65 -3 2.5 2.7 2.55 FREQUENCY (GHz) 2.65 0 Tx, Input Tx, Output Rx, Input Rx, Output -5 RFC to Tx RFC to Rx RETURN LOSS (dB) -5 -10 -15 -20 -25 -30 -10 -15 -20 -25 -30 -35 2.55 2.6 2.65 -40 2.5 2.7 2.55 FREQUENCY (GHz) 2.6 2.65 FREQUENCY (GHz) Input IP3 vs. Voltage with 2600 MHz Tuning 75 70 65 IIP3 (dBm) 60 55 RFC to Tx RFC to Rx 50 45 40 35 30 25 20 3 4 5 6 7 8 VOLTAGE (Vdc) 8 - 292 2.7 Return Loss with 2600 MHz Tuning 0 -35 2.5 2.6 FREQUENCY (GHz) Isolation with 2600 MHz Tuning ISOLATION (dB) SWITCHES - SMT -2.5 -1 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 2.7 HMC546LP2 / 546LP2E v00.0506 GaAs MMIC 10W FAILSAFE SWITCH 0.2 - 2.7 GHz Absolute Maximum Ratings Max. CW Input Power Max Channel Temp. 3V 5V 40 dBm 24 dBm 40 dBm 29 dBm 150 °C 150 °C Thermal Resistance Tx Port Rx Port 54 °C/W 68 °C/W 54 °C/W 86 °C/W Continuous Dissipated Power Tx Port Rx Port 1.12 W 73 mW 1.12 W 232 mW Supply Voltage (Vdd) +10 Vdc Control Voltage Range (Vctl) -0.2 to Vdd + 1.0 Vdc Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A Control Input Signal Path State Vctl Vdd RFC To Tx RFC to Rx 0.0 Vdd OFF ON Vdd Vdd ON OFF 0 0 ON OFF High Z High Z ON OFF Vdd = +3.0V to +8.0V Control Input Voltage Tolerances are ± 0.2 Vdc. 8 DC blocking capacitors are required at ports RFC, Tx and Rx. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing SWITCHES - SMT Tx Port Rx Port Truth Table NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC546LP2 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC546LP2E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] 546 XXX [2] 546 XXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 293 HMC546LP2 / 546LP2E v00.0506 GaAs MMIC 10W FAILSAFE SWITCH 0.2 - 2.7 GHz Pin Descriptions SWITCHES - SMT 8 8 - 294 Pin Number Function Description 1 Tx This pin is DC coupled and matched to 50 Ohms. 2 Vctl See Truth Table. 3 ACG External capacitor to ground is required. See application circuit herein. 4 Rx This pin is DC coupled and matched to 50 Ohms. 5 Vdd Supply Voltage 6 RFC This pin is DC coupled and matched to 50 Ohms. GND Package bottom has exposed metal paddle that must be connected to PCB RF ground. Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC546LP2 / 546LP2E v00.0506 GaAs MMIC 10W FAILSAFE SWITCH 0.2 - 2.7 GHz Application Circuit SWITCHES - SMT 8 Components for Selected Frequencies Tuned Frequency 1843 MHz 2015 MHz 2350 MHz 2600 MHz Evaluation PCB Number 110782 115201 115202 115203 C1, C3, C5 [1] 330 pF 330 pF 330 pF 330 pF C2 [2] 1.2 pF 0.8 pF 1.2 pF 0.7 pF C6 [2] 0.5 pF N/A N/A N/A C7 [2] 3.0 pF 2.4 pF 2.0 pF 1.5 pF L1 5.1nH [4] 4.3 nH [4] 2.0 nH [4] 1.6 nH [3] L2 [4] 4.3 nH 3.9 nH 2.4 nH 2.7 nH [1] DC blocking capacitors [2] ATC 0402 capacitors [3] Coilcraft 0603 inductor, 5% tolerance [4] Coilcraft 0402 inductor, 5% tolerance For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 295 HMC546LP2 / 546LP2E v00.0506 GaAs MMIC 10W FAILSAFE SWITCH 0.2 - 2.7 GHz Evaluation PCB SWITCHES - SMT 8 List of Materials for Evaluation PCB [1] Item Description J1 - J3 PCB Mount SMA RF Connector J4 - J6 DC Pin C1 - C3 [2] Capacitor, 0402 Pkg. L1 - L2 [2] Inductor, 0402 or LP2 0603 Pkg. U1 HMC546LP2 / HMC546LP2E T/R Switch PCB [3] 108992 Evaluation PCB [1] When requesting an evaluation board, please reference the appropriate evaluation PCB number listed in the table “Components for Selected Frequencies.” The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. [2] Please refer to ‘Components for Selected Frequencies’ table for values. [3] Circuit Board Material: Rogers 4350 8 - 296 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC546LP2 / 546LP2E v00.0506 GaAs MMIC 10W FAILSAFE SWITCH 0.2 - 2.7 GHz Notes: SWITCHES - SMT 8 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 297