ICMIC ICM7352QG

ICM7372/7352/7332
ICmic
DUAL 12/10/8-BIT VOLTAGE-OUTPUT DACS
with Serial Interface and Adjustable Output Offset
IC MICROSYSTEMS
FEATURES
•
12/10/8-Bit Monotonic Dual DAC in 16 Lead
QSOP Package
•
Adjustable Output Offset
•
Wide Output Voltage Swing
•
100 µA per DAC at 3V Supply
•
On Board Reference
•
Three-wire SPI/QSP and Microwire Interface
Compatible
•
Serial Data Out for Daisy-Chaining
•
8 µS Full scale Settling Time
OVERVIEW
The ICM7372, ICM7352 and ICM7332 are 12-Bit, 10-Bit
and 8-Bit voltage output DACs respectively, with
guaranteed monotonic behavior. These DACs are
available in 16-pin QSOP package. They include
adjustable output offset for ease of use and flexibility. The
reference output is available on a separate pin and can be
used to drive external loads. The operating supply range is
2.7V to 5.5V.
The input interface is an easy to use three-wire SPI/QSPI
and Microwire compatible interface. The DAC has a
double buffered digital input for added flexibility.
APPLICATIONS
Battery-Powered Applications
Industrial Process Control
Digital Gain and Offset Adjustment
BLOCK DIAGRAM
REFB
REFA
ICM7372/7352/7332
DAC A
INPUT AND DAC LATCH
DAC B
INPUT AND DAC LATCH
REFERENCE
+
50 KΩ
VOA
50 KΩ
OSA
50 KΩ
VOB
50 KΩ
OSB
+
-
INPUT CONTROL LOGIC, REGISTERS AND LATCHES
SDO
SDI
Rev. A10
SCK
CS
CLR
ICmic reserves the right to change the specifications without prior notice.
1
ICM7372/7352/7332
ICmic
DUAL 12/10/8-BIT VOLTAGE-OUTPUT DACS
with Serial Interface and Adjustable Output Offset
IC MICROSYSTEMS
PACKAGE
16 Lead QSOP
AGND
1
16
VDD
VOA
2
15
VOB
OSA
3
14
OSB
REFA
4
13
REFB
CLR
5
12
N/C
CS
6
11
REFOUT
SDI
7
10
SDO
SCK
8
9
DGND
TOP VIEW
PIN DESCRIPTION (16 Lead QSOP)
Pin
Name
I/O
Description
1
AGND
I
Analog Ground
2
VOA
O
DAC A Output Voltage
3
OSA
I
DAC A Offset Adjustment
4
REFA
I
Reference Voltage Input to DAC A
5
CLR
I
Active Low Clear Input (CMOS). Resets All Registers to Zero. DAC outputs go to 0 V
6
CS
I
Active Low Chip Select (CMOS)
7
SDI
I
Serial Data Input (CMOS)
8
SCK
I
Serial Clock Input (CMOS)
9
DGND
I
Digital Ground
10
SDO
O
Serial data Output
11
REFOUT
O
Reference Output
12
N/C
-
No Connection
13
REFB
I
Reference Voltage Input to DAC B
14
OSB
I
DAC B Offset Adjustment
15
VOB
O
DAC B Output Voltage
16
VDD
I
Supply Voltage
Rev. A10
ICmic reserves the right to change the specifications without prior notice.
2
ICM7372/7352/7332
ICmic
DUAL 12/10/8-BIT VOLTAGE-OUTPUT DACS
with Serial Interface and Adjustable Output Offset
IC MICROSYSTEMS
ABSOLUTE MAXIMUM RATING
Symbol
Parameter
Value
Unit
VDD
Supply Voltage
-0.3 to 7.0
V
IIN
Input Current
+/- 25.0
mA
VIN_
Digital Input Voltage (SCK, SDI , CLR , CS )
-0.3 to 7.0
V
VIN_REF
Reference Input Voltage
-0.3 to 7.0
V
TSTG
Storage Temperature
-65 to +150
o
300
o
TSOL
Soldering Temperature
C
C
Note: Stress greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional
operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect reliability.
ORDERING INFORMATION
Part
Operating Temperature Range
Package
ICM7372
-40 oC to 85 oC
16-Pin QSOP
ICM7352
-40 oC to 85 oC
16-Pin QSOP
o
ICM7332
o
-40 C to 85 C
16-Pin QSOP
DC ELECTRICAL CHARACTERISTICS
(VDD = 2.7V to 5.5V, VOUT unloaded; all specifications TMIN to TMAX unless otherwise noted)
Symbol
Parameter
Test Conditions
Min
Typ.
