HWS2352 March 2004 V2 SOP-8 Features • Non-Reflective Type • High Isolation • Low Power Consumption • Low Cost Surface Mount SOP-8 Package Description The HWS2352 is an integrated GaAs SPDT terminated switch. It is suitable for cellular phones, CT1, CT2, DECT, and Wireless LAN applications. Electrical Specifications at 25°C with 0, -5V Control Voltages Parameter Test Conditions Insertion Loss DC-0.5 GHz DC-1.0 GHz DC-2.0 GHz Isolation DC-0.5 GHz DC-1.0 GHz DC-2.0 GHz VSWR DC-1.0 GHz DC-2.0 GHz Input Power for One dB Compression 0.5-2.0 GHz Min. 50 38 23 Typ. Max. Unit 0.5 0.6 0.7 0.6 0.7 0.9 dB dB dB 52 40 26 dB dB dB 1.20:1 1.25:1 1.30:1 1.40:1 28 30 dBm Note: All measurements made in a 50 ohm system with 0/-5V control voltages, unless otherwise specified. Hexawave Inc. 2 Prosperity Road II, Science Park, Hsinchu, Taiwan. TEL 886-3-578-5100 FAX 886-3-577-0512 http://www.hw.com.tw All specifications are subject to change without notice. HWS2352 March 2004 V2 Absolute Maximum Ratings Parameter Absolute Maximum RF Input Power >100 MHz 35 dBm Control Voltage -10V Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Pin Out (Top View) $ # # $ ! % " Logic Table for Switch On-Path ___ VC RF1-RF2 RF1-RF3 1 0 Insertion Loss Isolation 0 1 Isolation Insertion Loss VC ‘1’ = -5V to -8V ‘0’ = 0V to -0.2V Hexawave Inc. 2 Prosperity Road II, Science Park, Hsinchu, Taiwan. TEL 886-3-578-5100 FAX 886-3-577-0512 http://www.hw.com.tw All specifications are subject to change without notice.