A6011/SMA6011 2000 TO 6000 MHz CASCADABLE AMPLIFIER · LOW NOISE FIGURE: 1.5 dB (TYP.) · MEDIUM OUTPUT POWER: +18 dBm (TYP.) · HIGH EFFICIENCY: 58 mA (TYP.) @ +5 Vdc · PHEMT AMPLIFIER Typical Performance @ 25°C Specifications (Rev. Date: 6/01)* Characteristics Typical Frequency Small Signal Gain (min.) Gain Flatness (max.) Reverse Isolation Noise Figure (max.) Power Output @ 1 dB comp. (min.) IP3 IP2 Second Order Harmonic IP VSWR Input / Output (max.) DC Current @ 5 Volts (max.) 1.5-6.0 GHz 14.8 dB ±0.6 dB 16 dB 1.5 dB 18.0 dBm +30 dBm +45 dBm +50 dBm 1.9:1 / 1.9:1 58 mA Guaranteed 0°° to 50°°C -54°° to +85°°C 2.0-6.0 GHz 13.5 dB ±0.9 dB 2.0-6.0 GHz 12.5 dB ±1.1 dB 2.5 dB 16.5 dBm 3.0 dB 16.0 dBm 2.1:1 / 2.1:1 65 mA 2.2:1 / 2.2:1 70 mA * Measured in a 50-ohm system at +5 Vdc Nominal. Subject to change without notice. Absolute Maximum Ratings Storage Temperature Max. Case Temperature Max. DC Voltage Max. Continuous RF Input Power Max. Short Term RF Input Power (1 minute max.) Max. Peak Power (3 µsec max.) “S” Series Burn-in Temperature (Case) -62° to +150°C 125°C +7 Volts +13 dBm 100 mW 0.25 W 125°C Thermal Data: Vcc = 5 Vdc Thermal Resistance θjc Transistor Power Dissipation Pd Junction Temperature Rise Above Case Tjc °C/W W °C Outline Drawings Package Figure Model TO-8 BG A6011 Surface Mount AA SMA6011 SMA Connectorized CE CA6011 Specifications subject to change without notice. • North America: 1-800-366-2266 Visit www.macom.com for complete contact and product information.