Max
Unit
DC PERFORMANCE
ICM7372
N
Resolution
12
Bits
DNL
Differential Nonlinearity
(Notes 1 & 3)
0.4
+1.0
LSB
INL
Integral Nonlinearity
(Notes 1 & 3)
4.0
+12.0
LSB
ICM7352
N
Resolution
DNL
Differential Nonlinearity
(Notes 1 & 3)
10
0.1
+1.0
Bits
LSB
INL
Integral Nonlinearity
(Notes 1 & 3)
1.0
+3.0
LSB
ICM7332
N
Resolution
8
Bits
DNL
Differential Nonlinearity
(Notes 1 & 3)
0.05
+1.0
LSB
INL
Integral Nonlinearity
(Notes 1 & 3)
0.25
+0.75
LSB
GE
Gain Error
+0.5
% of FS
OE
Offset Error
+25
mV
5.5
V
1.5
mA
POWER REQUIREMENTS
VDD
Supply Voltage
IDD
Supply Current
Rev. A10
2.7
(Note 4)
0.6
ICmic reserves the right to change the specifications without prior notice.
3
ICM7372/7352/7332
ICmic
DUAL 12/10/8-BIT VOLTAGE-OUTPUT DACS
with Serial Interface and Adjustable Output Offset
IC MICROSYSTEMS
Symbol
Parameter
Test Conditions
Min
Typ.
Max
Unit
OUTPUT CHARACTERISTICS
Output Voltage Range
(Note 3)
0
VDD
Short Circuit Current
VOSC
ROUT
V
60
150
mA
Amp Output Impedance
At Mid-scale (Note 2)
At 0-scale (Note 2)
1.0
100
5.0
200
Ω
Ω
Output Line Regulation
VDD=2.7 to 5.5 V
0.4
3.0
mV/V
LOGIC INPUTS
VIH
Digital Input High
(Note 2)
VIL
Digital Input Low
(Note 2)
2.4
V
0.8
V
5
µΑ
1.25
1.3
V
0.8
4.0
mV/V
Digital Input Leakage
REFERENCE
VREFOUT
Reference Output
1.2
Reference Output Line
Regulation
AC ELECTRICAL CHARACTERISTICS
(VDD = 2.7V to 5.5V, VOUT unloaded; all specifications TMIN to TMAX unless otherwise noted)
Symbol
SR
Parameter
Test Conditions
Min
Slew Rate
Full-scale settling
Unit
V/µs
8
Mid-scale Transition Glitch
Energy
Note 2:
Note 3:
Note 4:
Max
2
Settling Time
Note 1:
Typ.
µs
nV-S
40
Linearity is defined from code 64 to 4095 (ICM7372)
Linearity is defined from code 16 to 1023 (ICM7352)
Linearity is defined from code 4 to 255 (ICM7332)
Guaranteed by design; not tested in production
See Applications Information
All digital Inputs at GND or VDD
TIMING CHARACTERISTICS
(VDD = 2.7V to 5.5V, all specifications TMIN to TMAX unless otherwise noted)
Symbol
Parameter
Test Conditions
Min
Typ
Max
Unit
t1
SCK Cycle Time
(Note 2)
30
ns
t2
Data Setup Time
(Note 2)
10
ns
t3
Data Hold Time
(Note 2)
10
ns
t4
SCK Falling edge to CS Rising Edge
(Note 2)
0
ns
t5
CS Falling Edge to SCK Rising Edge
(Note 2)
15
ns
t6
CS Pulse Width
(Note 2)
20
ns
t7
SDO Delay
(Note 2)
Rev. A10
ICmic reserves the right to change the specifications without prior notice.
100
ns
4
ICM7372/7352/7332
ICmic
DUAL 12/10/8-BIT VOLTAGE-OUTPUT DACS
with Serial Interface and Adjustable Output Offset
IC MICROSYSTEMS
t1
SCK
t3
t2
SDI
C3
C2
LSB
t5
Input Word for DAC N
t4
CS
t6
t7
SDO
C3
C2
Input Word for DAC N
Figure 1. Serial Interface Timing Diagram
Rev. A10
ICmic reserves the right to change the specifications without prior notice.
5
ICM7372/7352/7332
ICmic
DUAL 12/10/8-BIT VOLTAGE-OUTPUT DACS
with Serial Interface and Adjustable Output Offset
IC MICROSYSTEMS
CS
(ENABLE
SCK)
(UPDATE
OUTPUT)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
C3
C2
C1
C0
D11
D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
SCK
SDI
CONTROL WORD
DATA WORD
INPUT WORD W 0
SDO
C3
C2
C1
C0
D11
D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
INPUT WORD W -1
C3
INPUT WORD W 0
Figure 2. Serial Interface Operation Diagram
Rev. A10
ICmic reserves the right to change the specifications without prior notice.
6
ICM7372/7352/7332
ICmic
DUAL 12/10/8-BIT VOLTAGE-OUTPUT DACS
with Serial Interface and Adjustable Output Offset
IC MICROSYSTEMS
CONTENTS OF INPUT SHIFT REGISTER
ICM7372 (12-Bit DAC)
MSB
C3
LSB
C2
C1
C0
D11
D10
D9
D8
D7
CONTROL WORD
D6
D5
D4
D3
D2
D1
D0
DATA WORD
Figure 3. Contents of ICM7372 Input Shift Register
ICM7352 (10-Bit DAC)
MSB
C3
LSB
C2
C1
C0
D9
D8
D7
D6
CONTROL WORD
D5
D4
D3
D2
D1
D0
DATA WORD
X
X
X
X
Figure 4. Contents of ICM7352 Input Shift Register
ICM7332 (8-Bit DAC)
MSB
C3
LSB
C2
C1
C0
D7
D6
CONTROL WORD
D5
D4
D3
D2
D1
D0
DATA WORD
X
X
X
X
X
X
X
X
Figure 5. Contents of ICM7332 Input Shift Register
C3
C2
C1
C0
DATA (D11 – D0)
FUNCTION
0
0
0
0
Data
Load Input Latch DAC A
0
0
0
1
Data
Update DAC A
0
0
1
0
Data
Load Input Latch and Update DAC A
0
0
1
1
Data
Load Input Latch DAC B
0
1
0
0
Data
Update DAC B
0
1
0
1
Data
Load Input Latch and Update DAC B
0
1
1
0
X
No Operation
0
1
1
1
X
No Operation
1
0
0
0
X
No Operation
1
0
0
1
X
No Operation
1
0
1
0
X
No Operation
1
0
1
1
X
No Operation
1
1
0
0
Data
Load Input Latch All DACs
1
1
0
1
Data
Update DAC All DACs
1
1
1
0
Data
Load Input Latch and Update All DACs
1
1
1
1
X
No Operation
Table 1. Serial Interface Input Word
Rev. A10
ICmic reserves the right to change the specifications without prior notice.
7
ICM7372/7352/7332
ICmic
IC MICROSYSTEMS
DETAILED DESCRIPTION
The ICM7372 is a 12-bit voltage output dual DAC. The
ICM7352 is the 10-bit version of this family and the
ICM7332 is the 8-bit version. These devices have a 16-bit
data-in/data-out shift register and double buffered input.
The amplifier’s offset adjustment pins allow for a DC shift
in the DAC’s output.
This family of DACs employs a resistor string architecture
guaranteeing monotonic behavior. There is a 1.25V
onboard reference and an operating supply range of 2.7V
to 5.5V.
Reference Input
Each DAC has its own reference input pin which can be
driven from ground to VDD -1.5V. Determine the output
voltage using the following equation when output
adjustment pin, OSA or OSB is connected to ground 0V.
VOUT = 2 x (VREF x (D / (2n)))
Where D is the numeric value of DAC’s decimal input
code, VREF is the reference voltage and n is number of
bits, i.e. 12 for ICM7372, 10 for ICM7352 and 8 for
ICM7332.
Reference Output
The reference output is nominally 1.25V and is brought out
to a separate pin and can be used to drive external loads.
The outputs will nominally swing from 0 to 2.5V when
using this reference.
DUAL 12/10/8-BIT VOLTAGE-OUTPUT DACS
with Serial Interface and Adjustable Output Offset
The Chip Select pin which is the 6th pin of 16 QSOP
package is active low. This pin must be low when data is
being clocked into the part. After the 16th clock pulse the
Chip Select pin must be pulled high (level-triggered) for
the data to be transferred to an input bank of latches. This
pin also disables the SCK pin internally when pulled high
and the SCK pin must be low before this pin is pulled back
low. As the Chip Select pin is pulled high the shift register
contents are transferred to a bank of 16 latches (see
Figure 2.). The 4 bit control word (C3~C0) is then decoded
and the DAC is updated or loaded depending on the
control word (see Table 1).
The DAC has a double-buffered input with an input latch
and a DAC latch. The DAC output will swing to its new
value when data is loaded into the DAC latch. The user
has three options: loading only the input latch, updating
the DAC with data previously loaded into the input latch or
loading the input latch and updating the DAC at the same
time with a new code.
Serial Data Output
SDO (Serial Data Output) is the internal shift register’s
output. This pin can be used as the data output pin for
Daisy-Chaining and data readback. It is compatible with
SPI/QSPI and Microwire interfaces.
Power-On Reset
There is a power-on reset on board that will clear the
contents of all the latches to all 0s on power-up and the
DAC voltage output will go to ground.
APPLICATIONS INFORMATION
Output Amplifier
The Dual DAC has 2 output amplifiers with a wide output
voltage swing. The actual swing of the output amplifiers
will be limited by offset error and gain error. See the
Applications Information Section for a more detailed
discussion.
The offset adjustment pins, either OSA or OSB can be
used to produce an adjustable offset voltage at the output.
For instance, to achieve a 1V offset, apply -1V to the offset
adjustment pin to produce an output range from 1V to (1V
+ VREF x 2). Note that the DAC’s output range is still
limited by offset error and gain error. See the Applications
Information Section for a more detailed discussion.
The output amplifier can drive a load of 2.0 kΩ to VDD or
GND in parallel with a 500 pF load capacitance.
The output amplifier has a full-scale typical settling time of
8 µs and it dissipates about 100 µA with a 3V supply
voltage.
Serial Interface and Input Logic
This dual DAC family uses a standard 3-wire connection
compatible with SPI/QSPI and Microwire interfaces. Data
is loaded in 16-bit words which consist of 4 address and
control bits (MSBs) followed by 12 bits of data (see table
1). The ICM7352 has the last 2 LSBs as don’t care and the
ICM7332 has the last 4 LSBs as don’t care. The DAC is
double buffered with an input latch and a DAC latch.
Power Supply Bypassing and Layout
Considerations
As in any precision circuit, careful consideration has to be
given to layout of the supply and ground. The return path
from the GND to the supply ground should be short with
low impedance. Using a ground plane would be ideal. The
supply should have some bypassing on it. A 10 µF
tantalum capacitor in parallel with a 0.1 µF ceramic with a
low ESR can be used. Ideally these would be placed as
close as possible to the device. Avoid crossing digital and
analog signals, specially the reference, or running them
close to each other.
Output Swing Limitations
The ideal rail-to-rail DAC would swing from GND to VDD.
However, offset and gain error limit this ability. Figure 6
illustrates how a negative offset error will affect the output.
The output will limit close to ground since this is single
supply part, resulting in a dead-band area. As a larger
input is loaded into the DAC the output will eventually rise
above ground. This is why the linearity is specified for a
starting code greater than zero.
Figure 7 illustrates how a gain error or positive offset error
will affect the output when it is close to VDD. A positive
gain error or positive offset will cause the output to be
limited to the positive supply voltage resulting in a deadband of codes close to full-scale.
Serial Data Input
SDI (Serial Data Input) pin is the data input pin for all
DACs. Data is clocked in on the rising edge of SCK which
has a Schmitt trigger internally to allow for noise immunity
on the SCK pin. This specially eases the use for optocoupled interfaces.
Rev. A10
ICmic reserves the right to change the specifications without prior notice.
8
ICM7372/7352/7332
ICmic
DUAL 12/10/8-BIT VOLTAGE-OUTPUT DACS
with Serial Interface and Adjustable Output Offset
IC MICROSYSTEMS
DEADBAND
NEGATIVE
OFFSET
Figure 6. Effect of Negative Offset
OFFSET AND
GAIN ERROR
VDD
DEADBAND
POSITIVE
OFFSET
Figure 7. Effect of Gain Error and Positive Offset
Rev. A10
ICmic reserves the right to change the specifications without prior notice.
9
ICM7372/7352/7332
ICmic
IC MICROSYSTEMS
DUAL 12/10/8-BIT VOLTAGE-OUTPUT DACS
with Serial Interface and Adjustable Output Offset
PACKAGE INFORMATION
Rev. A10
ICmic reserves the right to change the specifications without prior notice.
10
ICM7372/7352/7332
ICmic
DUAL 12/10/8-BIT VOLTAGE-OUTPUT DACS
with Serial Interface and Adjustable Output Offset
IC MICROSYSTEMS
ORDERING INFORMATION
ICM73X2 P G
Device
7 - ICM7372
5 - ICM7352
3 - ICM7332
Rev. A10
G = RoHS Compliant Lead-Free package.
Blank = Standard package. Non lead-free.
Package
Q = 16-Lead QSOP
ICmic reserves the right to change the specifications without prior notice.
11